journal article·2004-09

Low stress creep behaviour of 7075 high strength aluminium alloy

V. Srivastava, J.P. Williams, K.R. McNee, G.W. Greenwood, H. Jones

Materials Science and Engineering: A· Volume 382· Issue 1-2
Publisher page

Abstract

Abstract Creep behaviour of 7075 aluminium alloy has been investigated in the temperature range 350–410 °C and at applied tensile stresses between 1.8 and 6.3 MPa. The as-received material was thermomechanically processed to obtain 48 μm grain size, with grain growth to 78 μm during creep and a thixoforged sample was also investigated. A transition from a region of low stress exponent (≈1) to a higher stress exponent (≈5) was observed on increasing the stress above 5 MPa. The measured creep rates at low stresses were normalised for grain growth and found to be within a factor of 2 of the rates expected from the Nabarro–Herring equation. The value of activation energy for creep was found to be close to 147 kJ/mol. The measured rates were found to conform to rates measured at constant strain rates and comparably low stresses for superplastic 7075 aluminium alloy with comparable microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Ruano · Mater. Sci. Eng. A · 1993 · 165 · 13310.1016/0921-5093(93)90747-3 ↗
2. Burton · Mater. Sci. Eng. A · 1995 · 191 · 13510.1016/0921-5093(94)09643-0 ↗
3. Ruano · Mater. Sci. Eng. A · 1996 · 211 · 6610.1016/0921-5093(95)10090-3 ↗
4. Langdon · Scripta Mater. · 1996 · 35 · 73710.1016/1359-6462(96)00219-9 ↗
5. Blum · Physica Stat. Sol. A · 1999 · 171 · 46710.1002/(SICI)1521-396X(199902)171:2<467::AID-PSSA467>3.0.CO;2-8 ↗
6. J. Wadsworth, O.A. Ruano, O.D. Sherby, in: R.S. Mishra, A.K. Mukherjee, K.L. Murty (Eds.), Creep Behaviour of Advanced Materials for the 21st Century, TMS, Warrendale, PA, 1999, pp. 425–440.
7. K.R. McNee, PhD thesis, University of Sheffield, 2000.
8. Nabarro · Phys. Stat. Sol. A · 2000 · 182 · 62710.1002/1521-396X(200012)182:2<627::AID-PSSA627>3.0.CO;2-E ↗
9. Ginter · Acta Mater. · 2001 · 49 · 26310.1016/S1359-6454(00)00316-5 ↗
10. McNee · Scripta Mater. · 2001 · 44 · 35110.1016/S1359-6462(00)00570-4 ↗
11. K.R. McNee., H. Jones, G.W. Greenwood, in: J.D. Parker (Ed.), Proceedings of the Ninth International Conference on Creep and Fracture of Engineering Materials and Structures, The Institute of Metals, London, 2001, pp. 185–195.
12. K.R. McNee, V. Srivastava, G.W. Greenwood, H. Jones, in: R.S. Mishra, J.C. Earthman, S.V. Raj (Eds.), Creep Deformation: Fundamentals and Applications, TMS, Warrendale, PA, 2002, pp. 95–104.
13. B. Wilshire, C.J. Palmer, in: R.S. Mishra, J.C. Earthman, S.V. Raj (Eds.), Creep Deformation: Fundamentals and Applications, TMS, Warrendale, PA, 2002, pp. 51–60.
14. F.R.N. Nabarro, in: Report of a Conference on the Strength of Solids, The Physical Society, London, 1948, pp. 75–90.
15. Herring · J. Appl. Phys. · 1950 · 21 · 43710.1063/1.1699681 ↗
16. Jones · Mater. Sci. Eng. · 1969 · 4 · 10610.1016/0025-5416(69)90050-0 ↗
17. B. Burton, Diffusional Creep in Polycrystalline Materials, Trans Tech Publications, Aedermannsdorf, 1977.
18. T. Norbygraard, J.B. Bilde-Sorensen, in: J.D. Parker (Ed.), Proceedings of the Ninth International Conference on Creep and Fracture of Engineering Materials and Structures, Institute of Metals, London, 2001, pp. 15–20.
19. Srivastava · Acta Mater. · 2003 · 51 · 461110.1016/S1359-6454(03)00298-2 ↗
20. Burton · Phil. Mag. · 1972 · 25 · 64510.1080/14786437208228897 ↗
21. Shin · Acta Mater. · 1997 · 45 · 519510.1016/S1359-6454(97)00185-7 ↗
22. Ashby · Acta Metall. · 1973 · 21 · 14910.1016/0001-6160(73)90057-6 ↗
23. Li · Mater. Sci. Technol. · 1997 · 13 · 1710.1179/mst.1997.13.1.17 ↗
24. Wert · Metall. Trans. A · 1981 · 12 · 126710.1007/BF02642340 ↗
25. V. Srivastava, PhD thesis, University of Sheffield, 2003.
26. E.E. Underwood, Quantitative Stereology, Addison-Wesley, New York, 1970.
27. Dix · Aeronaut. Eng. Rev. · 1956 · 15 · 40
28. H.R. Voerhees, J.W. Freeman, Report on the Elevated Temperature Properties of Al and Mg Alloys, in: ASTM STP No 201, 1960, pp. 147–159.
29. Takeuchi · Sumitomo Light Metal Tech. Rep. · 1968 · 9 · 61
30. Embury · J. Inst. Met. · 1972 · 100 · 153
31. Park · J. Mater. Sci. · 1996 · 31 · 271910.1007/BF00687306 ↗
32. J.G. Kauffman (Ed.), Properties of Aluminium Alloys, ASM, Metals Park, OH, 1999, pp. 211–217.
33. H.J. Frost, M.F. Ashby, Deformation Mechanism Maps, Pergamon Press, Oxford, 1982.
34. Harper · Acta Metall. · 1957 · 5 · 65410.1016/0001-6160(57)90112-8 ↗
35. Langdon · Acta Metall. · 1982 · 30 · 88110.1016/0001-6160(82)90086-4 ↗
36. Burton · J. Mater. Sci. · 1993 · 28 · 490010.1007/BF00361153 ↗
37. Barrett · Mater. Sci. Eng. · 1972 · 10 · 3310.1016/0025-5416(72)90063-8 ↗
38. Mohamed · Metall. Trans. · 1973 · 4 · 93510.1007/BF02645593 ↗
39. Kwon · Metall. Mater. Trans. A · 1999 · 30 · 203710.1007/s11661-999-0014-z ↗
40. Yang · Mater. Trans. · 2002 · 43 · 240010.2320/matertrans.43.2400 ↗
41. Shin · Scripta Mater. · 1999 · 41 · 26910.1016/S1359-6462(99)00160-8 ↗