Experimental studies on the punch shear characterization of satin weave graphite/epoxy composites at room and elevated temperatures
Source abstract
Abstract
Abstract In many situations, composite structures are subjected to dynamic loading. To design such structures, there is a need of dynamic material properties. In the current investigation, a compression split Hopkinson pressure bar (SHPB) was modified to load the samples in punch shear mode. Experimental studies were conducted to characterize 24-layer satin weave graphite/epoxy laminate samples. Laminates were manufactured using vacuum assisted resin infusion molding (VARIM) process. Samples of nominal size 26 mm ×13 mm ×4 mm were subjected to dynamic punch shear test at three different pressure settings that yielded strain rates in the range of 1500–3500 s−1 at room and elevated temperatures of 51.7, 79.4 and 107.2 °C. Dynamic shear stress–strain properties were evaluated. Failure modes were characterized through optical and scanning electron microscopy. Results of the tests indicate that the dynamic shear strength increases with increase with the strain rate and decreases with temperature for a given strain rate. Higher temperature causes the softening of matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Energetic Materials and Combustion · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Sierakowski · Appl. Mech. Rev. · 1997 · 50 · 74110.1115/1.3101860 ↗
2. Harding · Key Eng. Mater. · 1998 · 141–1431 · 40310.4028/www.scientific.net/KEM.141-143.403 ↗
3. Al-Hassani · Key Eng. Mater. · 1998 · 141–143 · 42710.4028/www.scientific.net/KEM.141-143.427 ↗
4. Hammouda · J. Mater. Process. Technol. · 1998 · 77 · 32710.1016/S0924-0136(97)00436-6 ↗
5. Barré · Comp. Part A: Appl. Sci. Manuf. · 1996 · 27A · 116910.1016/1359-835X(96)00075-9 ↗
6. Adams · J. Comp. Mater. · 1990 · 24 · 25610.1177/002199839002400302 ↗
7. Harding · Comp. Sci. Technol. · 1994 · 53 · 34710.1016/0266-3538(94)90104-X ↗
8. Hallett · Comp. Sci. Technol. · 1999 · 59 · 74910.1016/S0266-3538(98)00117-1 ↗
9. Hiley · Comp. Part A: Appl. Sci. Manuf. · 1997 · 28 · 17110.1016/S1359-835X(96)00112-1 ↗
10. Werner · J. Comp. Mater. · 1986 · 20 · 36510.1177/002199838602000404 ↗
11. Bouette · Comp. Sci. Technol. · 1992 · 45 · 31310.1016/0266-3538(92)90046-6 ↗
12. Harding · Comp. Sci. Technol. · 1992 · 45 · 16110.1016/0266-3538(92)90038-5 ↗
13. Riendeau · J. Comp. Mater. · 1996 · 30 · 149410.1177/002199839603001305 ↗
14. Nemes · Int. J. Impact Eng. · 1998 · 21 · 9710.1016/S0734-743X(97)00026-2 ↗
15. M.V. Hosur, M. Adya, J. Alexander, U.K. Vaidya, A. Mayer, S. Jeelani, J. Reinforced Plast. Comp. 22 (2003).10.1016/S0263-8223(02)00247-7 ↗
16. Hsiao · J. Comp. Mater. · 1999 · 33 · 162010.1177/002199839903301703 ↗
17. Li · Composites, Part A · 2000 · 31 · 53710.1016/S1359-835X(99)00102-5 ↗