journal article·2006-03

Mechanical and machining properties of X38CrMoV5-1/Al2O3 metal matrix composites and components

K. Lemster, T. Graule, T. Minghetti, C. Schelle, J. Kuebler

Materials Science and Engineering: A· Volume 420· Issue 1-2
Publisher page

Abstract

Abstract Large plates and discs of X38CrMoV5-1/Al 2 O 3 metal matrix composites (MMCs) were produced via Ti-activated pressureless melt infiltration. After machining the plates were characterised using non-destructive testing methods (X-ray and ultrasonic C-scans) in order to investigate the quality of infiltration before preparing bars for four-point-bending tests. Subsequently, parts of the plates were used for machining tests, including sawing, welding and spark erosion. Furthermore, MMC discs were prepared for wear tests. The as-infiltrated MMC discs show a low wear rate of 1.6 × 10 −10 –2.2 × 10 −10 m/s, which is 2–3 times better than the hardened steel itself, or 12–17 times better compared to X38CrMoV5-1 in the annealed state. As a first component a wire-drawing die was fabricated and successfully tested for drawing Al alloy AA6082 and steel 16MnCr5.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Kara · J. Eur. Ceram. Soc. · 2004 · 24 · 309110.1016/j.jeurceramsoc.2003.11.004 ↗
2. Berns · Wear · 2003 · 254 · 4710.1016/S0043-1648(02)00300-9 ↗
3. Cubadda · Microchem. J. · 2005 · 79 · 9710.1016/j.microc.2004.06.011 ↗
4. Pagounis · Mater. Res. Bull. · 1996 · 31 · 127710.1016/0025-5408(96)00111-0 ↗
5. Pagounis · Compos. Sci. Technol. · 1996 · 56 · 132910.1016/S0266-3538(96)00101-7 ↗
6. Pelleg · Mater. Sci. Eng. A · 1999 · 269 · 22510.1016/S0921-5093(99)00158-6 ↗
7. Travitzky · Mater. Sci. Eng. A · 2003 · 344 · 24510.1016/S0921-5093(02)00419-7 ↗
8. Chue · Compos. Sci. Technol. · 1999 · 59 · 15710.1016/S0266-3538(97)00187-5 ↗
9. Zhang · Mater. Lett. · 2003 · 57 · 145310.1016/S0167-577X(02)01006-6 ↗
10. Demir · Compos. Sci. Technol. · 2004 · 64 · 206710.1016/j.compscitech.2004.02.015 ↗
11. Miserez · Acta Mater. · 2004 · 52 · 533110.1016/j.actamat.2004.07.038 ↗
12. Krauss · Mater. Sci. Eng. A · 2002 · 337 · 31510.1016/S0921-5093(02)00044-8 ↗
13. Lemster · 2004 · 2523
14. Lemster · Mater. Sci. Eng. A · 2005 · 393 · 22910.1016/j.msea.2004.10.025 ↗
15. S. Fischer, Study of the Reaction Mechanism during Reactive Melt Infiltration Promoted by an Activator, Diploma thesis, University of Fribourg, Switzerland, 2003.
16. Gogotsi · Theor. Appl. Frac. Mech. · 2001 · 36 · 11510.1016/S0167-8442(01)00062-3 ↗
17. Bargel · 1988
18. Buergel · 2001
19. W. Prechtl, Verschleissverhalten mehrphasiger Werkstoffe unter hydroabrasiven Bedingungen, PhD thesis, University of Erlangen, Germany, 2001.
20. Chakraborty · Sci. Technol. Weld. Joining · 2002 · 7 · 8810.1179/136217102225001322 ↗