journal article·2010-06

In-situ studies of stress- and magnetic-field-induced phase transformation in a polymer-bonded Ni–Co–Mn–In composite

D.M. Liu, Z.H. Nie, G. Wang, Y.D. Wang, D.E. Brown, J. Pearson, P.K. Liaw, Y. Ren

Materials Science and Engineering: A· Volume 527· Issue 15
Publisher page

Abstract

Abstract A polymer-bonded Ni 45 Co 5 Mn 36.6 In 13.4 ferromagnetic shape–memory composite was fabricated, having magnetic-field-driven shape recovery properties. The thermo-magnetization curves of the composite suggested that the magnetic-field-induced reverse martensitic transformation occurs in the composite. The effects of temperature, stress, and magnetic-field on the phase transformation properties were systematically investigated using an in-situ high-energy X-ray diffraction technique. A temperature-induced reversible martensitic phase transformation was confirmed within the composite, showing a broad phase transformation interval. Stress-induced highly textured martensite was observed in the composite during uniaxial compressive loading, with a residual strain after unloading. The origin of the textured martensite can be explained by the grain-orientation-dependent Bain distortion energy. A recovery strain of ∼1.76% along the compression direction was evidenced in the pre-strained composite with an applied magnetic-field of 5 T. This recovery was caused by the magnetic-field-induced reverse martensitic phase transformation. The phase transformation properties of the ferromagnetic shape–memory composite, different from its bulk alloys, can be well explained by the Clausius–Clapeyron relation. The large magnetic-field-induced strain, together with good ductility and low cost, make the polymer-bonded Ni–Co–Mn–In composites potential candidates for magnetic-field-driven actuators.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. O’Handley · J. Appl. Phys. · 1998 · 83 · 326310.1063/1.367094 ↗
2. Karaca · Adv. Funct. Mater. · 2009 · 19 · 98310.1002/adfm.200801322 ↗
3. Sozinov · Appl. Phys. Lett. · 2002 · 80 · 174610.1063/1.1458075 ↗
4. Murray · Appl. Phys. Lett. · 2000 · 77 · 88610.1063/1.1306635 ↗
5. Karaca · Acta Mater. · 2006 · 54 · 23310.1016/j.actamat.2005.09.004 ↗
6. Kainuma · Nature · 2006 · 439 · 95710.1038/nature04493 ↗
7. Wang · Appl. Phys. Lett. · 2007 · 90
8. Wang · Acta Mater. · 2008 · 56 · 91310.1016/j.actamat.2007.10.045 ↗
9. Feuchtwanger · J. Appl. Phys. · 2003 · 93 · 852810.1063/1.1557762 ↗
10. Feuchtwanger · J. Appl. Phys. · 2005 · 9710.1063/1.1857653 ↗
11. Scheerbaum · Acta Mater. · 2007 · 55 · 270710.1016/j.actamat.2006.12.008 ↗
12. Scheerbaum · J. Appl. Phys. · 2007 · 10110.1063/1.2670414 ↗
13. Hosoda · Sci. Technol. Adv. Mater. · 2004 · 5 · 50310.1016/j.stam.2004.02.009 ↗
14. Margulies · Science · 2001 · 291 · 239210.1126/science.1057956 ↗
15. Offerman · Science · 2002 · 298 · 100310.1126/science.1076681 ↗
16. Schmidt · Science · 2004 · 305 · 22910.1126/science.1098627 ↗
17. Wang · Adv. Mater. · 2005 · 17 · 122110.1002/adma.200401420 ↗
18. Sánchez Llamazares · Appl. Phys. Lett. · 2008 · 9210.1063/1.2827179 ↗
19. Ito · Appl. Phys. Lett. · 2008 · 9210.1063/1.2833699 ↗
20. Efstathiou · Acta Mater. · 2008 · 56 · 379110.1016/j.actamat.2008.04.033 ↗
21. Oikawa · Appl. Phys. Lett. · 2002 · 81 · 520110.1063/1.1532105 ↗
22. Krenke · Phys. Rev. B · 2005 · 7210.1103/PhysRevB.72.014412 ↗
23. Feng · Mater. Lett. · 2009 · 63 · 96510.1016/j.matlet.2009.01.035 ↗
24. Wang · Phys. Rev. B · 2007 · 75
25. Nie · Metall. Mater. Trans. A · 2008 · 39A · 311310.1007/s11661-008-9600-8 ↗
26. Conti · J. Mech. Phys. Solids · 2007 · 55 · 146210.1016/j.jmps.2006.12.008 ↗
27. Duenas · J. Appl. Phys. · 2000 · 87 · 469610.1063/1.373133 ↗