Thermal treatment of PM-tool steel alloyed with niobium
Source abstract
Abstract
Abstract The work is aimed at describing the influence of thermal treatment on the properties of a tool steel containing (in wt.%) 2.5% C, 3.3% Si, 6.2% Cr, 2.2% Mo, 2.6% V, 2.6% Nb, 1.0% W prepared by the powder metallurgy process. Alloying with niobium positively affects the microstructure, the mechanical properties and the performance of the steel. The microstructure of the hardened steel is composed of a martensitic matrix, retained austenite and various types of carbide. During tempering of the hardened steel at the temperatures above 480 °C precipitation of very fine carbides occurs, which results in secondary hardening. The optimum thermal treatment of the steel is austenitisation at 1050–1100 °C, nitrogen cooling and tempering at 540 °C (3×1 h).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Takigawa · Powder Metall. · 1981 · 24 · 19610.1179/pom.1981.24.4.196 ↗
2. Matteazzi · Mater. Sci. Eng. A · 1998 · 248 · 1910.1016/S0921-5093(98)00525-5 ↗
3. Jakubeczyova · Kovove Mater. · 2001 · 39 · 278
4. Pippel · Mater. Characterisation · 1999 · 43 · 4110.1016/S1044-5803(99)00003-0 ↗
5. F. Preisser, Proceedings of 18th National Conference on Heat Treatment with International Participation, Brno, Czech Republic, 28–30 November, Asociace pro tepelné zpracovánı́ kovů, Praha, 2002, p. 189.
6. Riedl · Steel Res. · 1987 · 58 · 33910.1002/srin.198700230 ↗
7. Lee · Scr. Mater. · 1998 · 39 · 113310.1016/S1359-6462(98)00270-X ↗
8. Kheirandish · ISIJ Int. · 1997 · 37 · 72110.2355/isijinternational.37.721 ↗
9. Dobrzański · J. Mater. Process. Technol. · 1997 · 63 · 53110.1016/S0924-0136(96)02678-7 ↗
10. Kheirandish · Steel Res. · 1997 · 68 · 45710.1002/srin.199700582 ↗
11. Kheirandish · Metall · 1999 · 53 · 339
12. Dobrzański · J. Mater. Process. Technol. · 1998 · 77 · 18010.1016/S0924-0136(97)00416-0 ↗
13. Fiset · J. Mater. Sci. Lett. · 1993 · 12 · 61510.1007/BF00465569 ↗
14. M. Pavlı́čková, D. Vojtěch, P. Stolař, P. Jurči, Proceedings of EURO PM 2001 Congress, Nice, France, 22–24 October, EPMA, Shrewsbury, vol. 1, 2001, p. 214.
15. German · 1994
16. Information sheet: Vanadis 6-Super Clean High performance powder metallurgical cold work tool steel, Uddeholm Tooling AB, Sweden, available in: http://www.uddeholm.com/UTAB/PDF/FACTS/VANADIS_6_ENGLISH_00403.PDF.
17. Karagöz · Metall. Trans. A · 1988 · 19A · 139510.1007/BF02674013 ↗
18. Sthremel’ · Met. Sci. Heat Treat. · 1999 · 41 · 14610.1007/BF02465798 ↗
19. Kim · Metall. Trans. A · 1982 · 13A · 18510.1007/BF02643307 ↗
20. Fareed · Int. J. Powder Metall. · 1990 · 26 · 367
21. Karagöz · Steel Res. · 1987 · 58 · 35310.1002/srin.198700231 ↗
22. Goldschmidt · 1967
23. Moustafa · Mater. Lett. · 2000 · 42 · 37110.1016/S0167-577X(99)00213-X ↗
24. Hribernik · Met. Powder Rep. · 1991 · 46 · 5810.1016/0026-0657(91)91760-4 ↗
25. J. Pluhař, Nauka o materiálech, SNTL, Praha, 1989, in Czech.