journal article·2012-01

Enhanced upper shelf energy by ultrafine elongated grain structures in 1100MPa high strength steel

M. Jafari, Y. Kimura, K. Tsuzaki

Publisher page

Abstract

Abstract The ultrafine elongated grain (UFEG) structure with strong //RD fiber deformation texture was produced by warm caliber-rolling at 500 °C and final tempering at 550 °C, namely tempforming in the 1100 MPa medium carbon-low alloy steel with ultralow phosphorus and sulfur concentrations. Charpy impact tests were performed at temperature range of −196 °C to 150 °C on the UFEG structure along with a conventional quenched and tempered (QT) structure. A remarkable increase in upper shelf energy of 150 J was obtained in the UFEG structure without delamination, while that of QT structure was 97 J. The UFEG structures tempered at higher temperatures of 625 and 700 °C showed remarkable increase in Charpy absorbed energy from 150 J to 187 J and 203 J. Also, the QT structure absorbed almost same energy as UFEG structure at 700 °C. The enhanced toughness was discussed with tensile ductility, void nucleation and growth, and their relations to microstructure including the //RD fiber deformation texture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Stolyarov · Appl. Phys. Lett. · 2006 · 88 · 4190510.1063/1.2167800 ↗
2. Morris · Science · 2008 · 320 · 102210.1126/science.1158994 ↗
3. 2001
4. Guo · Acta Mater. · 2004 · 52 · 551110.1016/j.actamat.2004.08.011 ↗
5. Karimpoor · Scr. Mater. · 2007 · 56 · 20110.1016/j.scriptamat.2006.10.018 ↗
6. Van Stone · Int. Mater. Rev. · 1985 · 30 · 15710.1179/imr.1985.30.1.157 ↗
7. Fan · Mater. Sci. Eng. A · 1995 · 191 · 7310.1016/0921-5093(94)09621-3 ↗
8. Venkateswara Rao · Metall. Trans. A · 1989 · 20 · 48510.1007/BF02653929 ↗
9. Bourell · Metall. Trans. A · 1983 · 14 · 248710.1007/BF02668890 ↗
10. Bourell · Metall. Trans. A · 1983 · 14 · 256310.1007/BF02668900 ↗
11. Tsuji · Mater. Trans. · 2004 · 45 · 227210.2320/matertrans.45.2272 ↗
12. Kimura · Scr. Mater. · 2007 · 57 · 46510.1016/j.scriptamat.2007.05.039 ↗
13. Kimura · Science · 2008 · 320 · 105710.1126/science.1156084 ↗
14. Inoue · Metall. Mater. Trans. A · 2010 · 41 · 34110.1007/s11661-009-0093-x ↗
15. Kimura · ISIJ Inter. · 2010 · 50 · 15210.2355/isijinternational.50.152 ↗
16. Yoshida · Metall. Mater. Trans. A · 1998 · 29 · 27910.1007/s11661-998-0179-x ↗
17. Cerri · Metall. Mater. Trans. A · 1997 · 28 · 25710.1007/s11661-997-0128-0 ↗
18. Angers · Metall. Trans. A · 1987 · 18 · 55510.1007/BF02649472 ↗
19. Song · Mater. Sci. Eng. A · 2006 · 441 · 110.1016/j.msea.2006.08.095 ↗
20. Garrison · J. Phys. Chem. Solids · 1987 · 48 · 103510.1016/0022-3697(87)90118-1 ↗
21. Yagi · Tetsu-to-Hagane · 1995 · 81 · 22510.2355/tetsutohagane1955.81.3_225 ↗
22. Thompson · Scr. Metall. · 1984 · 18 · 12710.1016/0036-9748(84)90489-7 ↗
23. Srinivasan · J. Mech. Phys. Solids · 2008 · 56 · 270710.1016/j.jmps.2008.02.006 ↗
24. Spitzig · Acta Metall. · 1970 · 18 · 61110.1016/0001-6160(70)90090-8 ↗
25. S. Nishijima, A. Ishii, K. Kanazawa, S. Matsuoka, C. Masuda, NRIM Fatigue Data Sheet Technical Document No. 5, National Research Institute for Metals, Tokyo, 1989.
26. Philip · 1990 · vol. 1