journal article·2022-01

An exceptional ductility of AZ31 magnesium alloy sheet achieved by consecutive multi-pass cooperative lowered-temperature rolling

Jingyuan Shen, Lingyu Zhang, Yu Sun, Lianxi Hu, Sen Yu, Aiwei Fang, Huan Yu

Publisher page

Abstract

Abstract In this study, a novel technique of consecutive multi-pass cooperative lowered-temperature rolling (CMCLR) was proposed for the first time, with the purpose of preparing high performance wrought magnesium alloys. Based on this, a highly ductile magnesium alloy sheet could be effectively produced from ingot. The corresponding microstructure could directly evolve from coarse dendrites to equiaxed grains with an average size of ∼5 μm, which was attributed to the intense dynamic recrystallization (DRX) during isothermal deformation. The equivalent strain gradually decreased from the surface to the interior and edge of the rolled sheet due to the anisotropic plastic deformation. Instead, the temperature of the core of the sheet was slightly higher than that of the surface due to the deformation heat effect. The basal texture in the RD-TD plane generally weakened in the form of the splitting of basal texture toward the RD and the broadening of basal plane away from the pole center due to texture randomization dominated by DRXed grains. The exceptional ductility of more than 28.7% together with acceptable ultimate tensile strength of not less than 267 MPa was ascribed to the progressive work hardening as a result of seamless switching of multiple deformation modes, i.e., basal dislocation-slip-mediated deformation was preferentially operated and then was substituted by twinning-controlled deformation and non-basal dislocation-slip-dominated deformation. The selection of { 10 1 ‾ 2 } twin variants agreed well with geometrical compatibility factor (m’) criterion instead of Schmid’s law. The activated twin variants nearly engulfed the whole parent grains for the sake of preserving compatible deformation continuity at ambient temperature, giving rise to the formation of TD-split texture. Comparatively, the { 10 1 ‾ 2 } twinning could randomize the basal texture via reorienting grain orientations which in turn facilitated the reactivation of dislocation slip systems in the case of high temperature deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Grain refinement and mechanical properties improvement of AZ31 Mg alloy sheet obtained by two-stage rolling10.1016/j.msea.2017.02.107 ↗
2. Tailoring the rolling texture of AZ31 Mg alloy with calcium and tin addition10.1002/adem.201800920 ↗
3. Microstructure and mechanical properties of Mg-6.75%Zn-0.57%Zr-0.4%Y-0.18%Gd sheets by unidirectional and cross rolling10.1016/j.msea.2016.03.101 ↗
4. Effect of hot rolling on microstructure and properties of the ZEK100 alloy10.1016/j.jma.2019.02.001 ↗
5. Towards strength-ductility synergy through a novel technique of multi-pass lowered-temperature drawing in AZ31 magnesium alloys10.1016/j.jallcom.2021.159604 ↗
6. Understanding the high temperature reversed yield asymmetry in a Mg-rare earth alloy by slip trace analysis10.1016/j.actamat.2017.12.021 ↗
7. Grain refining and mechanical properties of AZ31 alloy processed by accumulated extrusion bonding10.1016/j.jallcom.2018.02.248 ↗
8. Enhanced mechanical properties due to grain refinement and texture modification in an AZ61 Mg alloy processed by small strain impact forging10.1016/j.msea.2014.10.075 ↗
9. Enhanced ductility in high-strength fine-grained magnesium and magnesium alloy sheets processed via multi-pass rolling with lowered temperature10.1016/j.jallcom.2016.01.032 ↗
10. Simultaneously enhanced strength and ductility of Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained structures10.1016/j.scriptamat.2016.12.024 ↗
11. Enhanced ductility of a finegrained Mg-Gd-Al-Zn magnesium alloy by hot extrusion10.1002/adem.201701171 ↗
12. Homogeneity improvement of friction stir welded ZK61 alloy sheets in microstructure and mechanical properties by multi-pass lowered temperature rolling10.1016/j.msea.2017.07.044 ↗
13. Effect of grain size distribution and texture on the cold extrusion behavior and mechanical properties of AZ31 Mg alloy10.1016/j.msea.2011.01.020 ↗
14. Effect of cold pre-forging on the microstructure and mechanical properties of extruded Mg-8Sn-1Al-1Zn alloy10.1016/j.msea.2014.06.053 ↗
15. The role of bimodal-grained structure in strengthening tensile strength and decreasing yield asymmetry of Mg-Gd-Zn-Zr alloys10.1016/j.msea.2017.09.125 ↗
16. Effect of extrusion parameters on microstructure and mechanical properties of Mg-7.5Gd-2.5Y-3.5Zn-0.9Ca-0.4Zr (wt%) alloy10.1016/j.msea.2016.12.121 ↗
17. Forgeability, microstructure and mechanical properties of a free-forged Mg-8Gd-3Y-0.4Zr alloy10.1016/j.msea.2015.10.035 ↗
18. Effects of hot ring forging on microstructure, texture and mechanical properties of AZ31 magnesium alloy10.1016/j.msea.2016.10.024 ↗
19. Microstructure evolution and mechanical properties of Mg-Gd-Y-Ag-Zr alloy fabricated by multidirectional forging and ageing treatment10.1016/j.msea.2017.06.038 ↗
20. Microstructure, texture evolution and mechanical properties of multidirectional forged Mg-13Gd-4Y-2Zn-0.5Zr alloy under decreasing temperature10.1016/j.jallcom.2020.153776 ↗
21. Microstructure, texture evolution and yield strength symmetry improvement of as-extruded ZK60 Mg alloy via multi-directional impact forging
22. Microstructure and tensile properties of Mg-3Al-1Zn sheets produced by hot roller-cold-material rolling10.1016/j.msea.2017.09.018 ↗
23. Improved mechanical properties of AZ31 magnesium alloy sheets by repeated cold rolling and annealing using a small pass reduction10.1016/j.msea.2015.04.057 ↗
24. Effect of the final rolling speeds on the stretch formability of AZ31 alloy sheet rolled at a high temperature10.1016/j.jallcom.2015.08.005 ↗
25. Texture and stretch formability of AZ61 and AM60 magnesium alloy sheets processed by high-temperature rolling10.1016/j.jallcom.2015.01.148 ↗
26. Evolution of microstructure, texture and mechanical properties of ZK60 magnesium alloy in a single rolling pass10.1016/j.msea.2018.03.096 ↗
27. Interactive contraction nanotwins-stacking faults strengthening mechanism of Mg alloys10.1016/j.actamat.2019.02.040 ↗
28. Strong and ductile AZ31 Mg alloy with a layered bimodal structure10.1038/s41598-019-41987-4 ↗
29. Microstructure and mechanical properties of thin ZK61 magnesium alloy sheets by extrusion and multi-pass rolling with lowered temperature10.1016/j.jmatprotec.2016.06.005 ↗
30. Achieving ultra-high hardness of nanostructured Mg-8.2Gd-3.2Y-1.0Zn-0.4Zr alloy produced by a combination of high pressure torsion and ageing treatment10.1016/j.scriptamat.2018.06.009 ↗
31. Microstructure and mechanical properties of Mg-5Li-1Al sheets prepared by accumulative roll bonding10.1016/j.jmst.2017.02.005 ↗
32. Effect of differential speed rolling on microstructure and mechanical properties of an AZ91 magnesium alloy10.1016/j.jallcom.2007.06.050 ↗
33. The texture and its optimization in magnesium alloy10.1016/j.jmst.2019.10.010 ↗
34. Microstructure, texture and mechanical properties of Mg-6Sn alloy processed by differential speed rolling10.3390/ma14010083 ↗
35. Enhanced ductility and strength of Mg-1Zn-1Sn-0.3Y-0.2Ca alloy achieved by novel micro-texture design10.1016/j.scriptamat.2021.114119 ↗
36. Nucleation and preferential growth mechanism of recrystallization texture in high purity binary magnesium-rare earth alloys10.1016/j.actamat.2017.07.038 ↗
37. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
38. Influence of rolling temperature on microstructural evolution and mechanical behavior of AZ31 alloy with accumulative roll bonding10.1016/j.msea.2019.03.047 ↗
39. Compatibility of dependence on deformation in two-phase Ti-Al alloys: microstructure and orientation relationships10.1007/BF02670762 ↗
40. Basal slip mediated tension twin variant selection in magnesium WE43 alloy10.1016/j.actamat.2019.03.018 ↗
41. Geometrical compatibility factor analysis of paired extension twins in extruded Mg-3Al-1Zn alloys10.1016/j.matdes.2015.07.130 ↗
42. The role of strain accommodation during the variant selection of primary twins in magnesium10.1016/j.actamat.2010.12.005 ↗
43. Directional solidification of Mg-Al alloys and microsegregation study of Mg alloys AZ31 and AM50: Part II. comparison between AZ31 and AM5010.1007/s11661-009-9788-2 ↗
44. Re-precipitation mechanisms of the γ′ phase with sphere, near-sphere, cubic, octets and finally-dendrite in as-cast Ni-based superalloys10.1016/j.jallcom.2021.160104 ↗
45. Investigation on temperature change of cold magnesium alloy strips rolling process with heated roll10.1007/s11665-011-0091-1 ↗
46. Hot-compression constitutive relation of as-cast AZ31 magnesium alloy
47. Modelling of uniaxially pre-strained and annealed AZ31 magnesium sheet based on microstructural considerations10.1016/j.actamat.2016.04.001 ↗
48. Low-energy, mobile grain boundaries in magnesium10.1038/srep21393 ↗
49. Effect of subgrain and the associated DRX behaviour on the texture modification of Mg-6.63Zn-0.56Zr alloy during hot tensile deformation10.1016/j.msea.2021.141745 ↗
50. Texture evolution during static recrystallization of cold-rolled magnesium alloys10.1016/j.actamat.2015.12.045 ↗
51. Characteristics of coincident site lattice grain boundaries developed during equal channel angular pressing of magnesium single crystals10.1016/j.scriptamat.2010.11.011 ↗
52. Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion10.1016/j.actamat.2018.07.014 ↗
53. Dimples on nanocrystalline fracture surfaces as evidence for shear plane formation10.1126/science.1084284 ↗
54. Individual effect of recrystallisation nucleation sites on texture weakening in a magnesium alloy: Part 2- shear bands10.1016/j.actamat.2017.12.019 ↗
55. In situ neutron diffraction and polycrystal plasticity modeling of a Mg-Y-Nd-Zr alloy: effects of precipitation on individual deformation mechanisms10.1016/j.actamat.2013.03.010 ↗
56. Basal and non-basal dislocation slip in Mg-Y10.1016/j.msea.2013.03.006 ↗
57. The influence of stacking fault energy on the mechanical behavior of Cu and Cu-Al alloys: deformation twinning, work hardening, and dynamic recovery10.1007/s11661-001-0109-7 ↗