journal article·2022-09Open access

Processing, microstructure evolution and mechanical property improvements of an Al–V–Cr–Mn–Fe–Ni CCA with an as-cast BCC/B2 coherent nanostructure

Xiao Liu, Kenneth Vecchio

Abstract

This article reports a thermo-mechanical processing method that enables microstructure tailoring and mechanical property improvement in an Al–V–Cr–Mn–Fe–Ni complex concentrated alloy (CCA) with an as-cast microstructure consisting of coherent B2 precipitation in a BCC matrix. A large increment (45%) in tensile strength has been achieved after the non-uniform as-cast microstructure was changed to a uniform, recrystallized structure after processing. Microstructure evolution and the corresponding mechanical properties were also studied for this alloy. It was found by selecting the proper temperature at the final annealing step, significant improvements in ductility can be further achieved without compromising the high strength; the mechanical behavior of this alloy can be effectively tuned by varying the final annealing temperature. Furthermore, to validate efficacy and generalizability of the developed thermo-mechanical processing method on CCAs with the same type of microstructure, but in a different compositional space, the same method was applied to an Al–Cr–Fe–Co–Ni CCA composition found in the literature. Similar to our Al–V–Cr–Mn–Fe–Ni CCA, tensile test of the processed Al–Cr–Fe–Co–Ni CCA revealed vast improvement in tensile strength (over 200 MPa) without sacrificing any ductility.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · High Entropy Alloys Studies · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Three strategies for the design of advanced high-entropy alloys10.3390/e18070252 ↗
4. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
5. High-entropy alloys10.1038/s41578-019-0121-4 ↗
6. High entropy alloys as a bold step forward in alloy development10.1038/s41467-019-09700-1 ↗
7. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
8. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
9. High-entropy alloys with heterogeneous microstructure: processing and mechanical properties10.1016/j.pmatsci.2020.100709 ↗
10. Two-step heat treatment for laser powder bed fusion of a nickel-based superalloy with simultaneously enhanced tensile strength and ductility
11. Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2(Ni,Co,Fe,Cr)14 compositions10.1016/j.actamat.2018.01.050 ↗
12. Understanding on processing temperature-metallographic microstructure-tensile property relationships of third-generation nickel-based superalloy WZ-A3 prepared by hot isostatic pressing10.1016/j.jallcom.2022.164668 ↗
13. The Al effects of Co-Free and V-Containing High-Entropy alloys10.3390/met7010018 ↗
14. Novel Fe36Mn21Cr18Ni15Al10high entropy alloy with bcc/B2 dual-phase structure10.1016/j.jallcom.2017.02.211 ↗
15. Structure and high temperature mechanical properties of novel non-equiatomic Fe-(Co, Mn)-Cr-Ni-Al-(Ti) high entropy alloys10.1016/j.intermet.2018.09.010 ↗
16. The microstructure and mechanical properties of novel Al-Cr-Fe-Mn-Ni high-entropy alloys with trimodal distributions of coherent B2 precipitates10.1016/j.msea.2019.04.104 ↗
17. Compositional variation effects on the microstructure and properties of a refractory high-entropy superalloy AlMo0.5NbTa0.5TiZr10.1016/j.matdes.2017.11.033 ↗
18. Precipitation hardening of superalloys by ordered γ′-particles10.1016/0079-6425(85)90001-5 ↗
19. The effect of phase chemistry on the extent of strengthening mechanisms in model Ni-Cr-Al-Ti-Mo based superalloys10.1016/j.actamat.2018.04.064 ↗
20. Physical metallurgy of high-entropy alloys
21. Cold-workable refractory complex concentrated alloys with tunable microstructure and good room-temperature tensile behavior10.1016/j.scriptamat.2020.07.006 ↗
22. High temperature strength of refractory complex concentrated alloys10.1016/j.actamat.2019.06.032 ↗
23. Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals10.1016/j.mattod.2017.02.003 ↗
24. Design of non-equiatomic high entropy alloys with heterogeneous lamella structure towards strength-ductility synergy10.1016/j.scriptamat.2018.05.020 ↗
25. Anomalous precipitate-size-dependent ductility in multicomponent high-entropy alloys with dense nanoscale precipitates10.1016/j.actamat.2021.117480 ↗
26. Realizing strength-ductility combination of coarse-grained Al0.2Co1.5CrFeNi1.5Ti0.3 alloy via nano-sized, coherent precipitates10.1016/j.ijplas.2017.10.005 ↗
27. Effect of Mn and v on structure and mechanical properties of high-entropy alloys based on CoCrFeNi system10.1016/j.jallcom.2013.12.210 ↗
28. Effect of v content on microstructure and mechanical properties of the CoCrFeMnNiVx high entropy alloys10.1016/j.jallcom.2014.12.157 ↗
29. Criterion for sigma phase formation in Cr- and V-Containing high-entropy alloys10.1080/21663831.2013.831382 ↗
30. Evading the strength-ductility trade-off dilemma in steel through gradient hierarchical nanotwins10.1038/ncomms4580 ↗
31. Extraordinary strength-ductility synergy in a heterogeneous-structured β -Ti alloy through microstructural optimization10.1080/21663831.2019.1652856 ↗
32. Tejedor · 2013
33. On the development concept for a new 718-type superalloy with improved temperature capability10.3390/met9101130 ↗
34. Deformation behaviour of an as-cast nickel base superalloy during primary hot working above and below the gamma prime solvus10.1016/j.msea.2019.03.083 ↗
35. On the evolution of primary gamma prime precipitates during high temperature and high strain rate deformation and subsequent heat treatment in the Ni-based superalloy, RR100010.1007/s11661-019-05330-w ↗
36. The influence of cooling rate from temperatures above the γ′ solvus on morphology, mismatch and hardness in advanced polycrystalline nickel-base superalloys10.1016/j.msea.2007.04.098 ↗
37. L12-Strengthened cobalt-base superalloys10.1146/annurev-matsci-070214-021043 ↗
38. Effects of alloying additions on the microstructure, lattice misfit, and solvus temperature of a novel Co–Ni-based superalloy10.1016/j.intermet.2021.107431 ↗
39. Interactions between lattice dislocations and grain boundaries in L12 ordered compounds investigated by in situ transmission electron microscopy and computer modelling experiments10.1016/0921-5093(93)90704-I ↗
40. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures10.1016/j.actamat.2014.08.026 ↗