Microstructure and mechanical-property evolution of the explosive welding joint from the same RAFM steels under explosive welding and post-weld heat treatment
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Microstructure and mechanical properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Synergistic strengthening of high-Cr martensitic heat-resistant steel and application of thermo-mechanical treatments
2. Influence of Ti addition on MX precipitation and creep-fatigue properties of RAFM steel for nuclear fusion reactor10.1016/j.jnucmat.2022.154001 ↗
3. The kinetics of dynamic recrystallization and construction of constitutive modeling of RAFM steel in the hot deformation process10.1016/j.jnucmat.2021.153285 ↗
4. Developing of containing Ta, Zr reduced activation ferritic/martensitic (RAFM) steel with excellent creep property10.1016/j.msea.2022.143625 ↗
5. Effect of post bonding heat treatment on the local strain evolution of transient liquid phase bonded RAFM steel10.1016/j.msea.2022.143008 ↗
6. In-Situ synchrotron investigation of elastic and tensile properties of oxide dispersion strengthened EUROFER97 steel for advanced fusion reactors10.1016/j.actamat.2024.119876 ↗
7. Micromechanical behavior of a fine-grained China low activation martensitic (CLAM) steel10.1016/j.jmst.2019.05.005 ↗
8. Effect of welding techniques on the microstructure and mechanical properties of reduced activation ferritic-martensitic (RAFM) steel weld joints10.1016/j.fusengdes.2019.111289 ↗
9. Effect of thermal ageing on tensile and creep properties of JLF-1 and CLAM steels
10. The correlation among microstructural parameter and dynamic strain aging (DSA) in influencing the mechanical properties of a reduced activated ferritic-martensitic (RAFM) steel10.1016/j.msea.2018.10.023 ↗
11. Effect of post-weld heat treatment on the mechanical properties of electron beam welded joints for CLAM steel10.1016/j.jnucmat.2013.07.041 ↗
12. Microstructure and mechanical properties of the TIG welded joints of fusion CLAM steel10.1016/j.fusengdes.2010.06.019 ↗
13. Effect of microstructures to tensile and impact properties of stir zone on 9%Cr reduced activation ferritic/martensitic steel friction stir welds10.1016/j.msea.2018.05.043 ↗
14. Analysis of residual stress and hardness of T-joint on China low activation martensitic steel laser weld
15. Overview on the welding technologies of CLAM steel and the DFLL TBM fabrication10.1016/j.nme.2016.03.003 ↗
16. Microstructural evolution of dissimilar welded joints between reduced-activation ferritic-martensitic steel and 316L stainless steel during the post weld heat treatment10.1016/j.msea.2018.03.035 ↗
17. Experimental investigation on microstructure and mechanical properties of activated TIG welded reduced activation ferritic/martensitic steel joints10.1016/j.jmapro.2016.11.007 ↗
18. Role of evolving microstructure on the mechanical properties of electron beam welded ferritic-martensitic steel in the as-welded and post weld heat-treated states10.1016/j.msea.2017.05.036 ↗
19. Delta ferrite in the weld metal of reduced activation ferritic martensitic steel10.1016/j.jnucmat.2014.07.008 ↗
20. Ambient, elevated temperature tensile properties and origin of strengthening in friction stir welded 6 mm thick reduced activation ferritic-martensitic steel plates in as-welded and post-weld normalised conditions10.1016/j.msea.2022.144019 ↗
21. Morphology and structure of various phases at the bonding interface of Al/steel formed by explosive welding10.1093/oxfordjournals.jmicro.a023791 ↗
22. The effect of explosive welding parameters on metallurgical and mechanical interfacial features of Inconel 625/plain carbon steel bimetal plate10.1016/j.msea.2012.07.012 ↗
23. Underwater explosive welding of tungsten to reduced-activation ferritic steel F82H10.1016/j.fusengdes.2013.12.038 ↗
24. Understanding of interfacial transient behaviors during explosive welding of Cu/Fe: wave shapes, grain structures, and mechanisms
25. Microstructure and mechanical property of bonding zones between Ta foil and steel plate fabricated by explosive welding10.1016/S1003-6326(23)66269-7 ↗
26. Numerical and experimental studies of the mechanism of the wavy interface formations in explosive/impact welding10.1016/j.jmps.2005.06.001 ↗
27. Experimental and numerical investigation of microstructure and mechanical behavior of titanium/steel interfaces prepared by explosive welding10.1016/j.msea.2017.02.075 ↗
28. A two steps Lagrangian–Eulerian numerical model for the simulation of explosive welding of three dissimilar materials joints10.1016/j.cirpj.2021.08.010 ↗
29. Towards better understanding of explosive welding by combination of numerical simulation and experimental study10.1016/j.matdes.2019.107649 ↗
30. Experimental and numerical investigation on interface microstructure and phase constitution of radiation resistant Pb/316L stainless steel explosive welded composite plate10.1016/j.jmrt.2023.03.141 ↗
31. Microstructural evolution and interfacial properties of explosively welded Nb/steel composite plate during post-heat treatment10.1016/j.jmrt.2023.07.161 ↗
32. Effects of heat treatment on microstructure and mechanical properties of explosive welded 10CrNi3MoV steel – 304L stainless steel
33. Numerical simulations of target hole diameters for hypervelocity impacts into elevated and room temperature bumpers10.1016/j.ijimpeng.2006.09.086 ↗
34. A review on Johnson Cook material model
35. Dynamic behaviors of multi-layered steel targets with air gaps subjected to the impact of EFP simulants10.1260/2041-4196.6.1.65 ↗
36. Large-scale 3D random polycrystals for the finite element method: generation, meshing and remeshing10.1016/j.cma.2011.01.002 ↗
37. Crystallographic texture evolution in bulk deformation processing of FCC metals10.1016/0022-5096(92)80003-9 ↗
38. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
39. Grain-boundary sliding and separation in polycrystalline metals: application to nanocrystalline fcc metals10.1016/j.jmps.2004.04.006 ↗
40. Grain rotations during uniaxial deformation of gradient nano-grained metals using crystal plasticity finite element simulations10.1016/j.eml.2017.09.003 ↗
41. Dynamic strain ageing, deformation, and fracture behavior of modified 9Cr-1Mo steel10.1016/j.msea.2014.10.011 ↗
42. Mechanism-based strain gradient plasticity— I. Theory
43. Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues10.1016/S1359-6462(02)00335-4 ↗
44. Tensile properties of F82H steel after aging at 400-650 °C for 100,000 h10.1016/j.fusengdes.2015.06.190 ↗
45. Development of Zr-containing advanced reduced-activation alloy (ARAA) as structural material for fusion reactors10.1016/j.fusengdes.2016.02.032 ↗