journal article·2013-08-23Open access

Preparation of PMMA/hBN composite coatings for metal surface protection

T. Coan, G. S. Barroso, G. Motz, A. Bolzán, R. A. F. Machado

Materials Research· Volume 16· Issue 6

Abstract

Polyacrylics have been widely used in coatings. However, their application is limited by low corrosion resistance. One way to enhance their properties is the addition of fillers with adequate properties. In this study, composite materials of PMMA and hBN were developed and deposited on steel by dip-coating. The influence of the amount of hBN in the PMMA coating regarding corrosion resistance was investigated. The surface and cross-section of the coatings were characterized by SEM, the porosity was investigated by systematic manual point count and the adhesion was classified according to the tape test standard. The produced coatings were submersed in NaCl and HCl solutions to analyze corrosion resistance. The results showed that the PMMA/hBN composite coatings improved the corrosion resistance in comparison with pure PMMA. Additionally, the coatings are crack free and well bonded to the metallic substrate.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Tribology and Wear Analysis · Polymer Nanocomposite Synthesis and Irradiation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Federal University of Santa Catarina, Brazil

University of Bayreuth, Germany

References (32)

Show source-provided references
1. Preparation and characterization of polysiloxane - polyacrylates composite latices and their film properties10.1002/pi.1759 ↗
2. Preparation of composite polyacrylate latex particles with in situ-formed methylsilsesquioxane cores10.1002/pat.1371 ↗
3. Anticorrosively Enhanced PMMA-Clay Nanocomposite Materials with Quaternary Alkylphosphonium Salt as an Intercalating Agent10.1021/cm010337f ↗
4. Hybrid PMMA-silica anticorrosive coatings for stainless steel 316L10.1179/1743278211Y.0000000035 ↗
5. Advanced coatings on the basis of Si(C)N precursors for protection of steel against oxidation10.1016/j.jeurceramsoc.2008.11.013 ↗
6. High performance environmental barrier coatings, Part I: Passive filler loaded SiCN system for steel10.1016/j.jeurceramsoc.2011.05.027 ↗
7. Fabrication of superhydrophobic binary nanoparticles/PMMA composite coating with reversible switching of adhesion and anticorrosive property10.1016/j.apsusc.2011.02.136 ↗
8. Particle-Filled PHPS Silazane-Based Coatings on Steel10.1111/j.1744-7402.2008.02346.x ↗
9. Carbothermal synthesis of boron nitride coating on PAN carbon fiber10.1016/j.jeurceramsoc.2008.12.004 ↗
10. Preparation, properties and applications of boron nitride thin films10.1016/0040-6090(88)90008-9 ↗
11. Relative stability of cubic and different hexagonal forms of boron nitride10.1016/S0022-3697(00)00254-7 ↗
12. Surface functionalization for dispersing and stabilizing hexagonal boron nitride nanoparticle by bead milling10.1016/j.colsurfa.2011.08.007 ↗
13. Diffusion Barriers
14. Impact of X-ray irradiation on PMMA thin films10.1016/j.apsusc.2012.07.146 ↗
15. The influence of process parameters on the degradation of thermally sprayed polymer coatings10.1016/S0257-8972(97)00269-7 ↗
17. Thick Films of Viscous Fluid Coating a Plate Withdrawn from a Liquid Reservoir
18. Dragging of a liquid by a moving plate
19. Boron nitride nanotubes/polystyrene composites10.1557/jmr.2006.0340 ↗
20. Mechanical and Thermal Properties of Polymethyl Methacrylate-BN Nanotube Composites10.1155/2008/642036 ↗
21. Improved mechanical properties of polymer nanocomposites incorporating graphene-like BN: Dependence on the number of BN layers10.1016/j.scriptamat.2010.12.007 ↗
22. Polymer/Boron nitride nanocomposite materials for superior termal transport performance
23. Preparation and thermal properties of polyacrylonitrile/hexagonal boron nitride composites10.1016/j.tca.2012.11.011 ↗
24. 2002
25. 2002
26. 2008
27. Preparation and characterization of plasma sprayed Ni3Al - hBN composite coating10.1016/j.surfcoat.2010.09.036 ↗
28. Riedel W · 1991
29. Comparative studies of the properties of poly(methyl methacrylate) - clay nanocomposite materials prepared by in situ emulsion polymerization and solution dispersion10.1002/app.21095 ↗
30. Effect of clay on the corrosion protection efficiency of PMMA/Na+-MMT clay nanocomposite coatings evaluated by electrochemical measurements10.1016/j.eurpolymj.2007.10.011 ↗
31. Jones DA · 1996
32. Duplex Al-based thermal spray coatings for corrosion protection in high temperature refinery applications10.1590/S1516-14392004000100025 ↗