Influence of Temperature on Mechanical Properties, Fracture Morphology and Strain Hardening Behavior of a 304 Stainless Steel
Source abstract
Abstract
The strain hardening behavior of an AISI 304 stainless steel at different temperatures was investigated in this work. Specimens were tensile tested up to rupture at temperatures of 25, 50, 75, 100, 125 and 150 ºC by using a universal testing machine with an attached environmental test chamber. The induction of martensite by strain was assessed by X-ray diffraction and Rietveld refinement. The resultant fracture morphologies were analyzed by scanning electron microscopy. The changes in the mechanical properties as a function of temperature were evaluated through the variations in the stress-strain curve and the strain hardening behavior was described in terms of strain hardening rate, instantaneous strain hardening exponent and Crussard-Jaoul analysis. Six strain hardening stages were detected at lower temperatures, transitioning into three strain hardening stages at higher temperatures. Fracture surface was ductile at all studied temperatures, although differences in terms of dimple and void morphology were observed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Federal de Minas Gerais, Brazil
References (35)
Show source-provided references
1. Experimental study on the martensitic transformation in AISI 304 steel sheets subjected to tension under wide ranges of strain rate at room temperature10.1016/j.msea.2011.04.030 ↗
2. Talonen J · 52
3. The influence of copper addition on the formability of AISI304 stainless steel10.1016/S0921-5093(02)00362-3 ↗
4. Talonen J · 2007
5. The effect of cold work on structure and properties of AISI 304 stainless steel10.1016/j.jmatprotec.2007.09.080 ↗
6. Effects of temperature and strain rate on the tensile properties of twip steels10.1590/S1517-70762010000200011 ↗
7. Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels10.1016/j.actamat.2007.07.015 ↗
8. Martensite formation, strain rate sensitivity, and deformation behavior of type 304 stainless steel sheet10.1007/BF02647406 ↗
9. Strain induced martensite formation and its effect on strain hardening behavior in the cold drawn 304 austenitic stainless steels10.1016/S1359-6462(96)00338-7 ↗
10. Internal Friction on AISI 304 Stainless Steels with Low Tensile Deformations at Temperatures between -50 and 20ºC
11. 2014
12. 2007
13. Applicability of modified Crussard-Jaoul analysis on the deformation behaviour of dual-phase steels10.1007/BF01729860 ↗
14. Microstructural evolution and strain hardening behavior during plastic deformation of Fe-12Mn-8Al-0.8C steel
15. Strain hardening behavior of a Fe-18Mn-0.6C-1.5Al TWIP steel10.1016/j.msea.2009.08.028 ↗
16. The effects of SI on the mechanical twinning and strain hardening of Fe-18Mn-0.6C twinning-induced plasticity steel10.1016/j.actamat.2013.02.031 ↗
17. Effect of tempering temperature on resistance to deformation behavior for low carbon bainitic YP960 steels10.1016/j.msea.2014.09.054 ↗
18. Strain Hardening Behavior of High Performance FBDP, TRIP and TWIP Steels10.1002/srin.201000132 ↗
19. R factors in Rietveld analysis: How good is good enough?10.1154/1.2179804 ↗
20. Rietveld refinement guidelines10.1107/S0021889898009856 ↗
21. Contributions of ε and α′ TRIP Effects to the Strength and Ductility of AISI 304 (X5CrNi18-10) Austenitic Stainless Steel10.1007/s11661-014-2726-y ↗
22. Deformation-induced phase transformation and strain hardening in type 304 austenitic stainless steel10.1007/s11661-006-0130-y ↗
23. Influence of Al on the temperature dependence of strain hardening behavior and glide planarity in Fe-Cr-Ni-Mn-C austenitic stainless steels10.1016/j.msea.2015.10.005 ↗
24. Multiaxial low-cycle fatigue failure mechanism of super-elastic NiTi shape memory alloy micro-tubes10.1016/j.msea.2016.04.019 ↗
25. Liu AF · 2005 · 4710.31399/asm.tb.mmfi.t69540047 ↗
26. Experimental investigation on martensitic transformation and fracture morphologies of austenitic stainless steel10.1016/j.ijplas.2009.03.003 ↗
27. Fracture Morphologies of Advanced High Strength Steel During Deformation10.1007/s40195-014-0032-8 ↗
28. Influence of strain rate on tensile characteristics of SUS304 metastable austenitic stainless steel10.1007/s40195-013-0206-9 ↗
29. Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding10.1016/j.optlaseng.2009.08.009 ↗
30. Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels10.1016/j.actamat.2004.05.003 ↗
31. Microstructure development during high-velocity deformation10.1007/s11661-004-0054-3 ↗
32. Stage-II tensile work hardening behaviour of type 316L(N) austenitic stainless steel10.1016/j.msea.2015.11.001 ↗
33. Kinetics of Uniaxial Tensile Flow and Work Hardening Behavior of Type 316L(N) Austenitic Stainless Steel in the Framework of Two-Internal-Variable Approach10.1007/s11661-014-2660-z ↗
34. Control of Strain Hardening Behavior in High-Mn Austenitic Steels10.1007/s40195-014-0084-9 ↗
35. The influence of temperatures and strain rates on the mechanical behavior of dual phase steel in different conditions10.1016/j.jmrt.2014.11.001 ↗