Cement mixtures containing copper tailings as an additive: durability properties
Source abstract
Abstract
The effects of copper tailings as an additive, on some durability properties of cement mixtures were investigated. In each mixture, copper tailings addition levels by mass were 0%, 5% and 10%. Compared to the control samples, copper tailings blended pastes showed superior performance against autoclave expansion while insignificant decreases in sulfate resistance of mortars were observed. Copper tailings increased the water absorption and total permeable voids of concretes slightly. However, the compressive and flexural strengths of blended concretes were higher than those of the control samples. Similarly, improved resistance to acid attack and chloride penetration as the copper tailings content of concretes increased were also observed. Results further showed that the ASTM C 1202 rapid chloride permeability test may not be a valid indicator of chloride migration in mixtures containing conductive copper tailings. These results suggest that copper tailings can potentially enhance the durability properties of cement based materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Eastern Mediterranean University, Turkey
References (36)
Show source-provided references
1. High fly ash structural concrete
2. Characterisation of chloride transport and reinforcement corrosion in concrete under cyclic wetting and drying by electrical resistivity10.1016/S0958-9465(01)00074-9 ↗
3. Effect of admixtures in concrete on the corrosion resistance of steel reinforced concrete10.1016/S0010-938X(99)00134-1 ↗
4. Evaluation of bagasse ash as supplementary cementitious material10.1016/j.cemconcomp.2007.03.001 ↗
5. Ultrafine grinding of sugar cane bagasse ash for application as pozzolanic admixture in concrete10.1016/j.cemconres.2008.11.005 ↗
6. Utilization of bagasse ash as a pozzolanic material in concrete10.1016/j.conbuildmat.2009.06.030 ↗
7. 2009 · 28
8. Rheology and the resource industries10.1016/j.ces.2009.03.007 ↗
9. Preparation of autoclaved aerated concrete using copper tailings and blast furnace slag10.1016/j.conbuildmat.2011.08.034 ↗
10. Ayano T · 2000 · 141
11. Copper slag waste as a supplementary cementing material to concrete10.1007/s10853-006-0997-4 ↗
12. Performance of high strength concrete made with copper slag as a fine aggregate10.1016/j.conbuildmat.2008.12.013 ↗
13. Durability of copper slag contained concrete exposed to sulfate attack10.1016/j.conbuildmat.2010.11.067 ↗
14. 2006
15. 2010
16. 2009
17. 2007
18. 2009
19. 2006
20. 2009
21. 2008
22. 2010
23. Evaluation of AgNO3 solution spray method for measurement of chloride penetration into hardened cementitious matrix materials
24. Expansion of Cement Containing Crystalline Magnesia With and Without Fly Ash and Slag10.1520/CCA10452J ↗
25. Microstructure and durability of mortars modified with medium active blast furnace slag10.1016/j.conbuildmat.2010.06.077 ↗
26. Moura W · 1999 · 81
27. 2009
28. Sulfate Attack of Mortars Containing Recycled Fine Aggregates
29. Resistance of Scoria-Based Blended Cement Concrete against Deterioration and Corrosion in Mixed Sulfate Environment10.1061/(ASCE)0899-1561(2009)21:7(299) ↗
30. Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar10.1016/j.cemconres.2003.11.021 ↗
31. Effect of Supplementary Cementing Materials on the Specific Conductivity of Pore Solution and its Implications on the Rapid Chloride Permeability Test (AASHTO T277 and ASTM C1202) Results
32. Evaluation of Rapid Chloride Permeability Test (RCPT) Results for Concrete Containing Mineral Admixtures
33. Effect of mixing proportions of concrete on its electrical conductivity and the rapid chloride permeability test (ASTM C1202 or ASSHTO T277) results10.1016/j.cemconres.2003.09.007 ↗
34. High-Carbon Fly Ash in Manufacturing Conductive CLSM and Concrete10.1061/(ASCE)0899-1561(2006)18:6(743) ↗
35. Field indicator of chloride penetration depth10.1016/S0008-8846(03)00012-7 ↗
36. Evaluation of water absorption of concrete as a measure for resistance against carbonation and chloride migration10.1007/BF02483288 ↗