Mg-based Nanocomposites for Hydrogen Storage Containing Ti-Cr-V Alloys as Additives
Source abstract
Abstract
In this study, we have investigated the synthesis, microstructure and hydrogen storage properties of Mg-based nanocomposites containing different concentrations of TiCrV and TiCr1.2V0.8 alloys. The Mg-based nanocomposites of Mg containing Ti-Cr-V additives were prepared by reactive milling (RM) under hydrogen atmosphere. The structural characterization revealed the presence of the β-MgH2, γ-MgH2 and BCC phases in the powders samples after RM. In addition, a very refined and homogenous microstructure with average MgH2 crystallite size of around 10-12 nm was observed, including a nanometric dispersion of the additives in the magnesium hydride matrix. The doping with TiCrV and TiCr1,2V0,8 greatly improves the hydrogen desorption behavior of Mg in comparison with the sample without additive, resulting in the lowest onset temperature (240 ºC) for the sample containing 5%mol. of TiCrV. Very fast absorption and desorption kinetics at 275 ºC and 300 ºC (7 minutes and 5 minutes for full desorption and absorption, respectively) were observed in the samples containing TiCrV and TiCr1,2V0,8 without any notable difference between the type of additive used in comparison with the pure sample. However, a slight reduction in hydrogen capacity is observed in the mixtures than for the pure sample (6.7 wt.% against 7.3 wt.%).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen Storage and Materials · Hybrid Renewable Energy Systems · Ammonia Synthesis and Nitrogen Reduction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidade Estadual de Campinas, Brazil
Universidade Federal de São Carlos, Brazil
Université du Québec à Trois-Rivières, Canada
References (26)
Show source-provided references
1. Hydrogen storage: Materials, methods and perspectives10.1016/j.rser.2015.05.011 ↗
2. Tuning kinetics and thermodynamics of hydrogen storage in light metal element based systems - A review of recent progress10.1016/j.jallcom.2015.10.090 ↗
3. Structural characterization and dehydrogenation behavior of Mg-5 at.%Nb nano-composite processed by reactive milling10.1016/j.jallcom.2004.01.021 ↗
4. MgH2-based nanocomposites prepared by short-time high energy ball milling followed by cold rolling: A new processing route10.1016/j.ijhydene.2013.12.209 ↗
5. Effect of ball-milling duration and dehydrogenation on the morphology, microstructure and catalyst dispersion in Ni-catalyzed MgH2 hydrogen storage materials10.1016/j.actamat.2014.11.047 ↗
6. SEM and TEM characterization of magnesium hydride catalyzed with Ni nano-particle or Nb2O510.1016/j.jallcom.2006.10.128 ↗
7. Catalytic effect of transition metals on hydrogen sorption in nanocrystalline ball milled MgH2 - Tm (Tm=Ti, V, Mn, Fe and Ni) systems10.1016/S0925-8388(99)00442-9 ↗
8. Improvement in H-sorption kinetics of MgH2 powders by using Fe nanoparticles generated by reactive FeF3 addition10.1016/j.scriptamat.2004.12.020 ↗
9. Alloying effects of transition metals on chemical bonding in magnesium hydride MgH210.1016/j.actamat.2003.09.037 ↗
10. Mechanical alloying and electronic simulations of (MgH2+M) systems (M=Al, Ti, Fe, Ni, Cu and Nb) for hydrogen storage10.1016/S0360-3199(03)00045-4 ↗
11. H2 Absorbing-desorbing characterization of the Ti-V-Fe alloy system10.1016/0925-8388(95)01862-X ↗
12. The relation between microstructure and hydrogen absorbing property in Laves phase-solid solution multiphase alloys10.1016/0925-8388(95)01863-8 ↗
13. Hydrogen absorption by Laves phase related BCC solid solution10.1016/S0966-9795(97)00088-5 ↗
14. The influence of microstructure on hydrogen absorption properties of Ti-Cr-V alloys10.1016/S0925-8388(01)01530-4 ↗
15. Symmetry and hyperfine magnetic fields in Nd-based intermetallics10.1016/S0966-9795(00)00099-6 ↗
16. Effect of Al on hydrogen storage properties of V30Ti35Cr25Fe10 alloy10.1016/j.jallcom.2005.12.122 ↗
17. Phase structures and electrochemical properties of V2.1TiNi0.4Zrx (x=0-0.06) hydrogen storage electrode alloys10.1016/S1872-1508(06)60018-1 ↗
18. Hydrogen absorption/desorption properties in the TiCrV based alloys10.1590/S1516-14392012005000093 ↗
19. Synthesis process of Mg-Ti BCC alloys by means of ball milling10.1016/j.jallcom.2009.06.140 ↗
20. Cyclic hydrogen absorption-desorption characteristics of TiCrV and Ti0.8Cr1.2V alloys10.1016/j.ijhydene.2007.07.057 ↗
21. Particle size effects on the desorption properties of nanostructured magnesium dihydride (MgH2) synthesized by controlled reactive mechanical milling (CRMM)10.1016/j.jallcom.2005.12.087 ↗
22. Hydrogen desorption behavior from magnesium hydrides synthesized by reactive mechanical alloying10.1016/S0925-8388(00)01460-2 ↗
23. Improvement of hydrogen storage properties of TiCrV alloy by Zr substitution for Ti10.1016/j.ijhydene.2009.06.065 ↗
24. Thermal stabilization and hydrogen storage properties of Mg-40 wt% Ti0.28Cr0.50V0.22 composite prepared by mechanical milling10.1016/j.ijhydene.2006.08.030 ↗
25. Mechanical and reactive milling of a TiCrV BCC solid solution10.4028/www.scientific.net/JMNM.20-21.291 ↗
26. Catalytic effect of additives on the hydrogen absorption properties of nano-crystalline MgH2(X) - composites10.1016/S0925-8388(03)00145-2 ↗