journal article·2026-06-12Open access

Experimental study of polymeric cable insulation under DC-superimposed long temporary overvoltage and lightning impulse voltage stress

Robert Gerlach, Till Scholz, Willem Leterme, Bastian Soppe, Tanumay Karmokar, Isabella Nett, Dominik Häring

Materials Research Express· Volume 13· Issue 11

Abstract

Abstract Fault events in high-voltage direct current (DC) cable systems can generate DC-superimposed long temporary overvoltages (DC-LTOVs), same-polarity impulses that create stress conditions different from those in conventional superimposed lightning impulse (DC-LI) testing. The impact of such overvoltages on dielectric withstand strength and erosion processes in cable insulation under combined electrical and thermal stress conditions remains insufficiently understood, as previous research predominantly uses simplified specimens that lack cylindrical geometries or waveform-dependent erosion analysis. This work presents an experimental investigation on electro-thermally conditioned cross-linked polyethylene model cables subjected to DC bias with superimposed same-polarity impulses, evaluating withstand strength, breakdown time, and post-breakdown tree morphology across different waveforms and polarities. Within the investigated dataset, comparable withstand levels are obtained for DC-LTOV and DC-LI, while a pronounced polarity dependence of tree morphology is observed and a reduction of effective DC withstand is indicated when impulses are present. The findings suggest that waveform and polarity govern the observed erosion-dominated breakdown behavior, whereas the influence of impulse duration on withstand strength appears limited within the investigated parameter range and sample size. The study underscores the necessity for further investigation of space-charge dynamics and electrical-treeing phenomena in cable insulation, supported by increased statistical repetition.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High voltage insulation and dielectric phenomena · Lightning and Electromagnetic Phenomena · Power Transformer Diagnostics and Insulation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

IAEW at RWTH Aachen University

TenneT TSO GmbH

Südkabel GmbH

References (61)

Show source-provided references
1. Multi-terminal VSC HVDC for the European supergrid: obstacles10.1016/j.rser.2010.07.068 ↗
2. Overvoltages experienced by DC cables within an HVDC transmission system in a bipolar configuration
3. Cable surge arrester operation due to transient overvoltages under DC-side faults in the MMC–HVDC link10.1109/TPWRD.2015.2477493 ↗
4. Experimental investigation of the effect of transient overvoltages on XLPE-insulated HVDC cables10.1109/TDEI.2023.3264959 ↗
5. Mazzanti · 2013
6. Analysis of cable overvoltages in symmetrical monopolar and rigid bipolar HVDC configuration10.1109/TPWRD.2019.2960851 ↗
7. TB-852: recommendations for testing DC extruded cable systems for power transmission at a rated voltage up to and including 800 kV
8. HVDC cable system testing10.1049/hve2.70121 ↗
9. Surge and extended overvoltage testing of HVDC cable systems
10. Bartnikas · 1983
11. Dielectric strength of XLPE plate samples under transient overvoltages based on CIGRE TB 852
12. Feasibility of MVAC cable systems for MVDC/HVDC
13. Dissado · 2008
14. Electrical tree initiation in XLPE cable insulation by application of DC and impulse voltage10.1109/TDEI.2013.6633699 ↗
15. DC treeing breakdown associated with space charge formation in polyethylene10.1109/TEI.1977.298002 ↗
16. Space charge behaviors in cable insulation under a direct current–superimposed pulsed electric field10.1049/hve2.12032 ↗
17. DC and impulse treeing characteristics in insulating material for HVDC cable
18. DC cable systems with extruded dielectrics
19. Space charge dynamics in double-layered insulation cable under polarity reversal voltage10.1109/TDEI.2019.008457 ↗
20. Eignung von Polyethylen für Gleichspannungs-Enegiekabel
21. Kanaleinsatz an polyethylen-isolierungen bei belastung mit Stoßspannung
22. Durchschlagsverhalten von Kunststoffisolierungen bei Überlagerung von Gleich- und Stoßspannung
23. Impulsive strength of power cables with different XLPE compounds
24. Experimental approach to test the dielectric strength of polymeric cable insulation for dynamic dc voltage stresses
25. IEC 60243-3: electric strength of insulating materials - test methods - part 3: additional requirements for 1,2/50 μs impulse test
26. Transient over voltage testing of cable systems in MMC-HVDC links: a concept study including verification
27. Space charge and electric field dependent on polarity reversal of HVDC cable insulation10.1109/TDEI.2023.3335189 ↗
28. Temperature dependence of AC/DC breakdown strength of HVDC XLPE cable slices
29. Experimental investigation of polymer cable insulation dielectric strength under damped oscillation transient voltage (DOTV) and DC overvoltage stress
30. Space charge measurement of full-size 23-mm-thick XLPE cables in load cycle condition
31. IEC 60243-1: electric strength of insulating materials - test methods - part 1: test at power frequencies
32. IEC 62895: high voltage direct current (HVDC) power transmission - cables with extruded insulation and their accessories for rated voltages up to 320 kV for land applications - test methods and requirements
33. IEC 60230: impulse tests on cables and their accessories
34. Imaging and analysis techniques for electrical trees using x-ray computed tomography10.1109/TDEI.2013.003911 ↗
35. Electrical tree initiation properties in cross-linked polyethylene under DC-impulse composite voltages10.1109/ACCESS.2018.2877039 ↗
36. New theory of electrical discharge and breakdown in low-mobility condensed insulators10.1063/1.333133 ↗
37. Untersuchung des Raumladungseinflusses und der Schädigungsmechanismen beim Initialaufbruch von Polyethylen
38. Electron emission from metals as a function of temperature10.1103/PhysRev.23.153 ↗
39. On pre-breakdown phenomena in insulators and electronic semi-conductors10.1103/PhysRev.54.647 ↗
40. Effect of temperature on space charge trapping and conduction in cross-linked polyethylene10.1109/TDEI.2014.004261 ↗
41. Electrical tree growth characteristics in XLPE cable insulation under DC voltage conditions10.1109/TDEI.2015.005222 ↗
42. Tree initiation in polyethylene by application of DC and impulse voltage10.1109/TEI.1977.298003 ↗
43. Electrical tree and partial discharge characteristics in silicone rubber under lightning impulse superimposed DC voltage10.1109/TDEI.2025.3586194 ↗
44. Electrical treeing caused by rapid dc-voltage grounding of XLPE cable insulation
45. Space charge characteristics at the XLPE/EPDM interface under DC voltage superimposed by a repetitive impulse voltage10.1109/TDEI.2023.3271284 ↗
46. Study on space charge characteristics in XLPE under DC voltage superimposed by impulse voltage10.1109/TDEI.2022.3222123 ↗
47. Impact of DC polarity on electrical treeing in LDPE
48. Electrical tree degradation in high–voltage cable insulation: progress and challenges10.1049/hve.2020.0009 ↗
49. Electric field distribution characteristics and space charge motion process in transformer oil under impulse voltage10.1109/ACCESS.2019.2931492 ↗
50. Space charge dynamics under DC superimposed impulse voltages in XLPE10.1088/1361-6463/add7e8 ↗
51. An investigation into the growth of electrical trees in XLPE cable insulation10.1109/TEI.1979.298215 ↗
52. Electrical treeing initiation and breakdown phenomenon in polypropylene under DC and pulse combined voltages10.1109/TDEI.2018.007454 ↗
53. Behind the scenes of the development of DC XLPE power cables
54. Borlink LE4201R: crosslinkable insulation compound
55. Electric field tailoring in HVDC cable joints utilizing electro-thermal simulation: effect of field grading materials
56. Thermal and mechanical properties of EPR and XLPE cable compounds10.1109/MEI.2006.1639026 ↗
57. Borlink LE0500: crosslinkable semiconductive compound
58. POWERSIL 440MH: high consistency silicone rubber (HCR/HTV)
59. Room temperature vulcanizing (RTV) silicones
60. POWERSIL 415 MH: high consistency silicone rubber (HCR/HTV)
61. Electrical conductivity of carbon black and carbon fibre filled silicone rubber composites10.1002/(SICI)1522-9505(19980801)258:1<11::AID-APMC11>3.0.CO;2-0 ↗