Role of indium in enhancing trace-level NO 2 gas-sensing performance of spray-pyrolyzed CuO nanostructures for air-quality monitoring
Source abstract
Abstract
Abstract Chemiresistive gas sensors still suffer from fast response/recovery kinetics at low operating temperatures when detecting trace-level analytes. The work systematically describes the effect of indium incorporation on NO 2 sensing behavior in spray pyrolysis-prepared CuO thin films. The 1% indium-containing film shows a response time of ∼7 s and recovery time of ∼35 s, along with a response of 104% to 4 ppm NO 2 at an operating temperature of 180 °C. The enhanced response kinetics is linked to dopant-induced defect chemistry and oxygen vacancy distribution, which controls the charge transport and gas-surface interactions in the CuO matrix. In contrast, higher indium addition (3% and 5%) induces a transition in the dominant electronic character of the films, leading to the formation of n-p heterojunctions with a consequent change in sensing kinetics upon NO 2 exposure. The results corroborate controlled indium addition to tune the defect states and electronic structure in CuO for obtaining metal oxide gas sensors with pre-defined performance characteristics.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Copper-based nanomaterials and applications · Gas Sensing Nanomaterials and Sensors · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Short term associations of ambient nitrogen dioxide with daily total, cardiovascular, and respiratory mortality: multilocation analysis in 398 cities10.1136/bmj.n534 ↗
2. High-sensitivity NO2 gas sensor: exploiting UV-enhanced recovery in a hexadecafluorinated iron phthalocyanine-reduced graphene oxide10.1021/acsomega.4c08662 ↗
3. Ultraflexible chemiresistive NO2 gas sensor realized with photopatterned porous polymer film10.3390/chemosensors13060216 ↗
4. Synergistic enhancement of chemiresistive NO2 gas sensors using nitrogen-doped reduced graphene oxide (N-rGO) decorated with nickel oxide (NiO) nanoparticles: achieving sub-ppb detection limit10.3390/s25051631 ↗
5. Metal oxide gas sensors with nanosheet morphology: a review10.1016/j.microc.2025.114510 ↗
6. Abnormal p-type gas-sensing response to ether in Co-ZnO nanocomposite film and its significant room-temperature magnetoresistance10.1002/adfm.202422705 ↗
7. Sensing of ultra-ppm level NO2 gas via synergistic effects of Cr doping and e-beam irradiation in WO3 nanostructures
8. Spray deposited high performance Fe-doped ZnO ethanol sensor operating at low temperatures10.1016/j.jiec.2025.01.053 ↗
9. Effect of nitrogen doping on structural and optical properties of ZnO nanoparticles10.1016/j.pnsc.2015.08.003 ↗
10. Defect engineering approaches for metal oxide semiconductor-based chemiresistive gas sensing10.1016/j.ccr.2025.216836 ↗
11. Dual-functional green facile synthesis of graphene doped CuO-SnO2: F sprayed thin film as an efficient photocatalyst and ammonia gas sensor at low concentration10.1016/j.ceramint.2025.02.294 ↗
12. Investigation of the influence of adhesion layers on the gas sensing performance of CuO/Cu2O thin films10.3390/chemosensors13030080 ↗
13. Synthesis of CuO thin film sensors by spray pyrolysis method for NO2 gas detection10.1016/j.matpr.2020.05.583 ↗
14. Growth and sensing properties of networked p-CuO nanowires10.1016/j.snb.2014.12.081 ↗
15. Efficient room temperature carbon dioxide gas sensor based on barium doped CuO thin films10.1007/s10853-023-08687-x ↗
16. Selective detection of NO2 using Cr-doped CuO nanorods10.3390/s120608013 ↗
17. Electronic sensitization of CuO thin films by Cr-doping for enhanced gas sensor response at low detection limit10.1088/2053-1591/aae0d8 ↗
18. Room temperature gas sensor based on La2O3 doped CuO thin films10.1007/s00339-020-03751-8 ↗
19. Enhanced ethanol sensing response of nanostructured Ce-doped CuO thin films10.1016/j.matchemphys.2022.125841 ↗
20. Facile synthesis of indium-doped cuprous oxide catalyst for enhanced electrochemical reduction of CO2 to CO10.1016/j.jallcom.2025.181901 ↗
21. Performances of In-doped CuO-based heterojunction gas sensor10.1007/s10854-019-02599-w ↗
22. Performances of in-doped CuO-based heterojunction gas sensor10.1007/s10854-019-02599-w ↗
23. Bimetallic organic framework-derived In2O3/CuO nanocubes for highly sensitive detection of acetone and its first-principles analysis10.1016/j.microc.2025.115512 ↗
24. Precursor molarity controls copper oxide thin film properties in spray pyrolysis structural, optical and electrical characterization10.1016/j.ceramint.2025.10.168 ↗
25. Opposite sensing response of H2 and CO on In2O3− Co3O4 nanocomposite-based gas sensors over a wide temperature range10.1016/j.snb.2025.137511 ↗
26. Biogenic synthesis of copper nanoparticles from lantana camara flower extract: antioxidant and anticancer activities
27. Synthesis of cadmium doped CuO thin films via spray pyrolysis and optimization of the optical band gap using Taguchi approach10.1016/j.matchemphys.2025.130666 ↗
28. Enhanced CuO thin film growth via an optimized aerosol droplet method: thermal effects and structural evaluation10.1002/adom.202500980 ↗
29. Growth-temperature dependent unpassivated oxygen bonds determine the gas sensing abilities of chemical vapor deposition-grown CuO thin films10.1021/acsami.1c01085 ↗
30. Modified scherrer equation to estimate more accurately nano-crystallite size using XRD10.4236/wjnse.2012.23020 ↗
31. Structural, vibrational and electronic properties of CuO nanoparticles synthesized via exploding wire technique10.1016/j.ceramint.2017.10.224 ↗
32. Fabrication of Er, Tb doped CuO thin films using nebulizer spray pyrolysis technique for photosensing applications10.1016/j.optmat.2021.111954 ↗
33. Unlocking high-Performance CO2 electroreduction to CO with dual-doped cuo catalysts: synergistic effects of Sn and Ga for enhanced selectivity and activity10.1016/j.electacta.2025.146635 ↗
34. Molybdenum-doped CuO nanosheets on Ni foams with extraordinary specific capacitance for advanced hybrid supercapacitors10.1007/s10853-019-04129-9 ↗
35. Subsurface oxygen defects electronically interacting with active sites on In2O3 for enhanced photothermocatalytic CO2 reduction10.1038/s41467-022-30958-5 ↗
36. Controllable synthesis of In2O3 octodecahedra exposing {110} facets with enhanced gas sensing performance10.1039/C5RA05212B ↗
37. Optimized nanostructured In2O3 gas sensors: harnessing annealing-induced defects and oxygen vacancies for ultra-sensitive and selective H2S detection at trace levels10.1039/D5RA01394A ↗
38. Enhancing structural and optical properties of CuO thin films through gallium doping: a pathway to enhanced photoluminescence and predict for solar cells applications10.1016/j.chphi.2025.100832 ↗
39. Development of enduring interstitial defects in Mg-doped CuO thin films10.1039/D4RA01414F ↗
40. Synthesis and characterization of CuO nanoparticles from bioleached copper through modified and optimized double precipitation method10.1021/acsomega.4c09064 ↗
41. Characterization of ZnO-CuO and ZnO-CuO-NiO nanocomposites prepared by co-precipitation and antibacterial properties10.1007/s00339-025-08273-9 ↗
42. Improving gas sensing performance by oxygen vacancies in sub-stoichiometric WO 3− x10.1039/C9RA00116F ↗
43. A review of gas sensors for CO2 based on copper oxides and their derivatives10.3390/s24175469 ↗
44. Recent advances on the gas-sensing properties and mechanism of perovskite oxide materials-a review10.1021/acsomega.4c11667 ↗
45. Overall perspective of electrospun semiconductor metal oxides as high-performance gas sensor materials for NOx detection10.1039/D3RA08119B ↗
46. Engineering oxygen vacancy defects on a CeO2-SnO2 micro-nano heterostructure for rapid triethylamine detection and fish freshness monitoring
47. Exploring the p-type to n-type transition in CuO thin films via zn doping: insights from M-SILAR synthesis10.1007/s11664-025-11980-x ↗
48. The n-type conduction of indium-doped Cu2O thin films fabricated by direct current magnetron co-sputtering10.1063/1.4928527 ↗
49. Modification of electrical and optical properties of CuO thin films by Ni doping10.1007/s10971-015-3953-4 ↗
50. Acetone sensors based on al-coated and ni-doped copper oxide nanocrystalline thin films10.3390/s24206550 ↗
51. High response H2S chemiresistive gas sensor based on multidimensional CuO/CeO2: the application for real-time portable alarm device10.1016/j.snb.2024.136884 ↗
52. A room-temperature NO2 gas sensor based on Zn2+ doped Cu2O/CuO composites with ultra-high response10.1016/j.ceramint.2024.11.197 ↗
53. Room-temperature NO2 sensing properties and mechanism of CuO nanorods with Au functionalization10.1016/j.snb.2020.129070 ↗
54. A CuO/MoO3-based SO2 gas sensor with moisture resistance and ultra-fast response at 90 °C10.1016/j.snb.2024.136627 ↗
55. Ultrasensitive and ultra-selective room-temperature H2S gas sensor based on CuO-loaded In2O3 2D porous nanosheets10.1016/j.jhazmat.2025.138355 ↗