journal article·2026-02-27Open access

High-temperature sliding wear behavior of bound metal deposited AISI H13 tool steel with different infill patterns

Sasitorn Pramakhamo, Varunee Premanond, Witthaya Daodon, Phromphong Pandee

Materials Research Express· Volume 13· Issue 4

Abstract

Abstract This research investigates the tribological performance of AISI H13 hot-work tool steel fabricated via an additive manufacturing (AM) process, with a particular emphasis on the effects of different infill patterns. Motivated by the growing demand for advanced manufacturing methods capable of producing high-performance tooling with complex geometries, this study addresses a critical gap in understanding the high-temperature tribological behaviour of tool steels fabricated using the bound metal deposition (BMD) process. Wear tests were performed at elevated temperatures of up to 250 °C, and the results were benchmarked against conventionally manufactured specimens. The findings reveal that specific infill patterns can achieve wear resistance comparable to traditional manufacturing methods, with the concentric infill pattern exhibiting a lower wear volume than the line pattern. These outcomes demonstrate the potential of additive manufacturing, particularly BMD, as a viable technique for producing functional tool steels capable of operating under high-temperature contact conditions. The study highlights the need for further research to refine process parameters, improve microstructural control, and fully realize the advantages of AM for tooling applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Fracture toughness and wear resistance of heat-treated H13 tool steel processed by laser powder bed fusion10.1016/j.addma.2023.103862 ↗
2. An experimental analysis of the high-cycle fatigue fracture of H13 hot forging tool steels10.3390/ma15217411 ↗
3. Comparison of the fatigue strength between additively and conventionally fabricated tool steel 1.234410.1016/j.addma.2019.01.010 ↗
4. Thermal fatigue behavior of AISI H13 hot work tool steel produced by direct laser metal deposition10.1002/srin.202200449 ↗
5. Design and additive manufacturing of novel conformal cooling molds10.1016/j.matdes.2020.109147 ↗
6. A fully automatic non-planar slicing algorithm for the additive manufacturing of complex geometries10.1016/j.addma.2023.103541 ↗
7. Additive manufacturing of metallic materials
8. Jr, Recent progress in hybrid additive manufacturing of metallic materials10.3390/app13148383 ↗
9. SLM tooling for die casting with conformal cooling channels10.1007/s00170-013-5523-7 ↗
10. Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting10.1007/s00170-017-0426-7 ↗
11. Hot extrusion dies with conformal cooling channels produced by additive manufacturing10.1016/j.matpr.2015.10.028 ↗
12. ASTM52900-15 · 2015 · vol 3 · p 5
13. Tension testing of additively manufactured specimens of 17-4 PH processed by bound metal deposition10.1088/1757-899X/1201/1/012037 ↗
14. Influence of build orientation, chamber temperature and infill pattern on mechanical properties of 316l parts manufactured by bound metal deposition10.3390/ma15031183 ↗
15. Effect of print parameters on additive manufacturing of metallic parts: performance and sustainability aspects10.1038/s41598-022-22613-2 ↗
16. Influence of the layer directions on the properties of 316l stainless steel parts fabricated through fused deposition of metals10.3390/ma13112493 ↗
17. Welding of additively and conventionally manufactured 316 L stainless steel10.1016/j.mtcomm.2025.112683 ↗
18. Laser surface polishing of material extrusion additively manufactured 316L stainless steel10.1016/j.optlastec.2025.114442 ↗
19. Microstructure and mechanical properties of X65MoCrWV3-2 cold-work tool steel produced by selective laser melting10.1016/j.addma.2018.08.005 ↗
20. Microstructure, mechanical, and tribological properties of M3: 2 high-speed steel processed by selective laser melting, hot-isostatic pressing, and casting10.1016/j.addma.2019.05.028 ↗
21. Investigation of the mechanical properties of additively manufactured metal parts with different relative densities10.3390/app12199915 ↗
22. Filament extrusion-based additive manufacturing of 316L stainless steel: effects of sintering conditions on the microstructure and mechanical properties10.1016/j.addma.2022.103147 ↗
23. Process-structure-property relationships of AISI H13 tool steel processed with selective laser melting10.3390/ma12142284 ↗
24. The effect of laser surface melting on the retained austenite and wear properties of AISI D2 tool steel10.1016/j.ijleo.2021.168469 ↗
25. Assessment of laser power and scan speed influence on microstructural features and consolidation of AISI H13 tool steel processed by additive manufacturing10.1016/j.addma.2020.101250 ↗
26. Effect of laser speed on microstructure and mechanical properties of AISI H13 tool steel prepared by laser powder bed fusion process10.1007/s11665-021-06321-y ↗
27. Influence of selective laser melting technology process parameters on porosity and hardness of AISI H13 tool steel: statistical approach10.3390/ma14206052 ↗
28. Effect of heat treatment on microstructure and mechanical properties of laser additively manufactured AISI H13 tool steel10.1007/s11665-017-2992-0 ↗
29. Effect of printing orientation on mechanical properties of components in stainless steel obtained using the Bound Metal Deposition technology10.1016/j.procir.2023.06.119 ↗
30. Influence of aging treatments on 17–4 PH stainless steel parts realized using material extrusion additive manufacturing technologies10.1007/s00170-023-11136-3 ↗
31. Investigation on corrosion resistance properties of 17-4 PH bound metal deposition As-sintered specimens with different build-up orientations10.3390/met12040588 ↗
32. Microstructure and defect analysis of 17-4PH stainless steel fabricated by the bound metal deposition additive manufacturing technology10.3390/cryst13091312 ↗
33. Bound metal deposition of stainless steel 316L: effect of process variables on microstructural and mechanical behaviors10.1016/j.mtla.2024.102196 ↗
34. Post-processing of material extrusion additively manufactured 17-4PH stainless steel via aging and multi-step shot peening: surface integrity and wear response10.1016/j.wear.2025.206383 ↗
35. Microstructure evolution during binder jet additive manufacturing of H13 tool steel10.1016/j.addma.2020.101534 ↗
36. Developing cost-effective indirect manufacturing of H13 steel from extrusion-printing to post-processing10.1016/j.addma.2022.103384 ↗
37. Effects of conventional heat treatment on wear resistance of AISI H13 tool steel10.1016/j.wear.2004.09.008 ↗
38. Evaluation of carbon diffusion in heat treatment of H13 tool steel under different atmospheric conditions10.1016/j.jmrt.2014.10.014 ↗
39. Desktop Metal · 2022
40. Porosity comparative analysis of porous copper and OOF modelling10.1007/s10934-015-9973-1 ↗
41. Modern tribology handbook: vol. 1-principles of tribology
42. Part deflection and residual stresses in laser powder bed fusion of H13 tool steel10.1016/j.matdes.2021.109659 ↗
43. Influence of porosity on Young’s modulus and Poisson’s ratio in alumina ceramics10.1016/S0955-2219(00)00314-9 ↗
44. Environmentally benign tribo-systems for metal forming10.1016/j.cirp.2010.05.007 ↗
45. Investigations of the microstructure and mechanical properties of 17-4 PH ss printed using a MarkForged metal X10.3390/ma15196898 ↗
46. Influence of carbide particle size on the wear performance of cryogenically treated H13 die steel10.1080/02670844.2019.1701858 ↗
47. Wear resistance of H13 and a new hot-work die steel at high temperature10.1007/s11665-016-2124-2 ↗
48. Shizhu · 2012