journal article·2026-01-14Open access

Investigation into the regulation of diamond magnetic composite abrasives for polishing of sapphire domes

Wei Feng, Xiaokang Sun, Shuai Zhou, Wenzhuang Lu

Materials Research Express· Volume 13· Issue 1

Abstract

Abstract Diamond magnetic composite abrasives were utilized to achieve precision polishing of sapphire domes. The synthesized diamond particles were uniformly dispersed and partially embedded within the iron powder matrix, and a magnetic abrasive regulation model was developed within the tool to define its optimal rotational speed range. This study systematically examined the influence of tool rotational speed, polishing duration, slurry concentration, and applied pressure on the surface roughness and material removal rate of sapphire domes and identified the optimal combination of processing parameters for each factor. After polishing, the sapphire dome demonstrated an infrared transmittance as high as 85%. During the polishing of sapphire using diamond magnetic abrasives, the abrasive particles remain flexibly confined between the workpiece and tool, continually engaging the surface with renewed cutting edges throughout the process. This intrinsic self-dressing behavior promotes sustained micro-cutting and contributes to the attainment of superior surface quality. After polishing, the diamond particles in the composite abrasives exhibited no significant wear and only minor particle detachment was observed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Tunneling and Rock Mechanics · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Study on characteristics of high-strength nano infrared ceramic dome for mid-infrared missile10.3788/AOS202141.0716002 ↗
2. Adaptive optimization technology of a conformal infrared dome based on the Von Karman surface under hypersonic conditions10.1364/OE.492866 ↗
3. Numerical analysis of thermal radiation noise of shock layer over an infrared optical dome at near-ground altitudes10.1016/j.infrared.2018.12.020 ↗
4. High quality sapphire crystal by advanced chemical transport process10.1016/j.jeurceramsoc.2020.05.069 ↗
5. Characterization of polish-induced gouges on single crystal sapphire substrates10.1149/2162-8777/ad4675 ↗
6. Effect of a patterned sapphire substrate on indium localization in semipolar (11-22) GaN-based light-emitting diodes-ScienceDirect10.1016/j.tsf.2020.138077 ↗
7. Development of mid-infrared transmitting glasses window and applications.10.3788/AOS201131.0900134 ↗
8. Parametric experimental study and design of experiment modelling of sapphire grinding10.1016/j.jclepro.2016.09.031 ↗
9. Research on removal mechanism of longitudinal-torsional compound ultrasonic vibration end grinding sapphire10.1016/j.surfin.2025.107690 ↗
10. The performance of a novel nano-SiO2 dispersion solutions for the chemical-mechanical polishing of sapphire.10.1016/j.apsusc.2025.163831 ↗
11. Investigate on surface/subsurface damage mechanisms and manufacturability of ultra-smooth surface in ultra-precision ductile grinding of sapphire optics10.1016/j.jmrt.2024.12.213 ↗
12. Characterization of ultrasonic vibration and polishing force in sapphire ultrasonic vibration-assisted flexible polishing: Insights from in situ monitoring systems10.1016/j.ultras.2024.107431 ↗
13. Fabrication of millimeter-long structures in sapphire using femtosecond infrared laser pulses and selective etching10.1016/j.optlaseng.2020.106114 ↗
14. Investigation on the material removal mechanism of sapphire wafer by novel green slurry in semi-fixed abrasive polishing10.1016/j.wear.2025.205762 ↗
15. Study on material removal mechanism of sapphire wafer with CeO2 coated diamond composite abrasives via green polishing.10.1016/j.jmapro.2023.02.062 ↗
16. Study on effect of the surface variation of colloidal silica abrasive during chemical mechanical polishing of sapphire10.7567/JJAP.56.07KB01 ↗
17. Preparation of non-spherical colloidal silica nano-particle and its application on chemical mechanical polishing of sapphire10.1007/s11595-019-2019-9 ↗
18. Effect of potassium persulfate as an additive on chemical mechanical polishing performance on C-, A- and R-plane sapphire10.1149/2162-8777/aba32f ↗
19. Effects of polishing parameters on surface quality in sapphire double-sided CMP10.1016/j.ceramint.2020.02.116 ↗
20. Preparation of SiC/SiO2 hard core-soft shell abrasive and its CMP behavior on sapphire substrate.10.1007/s11664-019-07683-9 ↗
21. A magnetic abrasive finishing (MAF) platform utilizing horizontal transverse magnetic field magnetized by permanent magnets10.1007/s00542-020-05172-2 ↗
22. Magnetic abrasive finishing process based on compound magnetic field of pulse electromagnet and alternating permanent magnet10.1007/s12541-025-01246-1 ↗
23. Effect of strong flexible polycrystalline diamond abrasive tools in magnetic abrasive finishing of V-grooved ceramic guide rollers10.1016/j.mtcomm.2022.104333 ↗
24. Study on the magnetic abrasive finishing process using alternating magnetic field-discussion on the influence of current waveform variation10.1007/s00170-021-07048-9 ↗
25. Modeling of material removal in magnetic abrasive finishing process with spherical magnetic abrasive powder10.1016/j.ijmecsci.2020.105601 ↗
26. Parametric study of magnetic abrasive finishing process10.1016/j.jmatprotec.2003.10.030 ↗
27. A review of magnetic-assisted machining processes10.1007/s40430-019-1944-z ↗
28. Effects of variable magnetic field assisted EDM on MRR and surface integrity of AZ80 magnesium10.1080/10426914.2022.2157434 ↗