Achieving an ultra-high strength of high-Al-containing Mg-Al alloys via elements addition, extrusion and ageing treatment
Source abstract
Abstract
Abstract The microstructure and mechanical property of peak-aged extruded Mg-11Al alloys with Ag and Sc addition were investigated by XRD, SEM, TEM and universal tensile machine. The microstructure of extruded Mg-11Al and Mg-11Al-1Ag alloys is composed of ɑ-Mg matrix and Mg 17 Al 12 phase. The rod-shaped and block-shaped Mg 17 Al 12 precipitates were observed in peak-aged extruded (PAE) Mg-11Al and Mg-11Al-1Ag-0.4Sc alloys. The orientation relationship between Mg 17 Al 12 precipitates and α -Mg matrix can be determined as: (110) β //(0002) α in PAE Mg-11Al-1Ag-0.4Sc alloy. And Ag, Sc addition increases the number density of Mg 17 Al 12 precipitates. The microstructure of PAE Mg-11Al-1Ag-0.4Sc alloy is composed of Mg 17 Al 12 precipitates, stable Al 3 Sc phase and α -Mg matrix with an average grain size about 1.51 μm. The PAE Mg-11Al-1Ag-0.4Sc alloy obtains an ultimate tensile strength (UTS) of 411 MPa and an elongation (EL) of 11.6%. The micro hardness value of PAE Mg-11Al-1Ag-0.4Sc alloy reaches 111 HV, which is obviously higher than that (103 HV) of PAE Mg-11Al alloy. The high-Al-containing Mg-Al alloy achieves a noticeable comprehensive mechanical property depending on elements addition, extrusion and ageing treatment. Corresponding mechanism was deeply discussed from grain refinement, solid solution strengthening, precipitation strengthening and second phase strengthening in this study.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Dispersion of stable quasicrystal phase by precipitation during extrusion in a Mg–Zn–Al alloy: microstructure and mechanical properties10.1016/j.msea.2023.145979 ↗
2. Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion10.1016/j.actamat.2018.07.014 ↗
3. Effects of Mg17Al12 phase on microstructure evolution and ductility in the AZ91 magnesium alloy during the continuous rheo-squeeze casting-extrusion process10.1016/j.jmst.2023.12.031 ↗
4. Relationship between microstructure and mechanical properties of as-extruded and peak-aged Mg-6Al-3Sn-2Zn alloys10.1016/S1003-6326(23)66190-4 ↗
5. Developing an industrial-scale ECAP Mg-Al-Zn alloy with multi-heterostructure for synchronously high strength and good ductility10.1016/j.matchar.2020.110341 ↗
6. Effect of annealing on microstructure evolution and age-hardening behavior of dilute Mg–Al–Ca–Mn alloy10.1016/j.jmrt.2022.03.091 ↗
7. Microstructure and mechanical properties of modified Mg–8Al–2Sn alloys using Zn addition combined with artificial aging treatment10.1016/j.msea.2021.142278 ↗
8. Microstructure and texture evolution of the β-Mg17A12 phase in a Mg alloy with an ultra-high Al content10.1016/j.jmst.2020.04.021 ↗
9. Optimization in strength-ductility of heterogeneous Mg-13Gd alloy via small extrusion ratio combined with pre-aging10.1016/j.msea.2021.142540 ↗
10. High-speed indirect extrusion of Mg–Sn–Al–Zn alloy and its influence on microstructure and mechanical properties10.1016/j.jallcom.2016.01.163 ↗
11. Dynamic precipitation and recrystallization in Mg-9wt% Al during equal-channel angular extrusion: a comparative study to conventional aging10.1016/j.actamat.2019.04.046 ↗
12. Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys10.1016/S1359-6462(02)00497-9 ↗
13. Microstructure and mechanical properties of a ag micro-alloyed Mg-5Sn alloy10.1007/s11665-018-3433-4 ↗
14. Aging behavior of a fine-grained Mg-10.6Gd-2Ag alloy processed by ECAP10.1016/j.matchar.2020.110398 ↗
15. Interphase boundary segregation of silver and enhanced precipitation of Mg17Al12 phase in a Mg-Al-Sn-Ag alloy10.1016/j.scriptamat.2018.05.047 ↗
16. Age hardening response and microstructure of Mg–8Sn–4Al alloy with Ag10.1016/j.msea.2022.143596 ↗
17. Effect of minor Sc on the microstructure and mechanical properties of AZ91 magnesium alloy10.1016/j.pnsc.2018.01.006 ↗
18. Characterization and preparation of Mg–Al–Zn alloys with minor Sc10.1016/j.jallcom.2009.04.113 ↗
19. Synergistic effect of Mn + Sc additions on the microstructure evolution and mechanical properties of Mg-Gd-Y-Mn-Sc alloy10.1016/j.jmrt.2022.11.015 ↗
20. Effects of Zn additions on the microstructure and hardness of Mg–9Al–6Sn alloy10.1016/j.matchar.2016.01.021 ↗
21. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗
22. Improvement of strength and ductility synergy and the elimination of the yield point phenomenon of ultrafine-grained Mg–Al–Zn–Ag alloy sheet10.1016/j.jmrt.2023.01.209 ↗
23. A new high-strength extruded Mg-8Al-4Sn-2Zn alloy10.1016/j.matlet.2014.10.033 ↗
24. Design of multicomponent Mg–Al–Zn–Sn–Bi alloys with refined microstructure and enhanced tensile properties10.1016/j.msea.2020.139696 ↗
25. Enhanced ductility of as-extruded Mg–Al–Zn—xY (x = 0.4 and 1.4wt%) magnesium alloys10.1016/j.jmrt.2022.10.052 ↗
26. Effect of characteristics and distribution of Mg17Al12 precipitates on tensile and bending properties of high-Al-containing Mg alloys10.1016/j.jma.2024.01.018 ↗
27. Enhanced strength and ductility AZ91 alloy with heterogeneous lamella structure prepared by pre-aging and low-temperature extrusion10.1016/j.msea.2021.141094 ↗
28. Tailoring hierarchical microstructures to improve the strength and plasticity of a laser powder bed fusion additively manufactured Ti-6Al-4V alloy10.1016/j.addma.2023.103603 ↗
29. Achievement of high strength and good ductility in the large-size AZ80 mg alloy using a designed multi-directional forging process and aging treatment10.1016/j.jmatprotec.2022.117828 ↗
30. Enhanced strength of WE43 magnesium-rare earth alloy via combining extrusion and aging10.1016/j.msea.2023.145329 ↗
31. Improved age-hardening behavior of Mg–Sn–Mn alloy by addition of Ag and Zn10.1016/j.msea.2012.05.033 ↗
32. Effects of extrusion and Ag, Zn addition on the age-hardening response and microstructure of a Mg-7Sn alloy10.1016/j.msea.2016.03.037 ↗
33. A new strong and ductile multicomponent rare-earth free Mg–Bi-based alloy achieved by extrusion and subsequent short-term annealing10.1016/j.msea.2022.144309 ↗
34. Novel Mg-Bi-Mn wrought alloys: the effects of extrusion temperature and Mn addition on their microstructures and mechanical properties10.1016/j.jma.2021.11.028 ↗
35. Influence of minor Ce additions on the microstructure and mechanical properties of Mg-1.0Sn-0.6Ca alloy10.1016/j.jmst.2019.07.036 ↗
36. Effects of Zn/Al mass ratio on microstructure evolution and mechanical properties of Mg–Sn based alloys10.1016/j.msea.2021.141307 ↗
37. Tailoring precipitates in Mg–12Gd-3Y alloys by Sn addition to obtain superior elevated temperature mechanical properties10.1016/j.msea.2023.145006 ↗