journal article·2025-10-01Open access

Synergistic control of composition and processing in Al-Mg-Si alloy conductors: development and performance mechanism investigation

Shanquan Deng, Junwei Zhu, Meihua Bian, Xingsen Zhang, Heng Chen, Yuyin He

Materials Research Express· Volume 12· Issue 10

Abstract

Abstract This study aims to address the critical challenge of synergistically optimizing strength and electrical conductivity in Al-Mg-Si alloy conductors, in response to the growing demand for high-performance conductive materials in smart grids and lightweight transmission lines. By systematically regulating the Mg/Si ratio (1.1 – 1.9), annealing process, cold drawing speed, and aging treatment, we identified the alloy composition and heat treatment regimen with the best overall performance and elucidated the underlying microstructural mechanisms. The results show that the Al-0.85Mg-0.5Si alloy (Mg/Si = 1.7) subjected to annealing at 340 °C for 4 h and aging at 300 °C for 10 h exhibits an optimal property combination: a tensile strength of approximately 130 MPa and an electrical conductivity exceeding 62% IACS. Mechanistic studies reveal that the formation of uniformly dispersed coherent β″ precipitates and a high proportion of high-angle grain boundaries (84%) in this alloy significantly enhance strength while effectively reducing electron scattering. Furthermore, increasing the cold drawing speed (0.5–2.5 m min−1) showed no significant influence on performance, indicating a broad processing window suitable for industrial application. This work not only provides a clear composition-process-property relationship framework for developing high-strength and high-conductivity Al-Mg-Si alloys, but also offers important theoretical insights and application prospects for replacing traditional copper conductors and advancing the lightweight and low-carbon development of energy equipment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Effects of graphene doping on the electrical conductivity of copper10.1002/adfm.202407569 ↗
2. Heat-resistant aluminium alloys10.1038/s41563-022-01436-6 ↗
3. Microstructures and properties of 6016 aluminum alloy with gradient composition10.1007/s12598-020-01515-0 ↗
4. Relationship between process parameters and mechanical properties of friction stir processed AA6063-T6 aluminum alloy10.1016/j.matdes.2010.12.049 ↗
5. Microstructure and property enhancement of 7075 aluminium alloy via laser metal deposition augmented by in situ ultrasonic vibration10.1080/17452759.2023.2301482 ↗
6. Investigation of buckling resistance of cable-stiffened aluminium alloy columns10.1016/j.tws.2021.107946 ↗
7. Effect of high-pressure heat treatment on the recrystallization and recrystallization texture of CC 5005 aluminum alloy10.1016/j.jmrt.2023.08.018 ↗
8. Influence of Mg and Si content and heat treatment on electrical conductivity and hardness of AA6101 Al alloy10.1007/s10853-023-08288-8 ↗
9. Effects of natural aging and pre-aging on the strength and electrical conductivity in Al-Mg-Si AA6201 conductor alloys10.1016/j.msea.2021.141538 ↗
10. Effects of various Mg/Si ratios on microstructure and performance property of Al-Mg-Si alloy cables10.1016/j.matchar.2016.07.011 ↗
11. Quantitative mechanisms behind the high strength and electrical conductivity of Cu-Te alloy manufactured by continuous extrusion10.1016/j.jmst.2021.12.046 ↗
12. Brittle fracture theory describes the onset of frictional motion10.1146/annurev-conmatphys-031218-013327 ↗
13. Dynamic lattice distortion in metallic nanocrystals10.1016/j.actamat.2022.118491 ↗
14. Understanding the precipitation mechanism of copper-bearing phases in Al-Mg-Si system during thermo-mechanical treatment10.1016/j.jmst.2021.04.026 ↗
15. Nucleation of recrystallization in magnesium alloy grains of varied orientation and the impacts on texture evolution10.1016/j.jma.2022.09.006 ↗
16. Dislocation densities and intergranular stresses of plastically deformed austenitic steels10.1016/j.msea.2018.09.052 ↗
17. Influence of strain rate on grain refinement and texture evolution under complex shear stress conditions10.1016/j.jma.2022.11.020 ↗
18. Influence of a modified drawing process on the resulting residual stress state of cold drawn wire10.1051/matecconf/201819004004 ↗
19. Topological phenomena at defects in acoustic, photonic and solid-state lattices10.1038/s42254-023-00602-2 ↗
20. Synthesis of complex nanomaterials via Ostwald ripening10.1039/C3TA14203E ↗