Tuning mechanical performance of PCL scaffolds: influence of 3D bioprinting parameters, polymer concentration, and solvent selection
Source abstract
Abstract
Abstract The mechanical performance of three-dimensional (3D) bioprinted scaffolds is susceptible to printing parameters and material formulation. In this study, poly ( ε -caprolactone) (PCL) scaffolds were fabricated using four different polymer concentrations (10%, 25%, 50%, and 75% w/v) to investigate how these variations, along with process parameters, influence mechanical behavior. Maintaining the structural integrity of bioprinted constructs requires careful optimization of polymer concentration and precise control over parameters such as printing speed, pressure, and infill density. Tensile tests were conducted to evaluate the effects of these variables. Among the tested conditions, a 50% (w/v) concentration allowed for a broader operational window, enabling fabrication across a range of printing speeds and pressures. At a printing speed of 5 mm s −1 , PCL-DCM exhibited a Young’s modulus of 39.0 MPa, while PCL-CF samples printed at 10 mm s −1 achieved the highest modulus of 32.0 MPa. Notably, when the printing speed was kept constant, applying higher pressures led to an increase in Young’s modulus, suggesting that pressure plays a key role in enhancing scaffold stiffness. When comparing the 50% and 75% (w/v) polymer concentrations, the 50% (w/v) formulation stood out by offering both higher elongation and greater stiffness, which makes it particularly suitable for load-bearing applications. These findings provide a quantitative framework for optimizing extrusion-based bioprinting of PCL scaffolds, with implications for customized biomedical implants and regenerative medicine.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Recent advances in 3D printing of biomaterials10.1186/s13036-015-0001-4 ↗
2. Microfluidic-enhanced 3D bioprinting of aligned myoblast-laden hydrogels leads to functionally organized myofibers in vitro and in vivo10.1016/j.biomaterials.2017.03.026 ↗
3. Scaffold fabrication technologies and structure/function properties in bone tissue engineering10.1002/adfm.202010609 ↗
4. Various manufacturing methods and ideal properties of scaffolds for tissue engineering applications10.1016/j.smmf.2022.100011 ↗
5. Bioprinting technology and its applications10.1093/ejcts/ezu148 ↗
6. 3D bioprinting: printing the future and recent advances10.1016/j.bprint.2022.e00211 ↗
7. 3D bioprinting for biomedical devices and tissue engineering: a review of recent trends and advances10.1016/j.bioactmat.2017.11.008 ↗
8. Investigation of Ti64 sheathed cellular anatomical structure as a tibia implant10.1088/2057-1976/ab0bd7 ↗
9. Scaffolds for bone-tissue engineering10.1016/j.matt.2022.06.003 ↗
10. Bioprinting of hybrid tissue constructs with tailorable mechanical properties10.1088/1758-5082/3/2/021001 ↗
11. A comparative review of natural and synthetic biopolymer composite scaffolds10.3390/polym13071105 ↗
12. The return of a forgotten polymer - polycaprolactone in the 21st century10.1016/j.progpolymsci.2010.04.002 ↗
13. A review of preparation methods of porous skin tissue engineering scaffolds10.1016/j.mtcomm.2022.104109 ↗
14. Cardiovascular 3D bioprinting: a review on cardiac tissue development10.1016/j.bprint.2022.e00221 ↗
15. In vitro and in vivo study of PCL/COLL wound dressing loaded with insulin-chitosan nanoparticles on cutaneous wound healing in rats model10.1016/j.ijbiomac.2018.05.184 ↗
16. Use of 3D-printed polycaprolactone+hyaluronic acid-based scaffold in orthopedic practice: report of two cases10.2217/3dp-2022-0020 ↗
17. 3D bioprinting of developmentally inspired templates for whole bone organ engineering10.1002/adhm.201600182 ↗
18. Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink10.1038/ncomms4935 ↗
19. Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system10.1088/0960-1317/22/8/085014 ↗
20. Cell(MC3T3-E1)-printed poly(ε-caprolactone)/alginate hybrid scaffolds for tissue regeneration10.1002/marc.201200524 ↗
21. Multi-material 3D bioprinting of porous constructs for cartilage regeneration10.1016/j.msec.2019.110578 ↗
22. Mechanical properties of hybrid triphasic scaffolds for osteochondral tissue engineering10.1016/j.matlet.2019.126893 ↗
23. Current advances in 3D bioprinting technology and its applications for tissue engineering10.3390/polym12122958 ↗
24. On the detailed mechanical response investigation of PHBV/PCL and PHBV/PLGA electrospun mats10.1088/2053-1591/ab0eaa ↗
25. Stem cells combined 3D electrospun nanofibrous and macrochannelled matrices: a preliminary approach in repair of rat cranial bones10.1080/21691401.2019.1593850 ↗
26. Experimental tracheal replacement using 3-dimensional bioprinted artificial trachea with autologous epithelial cells and chondrocytes10.1038/s41598-019-38565-z ↗
27. Reinforcing bioceramic scaffolds with in situ synthesized ε-polycaprolactone coatings10.1002/jbm.a.34657 ↗
28. Effect of polymer infiltration on the flexural behavior of β-tricalcium phosphate robocast scaffolds10.3390/ma7054001 ↗
29. Improving mechanical properties of 13–93 bioactive glass robocast scaffold by poly(lactic acid) and poly(ε-caprolactone) melt infiltration10.1016/j.jnoncrysol.2015.02.025 ↗
30. Parameters affecting the mechanical properties of three-dimensional (3D) printed carbon fiber-reinforced polylactide composites10.3390/polym12112456 ↗
31. Polymers for 3D printing and customized additive manufacturing10.1021/acs.chemrev.7b00074 ↗
32. MWCNT nanocomposite films prepared using different ratios of PVC/PCL: combined FT-IR/DFT thermal and shape memory properties10.1016/j.molstruc.2023.134989 ↗
33. Electrospinning of poly(ε-caprolactone) (PCL) and poly ethylene glycol (PEG) composite nanofiber membranes using methyl ethyl ketone (MEK) and N N′-dimethyl acetamide (DMAc) solvent mixture for anti-adhesion applications10.1016/j.mtcomm.2022.104718 ↗
34. Effect of printing process parameters on the shape transformation capability of 3D Printed structures10.3390/polym14010117 ↗
35. Effect of different solvents on poly(caprolactone)(PCL) electrospun nonwoven membranes10.1007/s10973-011-1640-4 ↗
36. Effects of extrusion pressure and printing speed of 3D bioprinted construct on the fibroblast cells viability10.1088/1757-899X/440/1/012042 ↗
37. Biosynthetic PCL-graft-collagen bulk material for tissue engineering applications10.3390/ma10070693 ↗
38. The effect of 3D printing on the morphological and mechanical properties of polycaprolactone filament and scaffold10.1002/pat.4838 ↗
39. 3D-printed polycaprolactone mechanical characterization and suitability assessment for producing wrist–hand orthoses10.3390/polym15030576 ↗
40. Study on effects of FDM 3D printing parameters on mechanical properties of polylactic acid10.1088/1757-899X/688/3/033026 ↗
41. Accurate calibration in multi-material 3D bioprinting for tissue engineering10.3390/ma11081402 ↗
42. Co-electrospun nanofibrous mats loaded with bitter gourd (momordica charantia) extract as the wound dressing materials: in vitro and in vivo study10.1186/s12906-021-03284-4 ↗
43. Commercial wound dressings for the treatment of exuding wounds: an in-depth physico-chemical comparative study10.1093/burnst/tkac024 ↗
44. Feasibility of polycaprolactone scaffolds fabricated by three-dimensional printing for tissue engineering of tunica albuginea10.5534/wjmh.17025 ↗
45. Effect of infill on tensile and flexural strength of 3D printed PLA parts10.1088/1757-899X/429/1/012101 ↗
46. The effect of pore geometry on the mechanical properties of 3D-printed bone scaffold due to compressive loading10.1088/1757-899X/1051/1/012016 ↗
47. Additive manufacturing of anti-SARS-CoV-2 copper–tungsten–silver alloy10.1108/RPJ-06-2021-0131 ↗
48. Mechanical performance of additively manufactured cobalt-chromium-molybdenum auxetic meta-biomaterial bone scaffolds10.1016/j.jmbbm.2022.105409 ↗
49. Fabrication of drug-eluting nano-hydroxylapatite filled polycaprolactone nanocomposites using solution-extrusion 3D printing technique10.3390/polym13030318 ↗
50. Ozbolat · 2016 · 1
51. Effect of Infill pattern and infill density on mechanical behaviour of FDM 3D printed parts–a current review10.1016/j.matpr.2022.02.310 ↗
52. Molecular aspects of the fatigue and fracture of rubber10.5254/1.3538689 ↗
53. 3D plotted PCL scaffolds for stem cell-based bone tissue engineering10.1002/masy.200850911 ↗
54. Engineering anatomically shaped vascularized bone grafts with HASCs and 3D-printed PCL scaffolds10.1002/jbm.a.35107 ↗
55. Infill density influence on mechanical and thermal properties of short carbon fiber-reinforced polyamide composites manufactured by FFF process10.3390/ma15103706 ↗
56. Influence of porosity on osteogenesis bone growth and osteointegration in trabecular tantalum scaffolds fabricated by additive manufacturing10.3389/fbioe.2023.1117954 ↗
57. Fabrication of a polycaprolactone/alginate bipartite hybrid scaffold for osteochondral tissue using a three-dimensional bioprinting system10.3390/polym12102203 ↗
58. Solution extrusion additive manufacturing of biodegradable polycaprolactone10.3390/app10093189 ↗
59. Porous electrospun polycaprolactone (PCL) fibres by phase separation10.1016/j.eurpolymj.2015.01.028 ↗
60. Mechanistic investigation of drying regimes during solvent removal from poly(vinyl alcohol) films10.1002/(SICI)1097-4628(19990628)72:14<1913::AID-APP12>3.0.CO;2-L ↗
61. Drying of semicrystalline polymers: mathematical modeling and experimental characterization of poly(vinyl alcohol) films10.1016/j.polymer.2004.05.037 ↗
62. Study of solvent diffusion and solvent-induced crystallization in syndiotactic polystyrene using FT-IR spectroscopy and imaging10.1021/ma0476590 ↗
63. Solvent evaporation induced fabrication of porous polycaprolactone scaffold via low-temperature 3D printing for regeneration medicine researches10.1016/j.polymer.2021.123436 ↗
64. Morphology crystallinity and molecular weight of poly(ε-caprolactone)/graphene oxide hybrids10.3390/polym11071099 ↗
65. Energy elasticity of tie molecules in semicrystalline polymers10.1002/1521-3919(20020601)11:5<513::AID-MATS513>3.0.CO;2-W ↗
66. Structural mechanics of semicrystalline polymers prior to the yield point: a review10.1007/s10853-012-6620-y ↗
67. Callister · 2014
68. Monitoring of fracture propagation in brittle materials using acoustic emission techniques–a review
69. Effect of atmospheric plasma treatment on mode-I and mode-II fracture toughness properties of adhesively bonded carbon fiber/PEKK composite joints10.1016/j.engfracmech.2023.109463 ↗
70. Degradation kinetics of oligo(ε-caprolactone) ultrathin films: influence of crystallinity10.1557/s43580-021-00067-4 ↗
71. Hydrolytic degradation of porous crosslinked poly(ε-caprolactone) synthesized by high internal phase emulsion templating10.3390/polym12081849 ↗