Effect of heat treatment process on microstructure and properties of copper modified 1Cr11MoNiW1VNbN
Source abstract
Abstract
Abstract The purpose of this study was to investigate the effects of Cu element content and heat treatment process on the microstructure and mechanical properties of 1Cr11MoNiW1VNbN martensitic heat-resistant steel. Microstructure was characterized by optical microscope (OM) and scanning electron microscope (SEM), tensile testing machine and impact testing machine were used to test the mechanical property. The results show that with the increase of Cu content, the precipitation of Cu-rich phase in the steel increases, while the formation of δ-ferrite and coarse carbides decreases, which significantly improves the strength of the material. When the Cu content is 2.14%, the tensile strength at 600 °C reached 542 MPa and the yield strength reached 484 MPa after normalizing at 1000 °C and tempering at 700 °C. With the increase of the normalizing temperature, the strength of the test steel decreases slightly, and the impact energy improved significantly.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. China’s R&D of advanced ultra-supercritical coal-fired power generation for addressing climate change10.1016/j.tsep.2018.01.007 ↗
2. Modeling and control of supercritical and ultra-supercritical power plants: a review10.3390/en13112935 ↗
3. Gianfrancesco · 2016
4. Modern heat-resistant 11% Cr martensitic steel for power industry10.5604/01.3001.0015.6966 ↗
5. Yan · 2015
6. Martensite microstructure of 9–12% Cr steels weld metals10.1016/j.jmatprotec.2006.05.014 ↗
7. Some studies on P91 steel and their weldments10.1016/j.jallcom.2018.01.120 ↗
8. Quantification of laves phase particle size in 9CrW steel10.1016/S1044-5803(01)00159-0 ↗
9. Cross-weld creep comparison of power plant steels CrMoV, P91 and P9210.1115/1.4023430 ↗
10. High temperature strengthening in 12Cr-W-Mo steels by controlling the formation of delta ferrite10.1007/s11661-014-2411-1 ↗
11. Effect of cobalt on the microstructure of tempered martensitic 9Cr steel for ultra-supercritical power plants10.1016/j.msea.2008.04.131 ↗
12. Microstructural evolution of delta ferrite in SAVE12 steel under heat treatment and short-term creep10.1016/j.matchar.2012.08.009 ↗
13. A new strategy to improve the creep strength of a novel G115 steel by accelerating the precipitation of nano-sized MX and Cu-rich particles10.1016/j.scriptamat.2022.114903 ↗
14. Effects of Cu-rich phases on microstructure evolution and creep deformation behavior of a novel martensitic heat-resistant steel G11510.1016/j.msea.2022.143937 ↗
15. Strengthening mechanism of Cu bearing heat resistant martensitic steels10.2355/isijinternational.41.Suppl_S106 ↗
16. Creep properties, creep deformation behavior, and microstructural evolution of 9Cr-3W-3Co-1CuVNbB martensite ferritic steel10.1016/j.msea.2017.11.061 ↗
17. Microstructure evolution and fracture mechanism of a novel 9Cr tempered martensite ferritic steel during short-term creep10.1016/j.msea.2017.09.086 ↗
18. A physical-based yield strength model for the microstructural degradation of G115 steel during long-term creep10.1016/j.msea.2019.01.051 ↗
19. The bcc-to-9R martensitic transformation of Cu precipitates and the relaxation process of elastic strains in an Fe-Cu alloy10.1080/01418610008212077 ↗
20. Crystallographic model for bcc-to-9R martensitic transformation of Cu precipitates in ferritic steel10.1080/14786430600909014 ↗
21. Phase transformation of Cu-rich precipitates from 9R to 3R variant via ledges mechanism in ferritic steel containing copper10.1111/jmi.12352 ↗
22. Microstructure characterization of Cu-rich nanoprecipitates in a Fe-2.5 Cu-1.5 Mn-4.0 Ni-1.0 Al multicomponent ferritic alloy10.1016/j.actamat.2012.12.034 ↗
23. Influence of delta ferrite on the impact toughness of a PH 13-8 Mo maraging steel10.1016/j.msea.2022.144024 ↗
24. Kubaschewski · 2013
25. The precipitation strengthening behavior of Cu-rich phase in Nb contained advanced Fe-Cr-Ni type austenitic heat resistant steel for USC power plant application10.1016/j.pnsc.2012.05.002 ↗
26. Microanalysis of two creep resistant 9-12% chromium steels10.1016/S0921-5093(98)00532-2 ↗
27. A study on influence of heat input variation on microstructure of reduced activation ferritic martensitic steel weld metal produced by GTAW process10.1016/j.fusengdes.2010.12.035 ↗
28. Effect of δ-ferrite on the composition and volume fraction of precipitates in P92 steel aged at 700 and 750 °C10.3724/SP.J.1037.2012.00086 ↗
29. Strengthening of heat resistant martensitic steel by Cu addition10.4028/www.scientific.net/KEM.171-174.411 ↗
30. Effect of δ-ferrite evolution and high-temperature annealing on mechanical properties of 11Cr3W3Co ferritic/martensitic steel10.1007/s12540-016-5485-z ↗
31. Hot embrittlement and effect of grain size on hot ductility of martensitic heat-resistant steels10.1016/j.msea.2016.09.072 ↗
32. R&D of T92 high-pressure boiler tube for ultra supercritical pressure boilers
33. Influence of δ ferrite on impact toughness of M50NiL bearing steel10.1016/j.mtcomm.2023.107934 ↗
34. Influence of delta ferrite and dendritic carbides on the impact and tensile properties of a martensitic chromium steel10.1016/S0022-3115(98)00200-1 ↗