Investigating the microstructure and mechanical properties of deposited metal with ENiCrFe-7 covered electrode
Source abstract
Abstract
Abstract The effect of post weld heat treatment (PWHT) on microstructure and mechanical properties of deposited metal using ENiCrFe-7 covered electrode was investigated. The PWHT was conducted at 615 °C for 24 h. The results showed that three types of precipitates existed in both as-welded and PWHT deposited metals, i.e., NbC carbides, Al-Ti oxides in grains, and M23C6 carbides on grain boundaries. The M23C6 carbides coarsened after PWHT. The room temperature and elevated temperature (350 °C) tensile strength decreased by about 30 MPa, and elongation increased by about 3%–4% after PWHT. The tensile specimens presented ductile fracture feature and the dimples in PWHT condition were larger than that in as-welded condition. The hardness of deposited metal in as-welded condition was higher than that of PWHT condition. The impact toughness showed no significant change after PWHT. Both as-welded and PWHT impact specimens showed a mixed fracture mode with dominant ductile fracture and cleavage fracture.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Materials challenges in nuclear energy10.1016/j.actamat.2012.11.004 ↗
2. Effects of filler metal composition on joining properties of alloy 690 weldments10.1016/S0921-5093(02)00063-1 ↗
3. M23C6 precipitation behavior and grain boundary serration in Ni-based Alloy 69010.1016/j.matchar.2014.07.008 ↗
4. The effects of metallurgical factors on PWSCC crack growth rates in TT alloy 690 in simulated PWR primary water10.1007/s11661-015-2852-1 ↗
5. Weldability testing to understand composition effects on eutectic backfilling in Ni-30Cr alloys10.1007/s40194-019-00806-0 ↗
6. Characterization of stress corrosion cracks in Ni-based weld alloys 52, 52M and 152 grown in high-temperature water10.1016/j.matchar.2015.12.005 ↗
7. Dissimilar welding of nickel-based Alloy 690 to SUS 304L with Ti10.1016/j.jnucmat.2004.06.004 ↗
8. Effects of thermal aging on microstructures of low alloy steel-Ni base alloy dissimilar metal weld interfaces10.1016/j.jnucmat.2013.07.003 ↗
9. Carburization phenomenon of ENiCrFe 7 nickel based alloy covered electrode
10. Investigation on the microstructure and ductility-dip cracking susceptibility of the butt weld welded with ENiCrFe-7 nickel-base alloy-covered electrodes10.1007/s11661-014-2699-x ↗
11. SiO2 and CaF2 behavior during shielded metal Arc welding and their effect on slag detachability of the CaO-CaF2-SiO2 type ENiCrFe-7-covered electrode10.1007/s11661-016-3629-x ↗
12. The effects of Mn and Nb on the microstructure and mechanical properties of Alloy 152 welds10.1016/j.matdes.2015.08.100 ↗
13. Effect of aging treatment on mechanical properties in ENiCrFe-7 weld overlay cladding materials10.1016/j.msea.2020.139083 ↗
14. Effect of post-weld heat treatment (PWHT) on microstructure and corrosion behavior in ENiCrFe−7 weld overlay cladding materials10.1016/j.jnucmat.2021.153350 ↗
15. Effect of post-weld heat treatment (PWHT) on the intergranular corrosion of ENiCrFe-7 weld overlay cladding materials10.1016/j.jmrt.2020.05.101 ↗
16. The general corrosion behavior of ENiCrFe-7 weld overlay cladding material in deoxygenated high-temperature and high-pressure water10.1080/00223131.2019.1571453 ↗
17. Effects of PWHT on the microstructure and mechanical properties of ERNiCrFe-7 all-weld metal10.1007/s40194-014-0201-4 ↗
18. Effects of Nb/Cr on the cryogenic impact toughness of the deposited metal of ENiCrFe-910.1016/j.msea.2016.06.067 ↗
19. The microstructure and fracture behavior of the dissimilar alloy 690-SUS 304L joint with various Nb addition10.1007/s11661-003-0129-6 ↗
20. Characterization of weld metal microstructure in a Ni-30Cr alloy with additions of niobium and molybdenum10.1016/j.matchar.2016.03.006 ↗
21. The growth mechanism of grain boundary carbide in Alloy 69010.1016/j.matchar.2013.04.005 ↗
22. The effect of grain boundary misorientation on the intergranular M 23C6 carbide precipitation in thermally treated Alloy 69010.1016/j.jnucmat.2004.07.038 ↗
23. Precipitation of dendritic M23C6 carbides in alloy 690 during continuous cooling10.1016/j.jallcom.2020.156694 ↗
24. Effects of M23C6 on the high-temperature performance of Ni-Based welding material NiCrFe-710.1007/s11661-014-2439-2 ↗
25. The mechanism of ductility dip cracking in nickel-chromium alloys
26. Solidification of Nb-bearing superalloys: Part I. Reaction sequences10.1007/s11661-998-0319-3 ↗
27. Ductility-dip cracking susceptibility of Inconel 690 using Nb content10.1016/j.jallcom.2018.12.208 ↗
28. High temperature behavior of Ni-base weld metal Part I. Ductility and microstructural characterization10.1016/j.msea.2004.03.074 ↗
29. Precipitation and Cr depletion profiles of Inconel 182 during heat treatments and laser surface melting10.1016/j.jmatprotec.2008.02.021 ↗
30. Effect of post-weld heat treatment on the microstructure and tensile properties of electron-beam-welded 21st century nickel-based super alloy 68610.1007/s12046-018-1047-z ↗
31. Investigation on the optimized heat treatment procedure for laser fabricated IN718 alloy10.1016/j.optlastec.2017.06.027 ↗
32. Precipitation behavior of M23C6 carbides and its effect on mechanical properties of Ni-based Alloy 69010.1080/00223131.2020.1797595 ↗
33. The role of alloying elements in the design of nickel-base superalloys10.1007/BF00549796 ↗
34. Precipitation behavior of grain boundary M23C6 and its effect on tensile properties of Ni–Cr–W based superalloy10.1016/j.msea.2012.03.092 ↗
35. Effect of a heat treatment on the precipitation behavior and tensile properties of alloy 690 steam generator tubes10.1016/j.jnucmat.2016.06.038 ↗
36. Microstructure and mechanical properties of thick CLF-1 reduced activation steel weld joint made by electron beam welding joint10.1016/j.fusengdes.2019.111446 ↗
37. Effects of post-weld heat treatment on microstructure and mechanical properties of Hastelloy N superalloy welds10.1016/j.mtcomm.2019.02.004 ↗