journal article·2022-04-01Open access

Annealing-induced hardening of laminated structured nickel fabricated by electrodeposition

Jian Zhang, Yun Lei, Ning Wang, Ping Yang, Xinkun Zhu, Baipo Shu

Materials Research Express· Volume 9· Issue 4

Abstract

Abstract Annealing of deformed metals is considered as a process which necessarily leads to softening, due to the annihilation of lattice defects. However, in laminated materials, annealing at moderate temperatures may induce hardening. In this study, a laminated structure at two sides of the sample is produced by ultrasonic introduced intermittently for 15 min, during the electrodeposition process. For comparison, a sandwich structure is prepared under ultrasonic without interruption at two sides of the sample. All the samples are annealed for 30 min at 373 K, 473 K and 573 K. The common softening after annealing is observed for the sample without laminated structure in the two sides. However, for the other sample that possesses laminated structure in the same area at the two sides, the strength and ductility increase rather than decrease after annealing. The sample that possesses laminated structure in the same area at the two sides annealed at 373 K shows an evident change, which increases in σ 0.2 from 299 to 353 MPa, in σ UTS from 477 to 533 MPa, and in ε ue from 7.6% to 9.5%. According to the XRD results, annealing-induced hardening is not attributable to occurring phase transformation. Detailed microstructural TEM results demonstrate that the annealing-induced hardening is attributed to the surface laminated interfaces and high-density growth twins in interfacial transition zones. In addition, the detwinning occurred during subsequent tensile deformation, also plays a crucial role.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Electrodeposition and Electroless Coatings · Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Enhancement of material properties of titanium alloys through heat treatment process: a brief review10.1016/j.matpr.2019.05.409 ↗
2. The effect of annealing on deformation and fracture of a nanocrystalline fcc metal10.1007/s10853-006-0969-8 ↗
3. Strengthening mechanisms and optimization of structure and properties in a nanostructured IF steel10.1007/s10853-010-4521-5 ↗
4. Hierarchical features infused heterogeneous grain structure for extraordinary strength-ductility synergy10.1080/21663831.2018.1538023 ↗
5. Towards strength-ductility synergy through hierarchical microstructure design in an austenitic stainless steel10.1016/j.scriptamat.2019.05.017 ↗
6. Deformation mechanisms of 304L stainless steel with heterogeneous lamella structure10.1016/j.msea.2018.11.047 ↗
7. Annealing-induced abnormal hardening in a cold rolled CrMnFeCoNi high entropy alloy10.1016/j.scriptamat.2018.11.042 ↗
8. Effect of strain on hardening by annealing and softening by deformation phenomena in ultra-fine grained aluminum10.1007/s10853-008-2809-5 ↗
9. Hardening by annealing and softening by deformation in nanostructured metals10.1126/science.1124268 ↗
10. Work softening and annealing hardening of deformed nanocrystalline nickel10.1063/1.3062849 ↗
11. Annealing-induced hardening in high-pressure torsion processed CoCrNi medium entropy alloy10.1016/j.msea.2018.07.107 ↗
12. Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure10.1016/j.actamat.2018.12.012 ↗
13. Combined effect of isothermal annealing and pre-compression on mechanical properties of Cu36Zr48Al8Ag8 bulk metallic glass10.1016/S1003-6326(16)64270-X ↗
14. Effects of annealing and impurities on tensile properties of electrodeposited nanocrystalline Ni10.1016/j.scriptamat.2004.08.015 ↗
15. Modeling the age-hardening behavior of SiC/Al metal matrix composites10.1007/s11661-006-9064-7 ↗
16. Transformation of fracture mode of an Al-Mg-Si-Cu alloy subject to aging treatment10.1016/j.msea.2018.08.028 ↗
17. Annealing hardening in cryo-rolled high-entropy alloys by belated deformation twinning10.1016/j.msea.2020.140403 ↗
18. Effects of annealing temperature and layer thickness on hardening behavior in cross accumulative roll bonded Cu/Fe nanolamellar composite10.1016/j.jallcom.2020.154312 ↗
19. Increasing the strength of nanocrystalline steels by annealing: Is segregation necessary?10.1016/j.scriptamat.2014.09.023 ↗
20. Strengthening face centered cubic crystals by annealing induced nanotwins10.1038/s41598-017-17848-3 ↗
21. Effect of phosphorus segregation on fracture properties of 2.25Cr-1Mo pressure vessel steel10.1361/105994903770343079 ↗
22. Failure of metals I: brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
23. Influence of P and C intergranular segregation during manufacturing and ageing on the fracture toughness of nuclear pressure vessel steels10.1016/j.mspro.2014.06.108 ↗
24. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
25. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
26. Mechanical properties and optimal grain size distribution profile of gradient grained nickel10.1016/j.actamat.2018.04.065 ↗
27. Detwinning of face-centered cubic deformation twins via the correspondence matrix approach10.1016/j.actamat.2015.09.020 ↗
28. Experimental studies on detwinning of face-centered cubic deformation twins10.1016/j.actamat.2015.11.025 ↗
29. Study of twinning/detwinning behaviors of Ti by interrupted in situ tensile tests10.1016/j.actamat.2014.09.038 ↗