Preparation and corrosion resistance properties of duplex stainless steel (00Cr22Ni6MnMoCu)
Source abstract
Abstract
Abstract In the present paper, a new kind of duplex stainless steel (DSS, 00Cr22Ni6MnMoCu) was prepared. Cr30 was chosen as a comparison of microstructures and mechanical properties with 00Cr22Ni6MnMoCu. Corrosion tests with 3.5% NaCl solution and electrolytic solution for 00Cr22Ni6MnMoCu were carried out to analyze the corrosion pattern of test materials. It can be concluded that: (1) Austenitic and ferrite duplex stainless steel has an optimized phase distribution, high toughness and strength when the ratio of two-phase content is 1:1. (2) Corrosion tests show that the corrosion resistance of 00Cr22Ni6MnMoCu is 12 times compared to ferrite stainless steel Cr30. (3) Electrolytic corrosion tests show that for 00Cr22Ni6MnMoCu, the corrosion is caused by intergranular corrosion. For Cr30, it is mainly caused by pinholes. However, Cr30 has a poor corrosion resistance because of the presence of a large amount of carbides and their phase boundaries caused by the electric potential difference between the carbide and the matrix.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Effect of aging treatments and microstructural evolution on corrosion resistance of tungsten substituted 2205 duplex stainless steel10.1179/026708302225001642 ↗
2. Stress corrosion cracking behaviour of dissimilar welding of AISI 310S austenitic stainless steel to 2304 duplex stainless steel10.3390/met8030195 ↗
3. Comparative study on intergranular corrosion characteristics of cast duplex stainless steel stabilized with zirconium10.1007/s13632-017-0369-2 ↗
4. The weldability of duplex stainless-steel in structural components to withstand corrosive marine environments10.3390/met10111475 ↗
5. Multicomponent phase diagram of lean duplex stainless steel UNS S82441 and its application to evaluate the microstructure in the heat affected zone10.1007/s11669-017-0551-x ↗
6. Local electrical properties of thermally grown oxide films formed on duplex stainless steel surfaces10.1016/j.apsusc.2018.03.047 ↗
7. The metastable pitting corrosion of 2205 duplex stainless steel under bending deformation10.1016/j.jallcom.2020.154422 ↗
8. Pitting corrosion behaviour of 2101 duplex stainless steel in chloride solutions10.1080/1478422X.2017.1394020 ↗
9. Effect of aging on precipitation behavior and pitting corrosion resistance of SAF2906 super duplex stainless steel10.1007/s11665-017-2888-z ↗
10. Effect of microstructural characteristics on mechanical properties of austenitic, ferritic, and γ-α duplex stainless steels10.1007/s11661-018-5083-4 ↗
11. Modeling damage in concrete caused by corrosion of reinforcement: coupled 3D FE model10.1007/s10704-012-9774-3 ↗
12. Microstructure and microtexture changes during solution nitriding to produce austenitic case on ferritic–austenitic duplex stainless steel10.1179/026708399101506869 ↗
13. Intergranular corrosion characteristics of niobium stabilized 27Cr-7Ni-Mo-W-N cast hyper duplex stainless steel10.1016/j.matpr.2019.10.134 ↗
14. The use of X-ray diffraction, microscopy, and magnetic measurements for analysing microstructural features of a duplex stainless steel10.1016/j.matchar.2004.12.009 ↗
15. Long-term corrosion behaviour of stainless reinforcing steel in mortar exposed to chloride environment10.1016/j.corsci.2012.11.035 ↗
16. Thermal aging at 475°C of newly developed lean duplex stainless steel 2404: Mechanical properties and corrosion behavior10.1016/j.corsci.2016.12.014 ↗
17. Corrosion behavior and mechanism of Cr–Mo alloyed steel: Role of ferrite/bainite duplex microstructure10.1016/j.jallcom.2019.151787 ↗
18. Microstructure, mechanical and intergranular corrosion behavior of dissimilar DSS 2205 and ASS 316L shielded metal arc welds10.1007/s12666-016-0878-8 ↗
19. Stress-assisted microbiologically influenced corrosion mechanism of 2205 duplex stainless steel caused by sulfate-reducing bacteria10.1016/j.corsci.2020.108746 ↗
20. Effects of Ti addition on microstructure and the associated corrosion behavior of a 22Cr–5Ni duplex stainless steel10.1002/maco.202012133 ↗
21. Effects of inclusions on the resistance to pitting corrosion of S32205 duplex stainless steel10.1002/maco.201709723 ↗