Synthesis of WS2/CNT hybrid nanoparticles for fabrication of hybrid aluminum matrix nanocomposite
Source abstract
Abstract
Abstract In this study, a simple, safe and cost-effective method was developed for fabricating the tungsten disulfide/carbon nanotube (WS2/CNT) hybrid nanoparticles via chemical vapor deposition (CVD) process. Hybrid nanoparticles used for reinforcing the aluminum matrix. The hybrid nanocomposites were prepared by powder metallurgy processing and consolidated by the Hot-Pressing process. The chemical composition and morphology of the WS2/CNT hybrid particles were studied by x-ray diffraction (XRD), filed emission scanning electron microscopy (FESEM), Raman spectra, Fourier-transform infrared spectroscopy (FTIR) and thermo gravimetric analysis (TGA). The results proved that the uniform, pure and tubular WS2/ CNT hybrid nanoparticles were produced and WS2 nanoparticles were decorated the CNT surface successfully. Optical microscopy (OM) and FESEM used for characterization of the microstructure of hybrid nanocomposite, indicate a good distribution of hybrid nanoparticles in the aluminum matrix. Maximum values of relative density, hardness and compressive strength were measured for sample with WS2/CNT ratio of 1:1. A relative density of more than 99.5% was obtained for this sample. Hardness and compressive strength were improved by 43% and 60% compared with pure aluminum respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Evaluation of mechanical and wear properties of hybrid aluminum matrix composites10.1016/S1003-6326(13)62762-4 ↗
2. Aluminum matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics10.1016/j.jmrt.2015.05.003 ↗
3. Nano and hybrid aluminum-based metal matrix composites: an overview10.1051/mfreview/2015018 ↗
4. Self-lubricating aluminum metal-matrix composites
5. Mechanical and microstructure properties of Al/CNT-Al2O3 hybrid nanocomposite produced by accumulative roll bonding process10.22052/JNS.2019.01.10 ↗
6. Fabrication Al6061/CNT nanocomposite and investigation of wear property in
7. Self-lubricating aluminum matrix composites reinforced with 2D crystals10.1016/j.compositesb.2016.11.054 ↗
8. Advanced AZ31 Mg alloy composites reinforced by WS2 nanotubes10.1016/j.jallcom.2015.09.066 ↗
9. Mechanical behavior enhancement of AZ31/WS2 and AZ61/WS2 magnesium metal matrix nanocomposites10.1177/1687814017753442 ↗
10. Comparative study of mechanical and wear behavior of Cu/WS2 composites fabricated by spark plasma sintering and hot-pressing10.1016/j.jmst.2017.06.014 ↗
11. Effect of WS2 addition on tribological behavior of aluminum at room and elevated temperatures10.1007/s11249-017-0856-2 ↗
12. Self-lubricating Al-WS2 composites for efficient and greener tribological parts10.1038/s41598-017-15297-6 ↗
13. Carbon nanotube hybrids with MoS2 and WS2 synthesized with control of crystal structure and morphology10.1016/j.carbon.2014.12.090 ↗
14. Tungsten disulfide-multiwalled carbon nanotube hybrid anode for lithium-ion battery10.1166/jnn.2014.8737 ↗
15. Glucose aided preparation of tungsten sulfide/multi-wall carbon nanotube hybrid and use as counter electrode in dye-sensitized solar cells10.1021/am301397e ↗
16. Helical microtubules of graphitic10.1038/354056a0 ↗
17. Polyhedral and cylindrical structures of tungsten disulfide10.1038/360444a0 ↗
18. Synthesis of bulk WS2 nanotube phases10.1007/s100190050140 ↗
19. Study of the growth mechanism of WS2 nanotubes produced by a fluidized bed reactor10.1039/b310609h ↗
20. Facile large-scale synthesis of WS2 nanotubes from WO3 nanorods prepared by a hydrothermal route10.1016/j.solidstatesciences.2004.10.006 ↗
21. Synthesis of inorganic fullerene-like WS2 nanoparticles and their lubricating performance10.1088/0957-4484/17/5/058 ↗
22. Synthesis of WS2 nanostructures from the reaction on of WO3 with CS2 and mechanical characterization of WS2 nanotube composites10.1088/0957-4484/22/28/285714 ↗
23. Effect of suitable surfactant on the large-scale preparation of WO3 nanorods for the synthesis of WS2 nanoparticles10.1166/jnn.2010.2572 ↗
24. Synthesis and characterization of WS2 nanotubes10.1021/cm020471f ↗
25. Synthesis of WS2 nanosheets by a novel mechanical activation method10.1016/j.matlet.2010.01.040 ↗
26. Hydrothermal synthesis of variety low dimensional WS2 nanostructures10.1016/j.matlet.2014.05.013 ↗
27. High pressure x-ray diffraction study of tungsten disulfide10.1016/j.jpcs.2006.05.008 ↗
28. Unique nucleation activity of inorganic fullerene-like WS2 nanoparticles in polyphenylene sulfide nanocomposites: Isokinetic and is conversional study of dynamic crystallization kinetics10.1021/jp9008515 ↗
29. Continuous production of IF-WS2 nanoparticles by a rotary process10.3390/inorganics2020313 ↗
30. Standard test methods for density of compacted or sintered
31. ASTM E384-99 · 1999
32. ASTM E9-09 · 2009
33. Optical properties of MS2 (M = Mo, W) inorganic fullerene-like and nanotube material optical absorption and resonance Raman measurements10.1557/JMR.1998.0335 ↗
34. Raman scattering of the MoS2 and WS2 single nanotubes10.1016/j.susc.2006.12.050 ↗
35. Diameter dependent Raman scattering of WS2 nanotubes10.1002/pssb.200982275 ↗
36. Geng · Determining Carbon Nanotube Properties from Raman Scattering Measurements.
37. Multiwalled carbon nanotubes coated with tungsten disulfide10.1021/cm011282k ↗
38. Inorganic fullerene-type WS2 nanoparticles: processing, characterization and its photocatalytic performance on malachite green10.1007/s00339-017-0965-7 ↗
39. Sonochemical synthesis of WS2 nanosheets and its application in sonocatalytic removal of organic dyes from water solution10.1016/j.ultsonch.2018.06.003 ↗
40. Selective hydrothermally synthesis of hexagonal WS2 platelets and their photo catalytic performance under visible light irradiation10.1016/j.spmi.2016.03.042 ↗
41. Multiple functionalization of tungsten disulfide inorganic nanotubes by covalently grafted conductive polythiophenes10.1039/C6RA19628D ↗
42. Hampton · 2010
43. Evaluating the characteristics of multiwall carbon nanotubes10.1016/j.carbon.2011.03.028 ↗
44. Characterization of multi-walled carbon nanotubes functionalized by a mixture of HNO3/H2SO410.1016/j.diamond.2018.08.008 ↗
45. Synthesis and characterization of multi walled carbon nanotubes (MWCNT)10.1080/01430750.2018.1472657 ↗
46. Thermogravimetric analysis of the oxidation of multiwalled carbon nanotubes: evidence for the role of defect sites in carbon nanotube chemistry10.1021/nl020297u ↗
47. Investigation of microstructure and mechanical properties of Al2024-CNT nanocomposite produced by flake powder metallurgy process
48. Investigation of mechanical and tribological properties of aluminum reinforced with tungsten disulfide (WS2) nanoparticles10.1088/2053-1591/aafa00 ↗
49. Carbon nanotube reinforced aluminum matrix composites produced by spark plasma sintering10.1007/s10853-017-1086-6 ↗
50. Effect of alternative aging process on the fracture and interfacial properties of particulate Al2O3–reinforced Al (6061) metal matrix composite10.1007/s11661-002-0179-1 ↗
51. Synthesis of aluminum- CNTs composites using double-pressing double-sintering method (DPDS)
52. Recycling of automotive aluminum10.1016/S1003-6326(09)60417-9 ↗
53. Investigation of the microstructure and hardness of cast AA7068 nanocomposite reinforced with SiC nanoparticles In Persian
54. Effect of reinforcement concentration on the properties of hot extruded Al-Al2O3 composites synthesized through microwave sintering process10.1016/j.msea.2017.04.064 ↗
55. Strengthening in carbon nanotube/aluminum (CNT/Al)10.1016/j.scriptamat.2005.07.022 ↗
56. Dual strengthening mechanisms induced by carbon nanotubes in roll bonded aluminum composites10.1016/j.msea.2009.06.006 ↗
57. Microstructure and mechanical properties of Al matrix nanocomposites reinforced by different amounts of CNT and SiCW10.1016/j.compositesb.2019.107081 ↗
58. Thermal conductivity of monolayer MoS2, MoSe2, and WS2: interplay of mass effect, interatomic bonding and anharmonicity10.1039/C5RA19747C ↗
59. Coefficient of thermal expansion of carbon nanotubes measured by Raman spectroscopy10.1063/1.4864056 ↗
60. Strengthening mechanisms in particulate metal matrix composites10.1016/0956-716X(91)90349-6 ↗
61. Deformation and strengthening mechanisms of a carbon nanotube reinforced aluminum composite10.1016/j.carbon.2016.03.038 ↗
62. Investigation of nanostructured Al/Al2O3 composite produced by accumulative roll bonding process10.1016/j.matdes.2011.09.040 ↗