journal article·2023-09-01Open access

Enhancing the damping effect of MRF damper using an external magnetic excitation system

Yousif Badri, Amir Alhams, Sadok Sassi, Mohammed Hussein, Jamil Renno

Materials Research Express· Volume 10· Issue 9

Abstract

Abstract The magnetic field generated by the damper’s magnetic circuit governs the yield stress value of the Magnetroholgical Fluid (MRF) damper and hence its damping effect. This paper contributes to the literature on the development of MRF dampers by introducing a new design feature to improve the damper’s performance. The presented novel feature tends to amplify the magnetic field value and concentrate its flux within the MR fluid region. The excitation sources consist of 12 coils placed in radial directions surrounding the MRF to focus the energizing magnetic effects. However, the search for efficient solutions is not only focused on generating more energy but also on minimizing its loss. Therefore, a metallic ring was placed around the coils to close the magnetic circuit, guide the flux lines, and avoid any energy dispersion to the surrounding air. As a proof of concept, two materials were tested for the surrounding ring: plastic acrylonitrile butadiene styrene (ABS) and mild steel. The performance of both solutions was assessed experimentally with a Gaussmeter and numerically by using a model developed via COMSOL Multiphysics. Both techniques confirmed the efficiency of the solution based on a steel ring in preventing the flux dispersion into the surrounding air. In addition, an increase of the excitation current from 0 to 5A was found to elevate the magnetic field by 35%, compared with the ABS ring. In the second step, a test rig was designed and built to investigate the damping efficiency of the MRF experimentally. The testing apparatus consisted of a sliding-bearing mechanism connected to a variable speed motor. The damping effect was assessed based on the force and displacement data provided by a linear variable displacement transducer (LVDT) and a force cell. Damping forces were observed at a constant frequency of 0.36 Hz (22 rpm) when the testing system and the attached damper were functioning smoothly away from its resonant frequency. Moreover, the magnetic field excitation current was elevated from 0 A to 5 A with a 1 A step. Again, the metallic ring was found to produce a 112% greater damping coefficient than the case of the plastic ring when the excitation current reached 5A.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Vibration Control and Rheological Fluids · Seismic Performance and Analysis · Geophysics and Sensor Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. An experimental and numerical investigation of the combination of different damper types for improved control of vibration
2. Experimental and numerical investigation of damping in a hybrid automotive damper combining viscous and multiple-impact mechanisms10.1177/10775463211038125 ↗
3. Numerical study on the damping characteristics of a shock absorber valve utilizing different velocities through CFD analysis10.7712/120121.8791.18767 ↗
4. Investigating the characteristics of a magneto-rheological fluid damper through CFD modeling10.1088/2053-1591/abfcf6 ↗
5. Characterization analysis of a MR damper10.1088/0964-1726/23/4/045025 ↗
6. Physical characteristics of magneto-rheological suspensions and their applications10.1016/j.jiec.2012.10.008 ↗
7. Analysis of the magnetic field for MR damper working in shear mode10.1504/IJSTRUCTE.2016.073678 ↗
8. 2022
9. AC/DC Module User’s Guide
10. Characteristics, optimal design, and performance analyses of MRF damper10.1155/2018/6454932 ↗
11. Magnetorheological fluids: a review10.1039/c0sm01221a ↗
12. Gołdasz · 201510.1007/978-3-319-13233-4 ↗
13. Test and simulation the failure characteristics of twin tube shock absorber10.1016/j.ymssp.2018.12.052 ↗
14. An approach for characterizing twin-tube shear-mode magneto-rheological damper through coupled FE and CFD analysis
15. A novel magneto-rheological damper based parallel planar manipulator design10.1088/0964-1726/19/5/055028 ↗
16. Theoretical and experimental evaluation of the flow behavior of a magnetorheological damper using an extremely bimodal magnetic fluid10.1088/0964-1726/23/8/085028 ↗
17. Properties and applications of commercial magnetorheological fluids10.1177/1045389X9901000102 ↗
18. The simulation and optimization of the magnetic circuit for magnetorheological damper10.35840/2631-5068/6516 ↗
19. Modelling and analysis of a magneto-rheological damper with nonmagnetized passages in piston and minor losses
20. Earthquake response of elastic SDF systems with non-linear fluid viscous dampers10.1002/eqe.179 ↗
21. Performance Analysis of Magnetorheological Damper with Folded Resistance Gaps and Bending Magnetic Circuit10.3390/act11060165 ↗
22. MRF-132DG Magneto-Rheological Fluid
23. Metered · 2010
24. Optimal design of a vehicle magnetorheological damper considering the damping force and dynamic range10.1088/0964-1726/18/1/015013 ↗
25. Optimal design of magnetorheological valves via a finite element method considering control energy and a time constant10.1088/0964-1726/17/2/025024 ↗
26. Geometry optimization of MR valves constrained in a specific volume using the finite element method10.1088/0964-1726/16/6/027 ↗
27. Design and application of magnetorheological fluid10.1016/j.matdes.2006.10.009 ↗
28. Analysis of magnetic flux in magneto-rheological damper10.1088/2399-6528/ab33d7 ↗
29. A review of advances in magnetorheological dampers: their design optimization and applications10.1631/jzus.A1600721 ↗
30. Magneto-rheological damper with external excitation for more efficient control of vehicles’ dynamics10.1177/1045389X18781038 ↗
31. Semi-active suspension systems from research to mass-market—a review10.1177/1461348419876392 ↗
32. 2012
33. Ferrofluids and magneto-rheological fluids10.4028/www.scientific.net/AST.54.127 ↗
34. Design and evaluation of an MRF damper for semi-active vibration control of the machining processes10.1088/1748-0221/17/12/P12017 ↗
35. Magnetic circuit design and Multiphysics analysis of a novel MR damper for applications under high velocity10.1155/2014/402501 ↗
36. Magneto-rheological fluid dampers: a review on structure design and analysis10.1177/1045389X12436735 ↗