Slurry erosion behavior of hydro-turbine steel treated cryogenically at different soaking periods
Source abstract
Abstract
Abstract The influence of deep cryogenic treatment on the erosive wear performance of Stainless Steel-316L (SS-316L) used in hydropower plants is studied. For this purpose, several SS-316L samples were held at deep cryogenic temperatures (−196 °C) for different soaking periods (12, 24, 36 h). The erosive wear tests were conducted on a self-fabricated slurry erosion test rig and the same was evaluated by weighing the cumulative mass loss (CML) of samples for every 30 min post erosion. From experimental analysis, it was found that the erosive wear was found to be minimum and the hardness reaches to maximum value after 24 h of the soaking period which could be attributed to the significant microstructural changes such as the transformation of γ-austenite phase into (δ-ferrite+α′-martensite) along with precipitation of numerous carbides after deep cryogenic treatments.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Erosion and Abrasive Machining · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Characterization and accelerated erosion testing of WC-Co-Cr- and CoNiCrAlY-Coated CA6NM turbine steel10.1007/s11666-019-00897-7 ↗
2. Slurry erosion mechanism of hydroturbine steel: effect of operating parameters10.1007/s11249-013-0213-z ↗
3. Effect of cryogenic treatment on AISI M2 high speed steel: metallurgical and mechanical characterization10.1007/s11665-011-0032-z ↗
4. Comparative study of conventional and deep cryogenic treatment of AISI M3:2 (EN 1.3395) high-speed steel10.1016/j.jmrt.2020.09.071 ↗
5. Cryogenic treatment deep cryogenic treatment of tool steels: a review10.1179/174951508X446367 ↗
6. Effect of cryogenic treatment on distribution of residual stress in case carburized En 353 steel10.1016/j.msea.2007.07.035 ↗
7. Improved wear resistance of steels by cryotreatment: the current state of understanding10.1080/02670836.2016.1206292 ↗
8. Deep cryogenic treatment of En 31 and En 8 steel for the development of wear resistance
9. Influence of deep cryogenic treatment on hardness and toughness of En31 steel10.1080/2374068X.2018.1530426 ↗
10. Effect of deep-cryogenic treatment on high speed steel properties10.1080/10426910902809743 ↗
11. Effect of cryogenic treatment on microstructure and wear characteristics of AISI M35 HSS10.11648/j.ijmsa.20130202.14 ↗
12. The influence of deep cryogenic treatment on the properties of high-vanadium alloy steel10.1016/j.msea.2016.03.039 ↗
13. A research review on deep cryogenic treatment of steels10.1504/IJMSI.2014.064784 ↗
14. Deep cryogenic treatment improves wear resistance of en 31 steel10.1080/10426910801938098 ↗
15. Optimization of deep cryogenic treatment to reduce wear loss of 4140 steel10.1080/10426914.2011.593237 ↗
16. Effects of cryogenic treatments on mechanical properties and wear behaviour of high-speed steel M210.1179/174951508X446394 ↗
17. Deep cryogenic treatment of plain-carbon and low-alloy steels10.1520/MPC20200026 ↗
18. Influence of shallow and deep cryogenic treatment on the residual state of stress of 4140 steel10.1016/j.jmatprotec.2010.10.018 ↗
19. Comparison of effects of cryogenic Treatment on different types of steels: a review
20. Microstructural evolution in 316LN austenitic stainless steel during solidification process under different cooling rates10.1007/s10853-015-9565-0 ↗
21. Influence of cryogenic treatments on the wear behavior of AISI 420 martensitic stainless steel10.1007/s11665-017-2986-y ↗
22. One-step model of the face-centred-cubic to body-centred-cubic martensitic transformation10.1107/S0108767313019016 ↗
23. A review on the cryogenic treatment of stainless steels
24. Effect of cryogenic treatment on the mechanical properties of 4340 steel10.1016/j.jmatprotec.2006.12.046 ↗
25. Upadhyay · 2019 · SS316
26. Deep cryogenic treatment of AISI 302 stainless steel: II. Fatigue and corrosion10.1016/j.matdes.2010.05.015 ↗
27. Steel transformations10.1016/B978-0-08-098204-5.00012-2 ↗
28. Case study of the tensile fracture investigation of additive manufactured austenitic stainless steels treated at cryogenic conditions10.3390/ma13153328 ↗
29. Deterioration in fracture toughness of 304LN austenitic stainless steel due to sensitization10.1007/s11661-009-0023-y ↗
30. Hedström · 2007
31. Methods of improvement of mechanical and tribological properties of the surface of ss 316l: a review
32. Deformation-induced martensite in austenitic stainless steels: a review10.1007/s43452-020-00130-1 ↗
33. Phase transformation in 316L austenitic steel induced by fracture at cryogenic temperatures: experiment and modelling10.3390/ma14010127 ↗
34. Slurry erosion response of heat treated 13cr-4ni martensitic stainless steel10.4028/www.scientific.net/MSF.710.500 ↗
35. On the mechanism of wear resistance enhancement of tool steels by deep cryogenic treatment10.1080/09500839.2012.669052 ↗
36. Delta ferrite and martensite formation in stainless steels
37. Al · Mössbauer Spectra of MnFe · 2010 · 4 · 1129
38. Deformation induced martensitic transformation of metastable stainless steel AISI 301
39. Martensite formation during incremental cooling of Fe–Cr–Ni alloys: an in situ bulk x-ray study of the grain-averaged and single-grain behavior10.1016/j.scriptamat.2017.04.020 ↗
40. The effects of cryogenic treatment on cutting tools10.1088/1757-899X/225/1/012104 ↗
41. The effect of deep cryogenic treatment on microstructure and wear behavior of H11 tool steel10.1134/S0031918X19090035 ↗
42. Effect of deep cryogenic treatment on wear resistance of AISI 52100 bearing steel10.1007/s12666-014-0417-4 ↗
43. Effect of deep cryogenic treatment on the formation of nano-sized carbides and the wear behavior of D2 tool steel10.1007/s12613-012-0630-2 ↗
44. Amini · 2010
45. Characterization and optimization of slurry erosion behavior of SS 316 at room temperature10.1007/s12666-020-02169-3 ↗
46. Slurry erosion behavior of HVOF-sprayed WC-10Co-4Cr coated SS 316 steel with and without PTFE modification10.1007/s11666-019-00903-y ↗
47. Heat treater ’ s guide: practices and procedures for ferrous alloys
48. Experimental Investigations on slurry erosion behaviour of HVOF and HVOLF sprayed coatings on hydraulic turbine steel10.1007/s12666-016-0956-y ↗
49. Experimental investigation of slurry erosion behaviour of hard faced AISI 316L stainless steel10.13189/ujme.2015.030204 ↗
50. Slurry erosion—design of test devices10.1515/adms-2017-0007 ↗
51. Slurry erosion behaviour of HVOF sprayed WC-10Co-4Cr and Al2O3 + 13TiO2 coatings on a turbine steel10.1016/j.wear.2012.04.016 ↗
52. Parametric study of slurry-erosion of hydroturbine steels with and without detonation gun spray coatings using taguchi technique10.1007/s11661-012-1148-y ↗
53. Grewal · 2013 · 52 · 287
54. Experimental investigations of mechanical properties and slurry erosion behaviour of high velocity oxy fuel and plasma sprayed Cr2O3–50%Al2O3 coatings on CA6NM turbine steel under hydro accelerated conditions10.1080/17515831.2018.1452369 ↗
55. Slurry erosion performance of Ni-Al2O3 based thermal-sprayed coatings: Effect of angle of impingement10.1007/s11666-013-0013-x ↗
56. Observations of the advancing δ -ferrite/γ -austenite/liquid interface during the peritectic reaction10.1007/s10853-005-1967-y ↗
57. The reinforcement role of deep cryogenic treatment on the strength and toughness of alloy structural steel10.1016/j.msea.2019.138698 ↗
58. Abrasive wear behavior of cryogenically treated boron steel (30MnCrB4) used for rotavator blades10.3390/ma13020436 ↗
59. Effect of cryogenic treatment on microstructure and wear resistance of carburized 20CrNi2MoV steel10.3390/met8100808 ↗
60. Influence of deep cryogenic treatment and secondary tempering on microstructure and mechanical properties of medium-carbon low-alloy steels10.1007/s11665-019-04532-y ↗
61. Cryogenic heat treatment of the ferrous materials—a review of the current state10.1051/metal/2016049 ↗
62. Deep cryogenic treatment of tool steels10.1016/j.jmatprotec.2015.09.045 ↗
63. Detection and estimation of retained austenite in a high strength Si-bearing bainite-martensite-retained austenite micro-composite steel after quenching and bainitic holding (Q&B)
64. Tribological and mechanical properties of deep cryogenically treated medium carbon micro alloy steel10.1007/s12540-017-6715-8 ↗
65. Influence of different cryogenic treatments on high-temperature wear behavior of M2 steel10.1016/j.wear.2016.11.041 ↗
66. Effect of deep cryogenic treatment on the carbide precipitation and tribological behavior of D2 steel10.1080/10426910701235934 ↗
67. On the Optimization of microstructure and mechanical properties of CrWMn tool steel by deep cryogenic treatment10.1002/srin.201800523 ↗
68. Effectiveness of deep cryogenic treatment on carbide precipitation10.1016/j.jmrt.2020.09.063 ↗
69. Slurry jet erosion performance of high-velocity flame-sprayed nano mixed Ni-40Al 2 O 3 coating in aggressive environment10.1177/1350650118822426 ↗
70. Effect of impact angle on the slurry erosion-corrosion of 304L stainless steel10.1016/S0043-1648(00)00344-6 ↗
71. Study the effect of impact angle on slurry erosion wear of four different ductile materials10.1016/j.matpr.2017.11.428 ↗
72. Slurry erosion performance of high-velocity flame-sprayed Ni-20Al2O3 and Ni-10Al2O3-10TiO2 coatings under accelerated conditions10.1007/s11666-017-0598-6 ↗
73. HVOF-coatings against high temperature erosion (∼300 °C) by coal fly ash in thermoelectric power plant10.1016/j.matdes.2004.10.008 ↗
74. Slurry erosion studies on surface modified 13Cr-4Ni steels: Effect of angle of impingement and particle size10.1007/s11665-007-9068-5 ↗
75. Grewal · 2012