Secondary ignition of carbon-based bridge coating triggered by low voltage
Source abstract
Abstract
Abstract With the goal of reducing ignition voltage, a new type of carbon-based bridge coating (CBBC) was prepared, and its ignition performance was investigated. The size of the bridge area with the lowest ignition voltage was determined, and a secondary ignition phenomenon that occurred during the experiment was analyzed. Self-made conductive carbon paste was printed on the Al2O3substrate by a screen printing process, and the ignition bridge was shaped using laser etching technology. Both ends of the CBBC were coated with conductive silver paste and lead on their electrodes. A stabilized DC power supply was used for the ignition experiment. The ignition performance of the CBBCs under different bridge sizes was measured, and scanning electron microscopy (SEM) characterization and analysis were performed on the surface of the ignition bridge area before and after the experiment. The CBBCs with a bridge area size of 300 × 300μm could be ignited at or under 24 V, and only part of the CBBCs could be triggered when the bridge area size was 500 × 500μm. Further, the ignition voltage may have been influenced by the poor uniformity of the coating thickness. Overall, the results demonstrate the following: (1) The CBBCs prepared in this experiment could be fully ignited at a voltage of 24 V, (2) a bridge size of 300 × 300μm could ensure stable ignition with low voltage, and (3) the tip discharge caused by the first fuse of the CBBCs was the root cause of the secondary ignition.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Energetic Materials and Combustion · Combustion and Detonation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. An analysis of the initiation process of electro-explosive devices10.5028/jatm.2012.04015211 ↗
2. Layered Al/CuO thin films for tunable ignition and actuations10.3390/nano10102009 ↗
3. Micro-propulsion based on vacuum arcs featured10.1063/1.5081096 ↗
4. Recent technical developments in high-voltage and high-power vacuum circuit breakers10.1109/27.41188 ↗
5. Characterization of vacuum arc thruster performance in weak magnetic nozzle10.3390/aerospace7060082 ↗
6. Micropatterning of nanoenergetic films of Bi2O3/Al for pyrotechnics10.1039/C4RA15476B ↗
7. Two-dimensional modelling for the current density distribution in a heavily doped semiconductor resistor10.1080/002072197136237 ↗
8. Energetic igniters realized by integrating Al/CuO reactive multilayer films with Cr films10.1063/1.3646489 ↗
9. Influence of Al/CuO reactive multilayer films additives on exploding foil initiator10.1063/1.3658617 ↗
10. Ignition characteristics of energetic nichrome bridge initiator based on Al/CuO reactive multilayer films under capacitor discharge and constant current conditions10.1016/j.sna.2020.112200 ↗
11. Numerical simulation of the metal bridge foil explosion plasma ignition of B/KNO310.1063/1.5127990 ↗
12. Modelling of the current density distribution in a heavily doped semiconductor bridge10.1080/002072196137066 ↗
13. Temperature distribution and discharge modeling of a semiconductor bridge10.1109/TPS.2011.2173504 ↗
14. Research progress in energy conversion components for MEMS initiating explosive device10.1088/1742-6596/986/1/012004 ↗
15. Characteristics of plasma generated by polysilicon semiconductor bridge (SCB)10.1016/S0924-4247(01)00836-6 ↗
16. Comparison of plasma generation behaviors between a single crystal semiconductor bridge (single-SCB) and a polysilicon semiconductor bridge (poly-SCB)10.1016/j.sna.2004.04.038 ↗
17. Thermal and electrical conductivity of melt mixed polycarbonate hybrid composites co-filled with multi-walled carbon nanotubes and graphene nanoplatelets10.1002/app.42536 ↗
18. CuO/Al thermites for solid rocket motor ignition10.2514/1.B34771 ↗
19. Research on the ignition performances of the titanium composite SCB10.4028/www.scientific.net/AMR.893.320 ↗
20. Metal–interlayer–metal structured initiator containing Al/CuO reactive multilayer films that exhibits improved ignition properties10.1016/j.sna.2019.04.019 ↗
21. Highly energetic compositions based on functionalized carbon nanomaterials10.1039/C5NR07855E ↗
22. Maxwell-wagner effect applied to microwave-induced self-ignition: a novel approach for carbon-based materials10.1021/acs.analchem.7b03731 ↗
23. Effect of carbon-based nanoparticles on the ignition, combustion and flame characteristics of crude oil droplets10.1016/j.energy.2020.117227 ↗
24. Evaporation rate of colloidal droplets of jet fuel and carbon-based nanoparticles: effect of thermal conductivity10.3390/nano9091297 ↗
25. Study on firing reliability of graphite-like film ignition bridge
26. Fabrication and electro-explosive performance of carbon nanotube energetic igniter
27. Study on the performance of carbon film ignition bridge
28. Studies on graphite based conductive paint coatings10.1016/j.porgcoat.2005.09.001 ↗