Improvement of the nylon (N)-glass fiber (G) reinforced polyester composite properties by varying oxide ceramic particles and stacking sequences of N and G
Source abstract
Abstract
Abstract This study investigated the mechanical and physical properties of hybrid composites made with nylon fiber mesh (N), woven glass fiber (G), and unsaturated polyester (UPE) resin filled with different oxide ceramic particles (CPs) (ZnO, Al2O3, ZrO2, and TiO2). The influence of the stacking order of N and G (GGNNGG, GNGGNG, NGGGGN, and NNGGGG) on the mechanical properties of the composites was also studied. The goals of this study are to determine the best CP and stacking sequence for enhancing composite properties (flexural and impact properties) and reducing water absorption. The composites were manufactured in two steps using hand lay-up and press molding techniques. The first step involved fabricating N/G/UPE-2%CPs composites with a ratio of 8:14:78 (vol%) and a GNGGNG stacking sequence, referred to as type 1. In the second step, a composite with optimum properties obtained from type 1 was used as a reference and compared to composites with three different stacking sequences of GGNNGG, NGGGGN, and NNGGGG, known as type 2. The three-point bending, Charpy impact, and water absorption tests were conducted. The results revealed that the mechanical properties of N/G/UPE-2Al2O3 and N/G/UPE-2ZnO composites are nearly identical and higher than the others. However, N/G/UPE-2Al2O3′s water absorption is lower than that of N/G/UPE-2ZnO. These results suggest that the N/G/UPE-2Al2O3 composite, with a GGNNGG stacking pattern and a flexural strength of 125.12 MPa, an impact strength of 84.2 kJ m−2, and a low water absorption of 0.56%, could potentially serve as biomaterials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Tribology and Wear Analysis · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Review of fundamentals and applications of polyester nanocomposites filled with carbonaceous nanofillers10.1177/8756087918783827 ↗
2. Special features of polyester-based materials for medical applications10.3390/polym14050951 ↗
3. Unsaturated polyester resin for speciality applications
4. The potential of unsaturated polyesters in biomedicine and tissue engineering: synthesis, structure-properties relationships and additive manufacturing10.1016/j.progpolymsci.2016.12.008 ↗
5. Fibre reinforced organic rectorite/unsaturated polyester composites10.1016/j.compscitech.2007.01.013 ↗
6. Fabrication and characterization of a bioscaffold using hydroxyapatite and unsaturated polyester resin10.1021/acsomega.3c09599 ↗
7. Characterization of nylon fiber mesh/HAP/PMMA micro-hybrid composite for alternative mouthguard material
8. Mechanical characteristics of micro and nano silica, ZnO and chitin powder filled unsaturated polyester composites10.17485/ijst/2016/v9iS1/108471 ↗
9. Influence of selected submicron inorganic particles on mechanical and thermo-mechanical properties of unsaturated polyester/glass composites10.1177/0731684414521513 ↗
10. Effect of Al2O3 particles on mechanical properties of vinylester composite material
11. Wear and mechanical properties of Nylon 66-Al2O3 microcomposite10.1177/0731684417706107 ↗
12. Mechanical and thermal properties of nano-Al2O3/Nylon 6 composites10.1080/00986440903088892 ↗
13. Corrosion resistance and long-term antibacterial performance of ZnO-Al2O3 nanocomposite coatings on aluminum alloy10.1016/j.coco.2024.102110 ↗
14. Exploring the Impact of Ceramic Reinforcements on the Mechanical Properties of Wound Dressings and Drug Release
15. Effects of nano-sized particles on mechanical properties of resin dental composites: a review article
16. An overview of titanium dioxide effect on mechanical properties of PMMA-TiO2 nanocomposites
17. The influence of the inter-ply hybridisation on the mechanical performance of composite laminates: experimental and numerical analysis10.1177/00368504211023285 ↗
18. Hybridization effect on interlaminar bond strength, flexural properties, and hardness of carbon-flax fiber thermoplastic bio-composites10.3390/polym15244619 ↗
19. The role of silica in improving the properties of kenaf/silica/epoxy hybrid composites
20. Effects of coating with different ceromers on the impact strength, transverse strength and elastic modulus of polymethyl methacrylate10.4012/dmj.2014-203 ↗
21. Unsaturated polyester resin nanocomposites containing ZnO modified with oleic acid activated by N, N’-carbonyldiimidazole10.3390/polym10040362 ↗
22. Hydrogen bonds between the oxygen-containing functional groups of biochar and organic contaminants significantly enhance sorption affinity10.1016/j.cej.2024.156654 ↗
23. Hydrogen bond design principles10.1002/wcms.1477 ↗
24. Characterization of the properties of bio-CaCO3 waste eggshell and abaca fiber reinforced hybrid composites10.4028/p-n61z06 ↗
25. Sessile droplet contact angle of water-Al2O3, water-TiO2 and water-Cu nanofluids10.1016/j.expthermflusci.2014.06.004 ↗
26. The effects of nano-zinc oxide morphology on functional and antibacterial properties of tapioca starch bionanocomposite10.1002/fsn3.2426 ↗
27. Optical, electronic, and structural properties of different nanostructured ZnO morphologies10.1140/epjp/s13360-022-02967-2 ↗
28. Laser treatment of zirconia surface for improved surface hydrophobicity10.1016/j.jallcom.2014.11.069 ↗
29. Enhanced hydrophilicity and tribological behavior of dental zirconia ceramics based on picosecond laser surface texturing10.1016/j.ceramint.2019.11.210 ↗
30. The impact of adding nano zirconium dioxide fillers on color change, water sorption and solubility for denture liners10.17214/gaziaot.939246 ↗
31. Flexural, impact and max. shear stress properties of fibers composite for prosthetic socket10.1016/j.matpr.2021.12.368 ↗
32. The adding influence of natural nano powder to unsaturated polyester as a green composite for prosthetic socket application
33. Fabrication and characterization of natural fiber-polymer composites for prosthesis socket application10.1080/15440478.2024.2354399 ↗
34. Study of abaca/carbon/epoxy hybrid composite properties as an alternative prosthetic socket material10.4028/p-8JitL7 ↗
35. Materials for lower limb prosthetic and orthotic interfaces and sockets: evolution and associated skin problems10.15446/revfacmed.v67n1.64470 ↗
36. ZnO size and shape effect on antibacterial activity and cytotoxicity profile10.1038/s41598-022-12134-3 ↗
37. Effect of aluminium oxide nano-and microparticles on the functional groups of microorganisms of activated sludge10.5004/dwt.2020.25770 ↗
38. Antimicrobial activity of zirconium oxide nanoparticles prepared by the sol-gel method
39. Antimicrobial activity of Titanium dioxide and Zinc oxide nanoparticles supported in 4A zeolite and evaluation the morphological characteristic10.1038/s41598-019-54025-0 ↗