journal article·2024-08-01Open access

Investigation on the microstructure and mechanical properties of large-tube forging manufactured by additive forging

Bing Wang, Hong-Lin Zhang, Bin Xu, Ming-Yue Sun, Dian-Zhong Li

Materials Research Express· Volume 11· Issue 8

Abstract

Abstract Large-tube forgings were formed using nine layers of continuous-casting billet made from 15CrNi3MoV alloy steel via additive forging. The interfacial microstructural evolution under different hot-compression bonding temperatures and strains was investigated using optical microscopy, scanning electron microscopy, and electron backscatter diffraction. The tensile properties of the hot-compression-bonded and tube-forged samples were also evaluated. The results showed that as the hot-compression bonding temperature and strain increased, the bonding interface gradually disappeared and the voids at the bonding interface closed. Finally, the interface was replaced with recrystallised grains. The tensile properties of the hot-compression-bonded samples at different temperatures and strains were identical. The tensile properties of the interface and base samples of the tube forging were comparable, and the fracture morphologies were consistent. The fracture position of the large tensile sample with a length of 1000 mm containing three original interfaces is the base, indicating the complete metallurgical bonding of the forging.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Interfacial evolution and mechanical behavior of explosively welded titanium/steel joint under subsequent heat treatment process10.1007/s00170-022-09739-3 ↗
2. Development for 15CrNi3MoVA steel forgings used for hull10.14147/j.cnki.51-1396/tg.2002.02.009 ↗
3. Investigation on effective support point of single stern tube bearing for marine propulsion shaft alignment10.1016/j.marstruc.2018.10.010 ↗
4. Improving technology and optimizing production for stern shaft axis10.3969/j.issn.1001-8328.2008.05.012 ↗
5. A novel technique for reducing macrosegregation in heavy steel ingots10.1016/j.jmatprotec.2009.12.010 ↗
6. Fluid flow and inclusion motion in a multi-heat teeming tundish for heavy steel ingot10.1016/S1006-706X(13)60015-1 ↗
7. Influence of mould design on the solidification of heavy forging ingots of low alloy steels by numerical simulation10.1016/j.matdes.2009.09.045 ↗
8. Investigation on the void closure efficiency in cogging processes of the large ingot by using a 3D void evolution model10.1016/j.jmatprotec.2016.06.030 ↗
9. Shrinkage porosity criteria and optimized design of a 100-ton 30Cr2Ni4MoV forging ingot10.1016/j.matdes.2011.09.056 ↗
10. Plasticity analysis of 15CrNi3MoV steel casts10.14158/j. cnki.1001-3814.1989.01.016 ↗
11. Leading manufacture of the large-scale weldless stainless steel forging ring: innovative approach by the multilayer hot-compression bonding technology10.1016/j.jmst.2020.08.055 ↗
12. Interfacial microstructure evolution and mechanical properties of AlCoCrFeNi2.1 alloy by multilayer additive hot compression bonding10.1016/j.intermet.2023.107867 ↗
13. Isothermal compression bonding mechanism and mechanical properties of WE43 magnesium-rare earth alloy10.1016/j.msea.2021.141664 ↗
14. A hot-compression bonding method for manufacturing large high-speed homogeneous steels10.1016/j.jmrt.2022.01.043 ↗
15. Sensitivity of interfacial bonding quality on strain rate in SA508-3/316L joints produced by vacuum hot-compression bonding10.1016/j.vacuum.2024.113069 ↗
16. Interfacial healing behavior of 2507 duplex stainless steel during hot compression bonding10.1016/j.matlet.2022.133035 ↗
17. Interfacial characteristics, interfacial oxide evolution and bonding mechanism of 2219 aluminum alloy joints manufactured by hot-compression bonding10.1016/j.jmrt.2024.04.080 ↗
18. A novel strategy to enhance the interfacial bonding quality of CoCrFeMnNi high-entropy alloy joints produced by vacuum hot-compression bonding10.1016/j.msea.2024.146644 ↗
19. Grain boundary migration behavior and microstructure evolution during multilayer additive hot-compression bonding10.1016/j.jmrt.2023.12.048 ↗
20. Influence of oxide volume fraction on abnormal growth of nanostructured ferritic steels during non-isothermal treatments: an in situ study10.1016/j.actamat.2015.07.005 ↗
21. Microstructural evolution of nanostructured steel-based composite fabricated by accumulative roll bonding10.1016/j.msea.2015.05.025 ↗
22. Constitutive modeling of strain induced grain boundary migration via coupling crystal plasticity and phase-field methods10.1016/j.ijplas.2017.08.004 ↗
23. Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 71810.1016/j.msea.2016.09.100 ↗
24. Flow behavior and processing maps of high-strength low-alloy steel during hot compression10.1016/j.matchar.2019.05.009 ↗
25. Cellular automata simulation of microstructural evolution during dynamic recrystallization of an HY-100 steel10.1016/j.msea.2003.09.025 ↗
26. Stress–strain curve and stored energy during uniaxial deformation of polycrystals10.1016/j.euromechsol.2008.06.003 ↗
27. Stored energy and its role in recrystallization process10.1080/10238160108200125 ↗
28. Effect of strain-induced grain boundary migration on microstructure and creep behavior of extruded AZ31 magnesium alloy prepared by pre-compression and annealing treatment10.1016/j.mtcomm.2023.105502 ↗
29. Atomic process of point contact in gold studied by time-resolved high-resolution transmission electron microscopy10.1103/PhysRevLett.81.4448 ↗
30. Detailed analysis of surface asperity deformation mechanism in diffusion bonding of steel hollow structural components10.1016/j.apsusc.2016.03.039 ↗
31. Interfacial voids, microstructure and shear strength of TC4/TC17 bond10.1016/j.jmatprotec.2019.03.004 ↗
32. Oxidation of stainless steel in vacuum and evolution of surface oxide scales during hot-compression bonding10.1016/j.corsci.2018.11.001 ↗
33. Investigation on bonding interfaces of an SA508 steel billet manufactured by additive forging10.1007/s42243-022-00803-6 ↗
34. An improved method for the quantification of microstructures via optical microscopy10.1016/j.mtcomm.2024.108581 ↗
35. Temperature-dependent material property databases for marine steels: II. HSLA-6510.1007/s40192-021-00246-z ↗
36. The austenite reversion and co-precipitation behavior of an ultra-low carbon medium manganese quenching-partitioning-tempering steel10.1016/j.actamat.2017.12.035 ↗
37. Effect of synergistic surface treatment on the bonding strength and durability performance of aluminum-lithium alloy adhesive joints10.1016/j.ijadhadh.2024.103721 ↗