Investigation on characteristic of LED power density via tapered fiber
Source abstract
Abstract
Abstract In this paper, a tapered fiber for improving the power density of the Light Emitting Diode (LED) was designed. Numerical simulation showed that the tapered fiber makes the LED diverging light sources converge on the microscopic area, which makes the LED available for biomedical photonic imaging in the microenvironment. Based on the Monte Carlo Ray Tracing Method, we obtained the law of spot illumination and divergence angle when the light passes through the different parameters tapered fiber. In addition, the tapered fiber was designed as a spiral shape with steadily changing slope, and the effect of the spiral-bending coefficient on the light-gathering properties of the fiber was studied. The concentrating performance of tapered fiber is related to the length, size, and spiral-bending coefficient. The tapered fiber can effectively reduce the illuminant area and improve the power density of the light source.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Photoacoustic and Ultrasonic Imaging · Image Enhancement Techniques · Ocular and Laser Science Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Low cost, high color rendition, CCT variable lighting system based on W-G-B LED10.1016/j.ijleo.2021.166321 ↗
2. Nominal risk analysis of the blue light from LED luminaires in indoor lighting design10.1016/j.ijleo.2020.165599 ↗
3. Direct battery-driven solar LED lighting using constant-power control10.1016/j.solener.2012.07.028 ↗
4. Feasibility study of nonpolar LED array for color-tunable lighting and beyond10.1364/OE.382287 ↗
5. Selection of LED lighting systems for the reduction of the biodeterioration of speleothems induced by photosynthetic biofilms in the Nerja Cave (Malaga, Spain)10.1016/j.jphotobiol.2021.112155 ↗
6. Optimization of LED lighting for clinical settings10.1155/2019/5016013 ↗
7. Tailoring light emission properties and optoelectronic and optothermal responses from rare earth-doped bismuth oxide for multifunctional light shielding, temperature sensing, and photodetection10.1039/C7RA08490K ↗
8. Optimal light intensity for sustainable water and energy use in indoor cultivation of lettuce and basil under red and blue LEDs10.1016/j.scienta.2020.109508 ↗
9. White thin-film flip-chip LEDs with uniform color temperature using laser lift-off and conformal phosphor coating technologies10.1364/OE.22.031646 ↗
10. Improving light extraction of InGaN-based light emitting diodes with a roughened p-GaN surface using CsCl nano-islands10.1364/OE.19.001065 ↗
11. Effect of the silver mirror location on the luminance intensity of double-roughened GaN light-emitting diodes10.1149/1.2760320 ↗
12. Selectively grown photonic crystal structures for high efficiency InGaN emitting diodes using nanospherical-lens lithography10.1063/1.4767334 ↗
13. High Light Extracting Efficiency of Gan-Based LED Based on Photonic Crystal10.1016/j.proeng.2012.01.310 ↗
14. Super-aligned carbon nanotubes patterned sapphire substrate to improve quantum efficiency of InGaN/GaN light-emitting diodes10.1364/OE.23.00A957 ↗
15. A new optimization method of freeform surface lens based on non-imaging optics for led source10.1016/j.ijleo.2017.01.007 ↗
16. Heat dissipation and electrical conduction of an LED by using a microfluidic channel with a graphene solution10.1016/j.applthermaleng.2020.115383 ↗
17. Enhanced heat dissipation in gallium nitride-based light-emitting diodes by piezo-phototronic effect10.1021/acs.nanolett.1c00999 ↗
18. Effect of junction temperature on heat dissipation of high power light emitting diodes10.1063/1.4944800 ↗
19. Fabrication and modeling of uniform-waist single-mode tapered optical fiber sensors10.1364/AO.42.002278 ↗
20. Fabrication and laser performance of cladding uniform core tapered fiber10.1016/j.yofte.2021.102561 ↗
21. Fabrication and characterization of bare Ge–Sb–Se chalcogenide glass fiber taper10.1016/j.infrared.2016.08.016 ↗
22. Monte Carlo simulation of radiation pattern for rare earth ions doped luminescent glasses under violet LED excitation
23. Fabrication and characterization of multimaterial chalcogenide glass fiber tapers with high numerical apertures10.1364/OE.23.023472 ↗
24. Optical ray tracing method for simulating beam-steering effects during laser diagnostics in turbulent media10.1364/AO.56.00E106 ↗
25. Design of a freeform reflector for LED sources based on a feedback method10.1177/1477153514564002 ↗
26. Research on optical fiber strain sensor based on the spiral bending
27. Understanding bending losses in holey optical fibers - ScienceDirect10.1016/j.optcom.2003.09.070 ↗