The metadynamic recrystallization behavior of ultrahigh-strength stainless steel: effects of precipitates and shear bands
Source abstract
Abstract
Abstract The metadynamic recrystallization behavior of Cr-Co-Ni-Mo ultrahigh-strength martensitic stainless steel was studied in a double-pass isothermal compression test, and a metadynamic recrystallization kinetics model for softening was established. The results showed that the metadynamic recrystallization softening rate of the steel not only depended on the deformation temperature and strain rate but was also related to the dynamic precipitation and the local shear bands in the steel. When the deformation temperature was below 1050 °C, the dynamically precipitated M6C carbides pinned the grain boundaries and hindered metadynamic recrystallization. When the steel was deformed at a deformation temperature of 1000∼1050 °C and a strain rate of 1.0∼5.0 s−1, a large number of local shear bands were generated. The local shear bands increased the number of nucleation sites for dynamic recrystallization and enhanced the softening rate of metadynamic recrystallization.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Influence of refined hierarchical martensitic microstructures on yield strength and impact toughness of ultra-high strength stainless steel10.1016/j.jmst.2020.04.001 ↗
2. Research and application progress in ultra-high strength stainless steel10.11900/0412.1961.2019.00453 ↗
3. Research and application progress in ultra-high strength stainless steel10.11868/j.issn.1001-4381.2019.000122 ↗
4. Metadynamic Recrystallization Behavior of As-cast 904L Superaustenitic Stainless Steel10.1016/S1006-706X(16)30027-9 ↗
5. Dynamic recrystallization models of AerMet100 ultrahigh-strength steel during thermo-mechanical processing
6. Investigation on metadynamic recrystallization behavior in SA508-Ш steel during hot deformation10.1016/j.jmapro.2017.07.008 ↗
7. Strain induced grain boundary migration effects on grain growth of an austenitic stainless steel during static and metadynamic recrystallization10.1016/j.matchar.2015.07.003 ↗
8. In situ observations and modeling of metadynamic recrystallization in 300M steel10.1016/j.matchar.2019.109997 ↗
9. Kinetics equations and microstructural evolution during metadynamic recrystallization in a nickel-based superalloy with delta phase10.1016/j.jallcom.2016.08.096 ↗
10. Metadynamic recrystallization behavior of AZ61 magnesium alloy10.1016/j.matdes.2013.12.051 ↗
11. New insight into the mechanism of metadynamic softening in austenite10.1016/j.actamat.2010.11.012 ↗
12. Particle stimulated nucleation during dynamic and metadynamic recrystallisation of Ni-30%Fe-Nb-C alloy10.1016/j.matchar.2017.01.026 ↗
13. Hot deformation characterization of ultrahigh strength stainless steel through processing maps generated using different instability criteria10.1016/j.matchar.2017.07.041 ↗
14. Microstructural variations and kinetic behaviors during metadynamic recrystallization in a nickel base superalloy with pre-precipitated δ phase10.1016/j.matdes.2019.107584 ↗
15. The metadynamic recrystallization in the two-stage isothermal compression of 300M steel10.1016/j.msea.2012.11.116 ↗
16. Metadynamic recrystallization behavior of β-solidified TiAl alloy during post-annealing after hot deformation10.1016/j.intermet.2019.106679 ↗
17. Metadynamic Recrystallization Behavior of As-cast 904L Superaustenitic Stainless Steel10.1016/s1006-706x(16)30027-9 ↗
18. Flow localization during severe plastic deformation of AZ81 magnesium alloy: Micro-shear banding phenomenon10.1016/j.msea.2013.05.069 ↗
19. Microband/twin recrystallization during back extrusion of AZ31 magnesium10.1016/j.msea.2017.09.134 ↗
20. Shear band-related recrystallization and grain growth in two rolled magnesium-rare earth alloys10.1016/j.msea.2013.04.076 ↗
21. Modeling the kinetics of deformation-induced martensitic transformation in AISI 316 metastable austenitic stainless steel10.1016/j.vacuum.2018.08.066 ↗