Influence of the buffer layers on growth and quality of graphene films grown by pulsed laser deposition

Graphene films were grown onto two different thickness levels of SiO 2 /Si substrates, with the help of Ni film from highly ordered pyrolytic graphite through pulsed laser deposition. In this work, the influence of thickness of buffer layer of SiO 2 on quality, growth, and crystallinity of graphene films in terms of substrate temperatures has been studied. All graphene samples were characterized by using Raman spectroscopy, Scanning electron microscopy (SEM), and x-ray photoelectron spectroscopy (XPS). The micro-Raman spectroscopic results clearly reveal that each SiO 2 /Si substrate does not behave in same manner during PLD growth process. From the Raman spectra, it was noticed that the quality, growth and crystallinity of graphene films was rapidly improved on commercially available SiO 2 (100 nm)/Si substrates, while gradually improved on thermally grown SiO 2 (400 nm)/Si substrates upon increasing growth temperature from 700 °C to 800 °C. Moreover, it was also observed from the Raman spectra that the number of graphene layers was found to be quite similar on both SiO 2 layer at higher temperature of 800 °C. The microstructure of the as-synthesized graphene films also confirmed that the quality of graphene layers continuously improved over commercially available SiO 2 substrates with the increment in substrate temperature. XPS results obviously verify that crystallinity and carbon-carbon bond strength increased while defects reduced on SiO 2 (100 nm)/Si substrates with the increase growth temperature from 700 °C to 800 °C. Thus, the presented study provides a facile, rapid, and effective technique to control the quality, growth, and crystallite size of graphene films onto different thickness SiO 2 layer on Si.