Preparation and properties of composite phase-change nanofiber membrane by improved bubble electrospinning
Source abstract
Abstract
Abstract Bubble electrospinning technology can be used for mass production of nanofibers, it has been widely used in polymer electrospinning such as PVA, PVP and PAN, but there are no reports on the preparation of composite phase-change nanofibers by this method. In this paper, the transparent solution 1(PEG was put into formic acid according to the mass fraction of 60%) was mixed with the transparent solution 2 (PA66 was put into formic acid according to the mass fraction of 15%) according to the mass ratio of 15:85 , 25:75 , 35:65 and 45:55 to prepare four kinds of spinning solutions. And the pure PA66 nanofiber membrane(PNM) and PA66/PEG composite nanofiber membrane(PGCNM) were fabricated by the improved bubble electrospinning device on the basis of bubble electrospinning device invented by He Jihuan etc Also we analyzed their surface microstructure and tested their mechanical properties, thermal properties and molecular structure. The lower the content of PA66, the smaller the adhesion granular matter on the nanofiber surface and the thicker the diameter of the nanofiber, but the surface of the nanofiber is more smooth. The PGNCM appeared double absorption peak at 1515.5 cm−1and 1642 cm−1and existed weak absorption peak at 3298 cm−1 ∼ 3302 cm−1. The tensile strength and the elongation at break of the PGNCM was less than that of the PNM. The hot decomposition process of the PGNCM was composed the melting exothermic process of PEG and PA66. When the mixed ratio between PA66 and PEG was 15:85, the decomposition rate of residues between 210 ∼ 310 °C was the fastest.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Quasi-solid-state electrolyte for dye sensitized solar cells based on Nanofiber PMA-PVDF and PMA-PVDF/PEG membranes10.20964/2016.07.19 ↗
2. Electrospun silk fibroin nanofibers with improved surface texture
3. Electrospun curcumin loaded poly(lactic acid) Nanofiber mat on the flexible crosslinked PVA/PEG membrane film: characterization and in vitro release kinetic study
4. Production of PEG grafted PAN copolymers and their electrospun nanowebs as novel thermal energy storage materials10.1016/j.tca.2016.10.002 ↗
5. Self-assembled peptide amphiphile Nanofibers and PEG composite hydrogels as tunable ECM mimetic microenvironment10.1021/acs.biomac.5b00041 ↗
6. Composites of polyethylene glycol (PEG600) with gypsum and natural clay as new kinds of building PCMs for low temperature-thermal energy storage10.1016/j.enbuild.2013.10.034 ↗
7. Thermal conductivity enhancement of PEG composite PCM/SiO2 by in situ Cu doping10.1016/j.solmat.2012.06.012 ↗
8. Electrospinning and electrospun Nanofibers: methods, materials, and applications10.1021/acs.chemrev.8b00593 ↗
9. Structural design and environmental applications of electrospun nanofibers10.1016/j.compositesa.2020.106009 ↗
10. Preparation of arrayed helical micro/nanofibers by near-field lectrospinning10.1088/2053-1591/aaefa9 ↗
11. Control of bubble size and bubble Number in bubble electrospinning10.1016/j.camwa.2012.03.021 ↗
12. Review on fiber morphology obtained by bubble electrospinning and blown bubble spinning10.2298/TSCI1205263H ↗
13. The smaller, the better: from the spider-spinning to bubble-electrospinning10.12693/APhysPolA.121.254 ↗
14. The principle of bubble electrospinning and its experimental verification10.1515/POLYENG.2008.28.1-2.55 ↗
15. Bubble Electrospinning for Mass Production of Nanofibers10.1515/IJNSNS.2007.8.3.393 ↗
16. Bubbfil Spinning for Mass-Production of Nanofibers10.2298/TSCI1405718C ↗
17. Fabrication and characterization of ZrO2 Nanofibers by critical bubble electrospinning for high-temperature-resistant adsorption and separation10.1177/0263617419828268 ↗
18. Facile preparation of a-Fe2O3 nanobulk via bubble electrospinning and thermal treatment10.2298/TSCI1603967L ↗
19. Microstructure and property of regenepercentaged silk fibron/chitosan Nanofibers10.2298/TSCI1603979Z ↗
20. Sudden solvent evaporation in bubble electrospinning for fabrication of unsmooth Nanofibers10.2298/TSCI160725075Z ↗
21. Effect of solution concentration on diameter and morphology of PVA Nanofibres in bubble electrospinning process10.1179/026708310X12798718274476 ↗