An adapted approach for solidification crack elimination in Al7075 TIG welding

Abstract Solidification cracking is a long-standing issue in fusion welding of high-strength aluminum alloys like Al7075, imposing limitations on their aerospace and automotive applications. The current study introduces a novel adapted approach in solidification crack elimination by incorporating TiC nanoparticles into the fusion zone using a filler paste as an easier to fabricate alternative to filler metals investigated so far. To assess the weldability of the proposed method, 3-mm thick Al7075 sheets were TIG welded (i) autogenously without any TiC nanoparticles (autogenous), (ii) heterogeneously using 1 vol.% TiC-nanoparticle enhanced Al7075 filler metal (heterogeneous filler metal), and (iii) heterogeneously using an in-house fabricated Al7075 paste containing 1 vol.% TiC nanoparticles (heterogeneous filler paste). Macroscopic analysis of weld specimens proved that both heterogeneous welding approaches effectively eliminated solidification cracks. This was confirmed by Houldcroft solidification susceptibility index deduction tests that demonstrated a strong reduction in solidification crack susceptibly in all heterogeneous joints as compared to the autogenous joint. Microstructural analysis confirmed the transformation from columnar to equiaxed grain morphology in the fusion zone as crucial factor in crack elimination. Overall, the proposed filler paste method represents a highly cost-efficient approach for eliminating solidification cracks in TIG joining of difficult to weld aluminium alloys.