journal article·2021-08-01Open access

Insights into effect of first-step austempering temperature on the microstructure and properties of austempered ductile iron

Yu Zhang, Erjun Guo, Liping Wang, Sicong Zhao, Xiaoyu Liu, Pengyue Yi, Yan Li, Yicheng Feng, Meihui Song

Materials Research Express· Volume 8· Issue 8

Abstract

Abstract Austempered ductile iron (ADI) is a revolutionary material with high strength and hardness combined with excellent ductility and toughness. The discovery of a two-step austempering process has resulted in superior combination of all the mechanical properties. Therefore, ADI has many different applications in varying fields. One notable application of ADI is in transmission components for new energy vehicles. As the automotive continues to develop, ADI transmission components with higher damping properties are required, because the damping properties of ADI affect the vibration and noise of the transmission system. However, the mechanism behind the damping of ADI, as well as a full characterisation of the damping properties, has not been thoroughly investigated in the literature. Therefore, it is necessary to reveal the influencing factors and mechanism of the damping properties of ADI. In this paper, the effect of first-step austempering temperature on the microstructure, mechanical properties, and damping properties of ADI was investigated. The results revealed that the tensile strength, yield strength, and elongation of ADI all initially increased, until reaching a global maximum value (1320 MPa, 1230 MPa, and 13.2%, respectively) when the first-step austempering temperature was 280 °C, followed by a decrease in value. Interestingly, the impact energy of ADI initially decreased before reaching a global minimum and then increasing to a maximum value of 93.5 J, when the first-step austempering temperature reached 320 °C. With increasing strain amplitude, the internal friction values (Q−1) of ADI treated with different first-step austempering temperatures all increased gradually, and the Q−1 values of ADI with first-step austempering temperatures of 240 and 260 °C were higher than those of other samples. Moreover, the damping properties of ADI varied with frequency with obvious S-K peaks and Ge peaks.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Austempered ductile iron (ADI) alternative material for high performance applications10.1007/s40962-016-0085-8 ↗
2. Comparison of machinability of manganese alloyed austempered ductile iron produced using conventional and two step austempering processes10.1088/2053-1591/aac254 ↗
3. Microstructure and mechanical properties of austempered dutcile iron with different strength grades10.1016/j.matlet.2013.12.086 ↗
4. Austempered ductile iron: an alternative material for earth moving components10.1016/S0958-9465(02)00078-1 ↗
5. Microstructure and fracture of alloyed austempered ductile iron10.1016/j.matchar.2006.01.014 ↗
6. Development of austempered ductile cast iron (ADI) with simultaneous high yield strength and fracture toughness by a novel two-step austempering process10.1016/S0921-5093(01)01210-2 ↗
7. Improvement in strength and toughness of austempered ductile cast iron by a novel two-step austempering process10.1016/j.matdes.2003.09.021 ↗
8. Fracture toughness characterization of austempered ductile iron produced using both conventional and two-step austempering processes10.1016/j.matdes.2008.09.013 ↗
9. Mechanical characterization of austempered ductile iron obtained by two step austempering process10.1007/s12666-017-1099-5 ↗
10. Investigating the machinability of austempered ductile irons having different austempering temperatures and times10.1016/j.matdes.2007.04.002 ↗
11. Evaluation of machinability of austempered ductile irons in terms of cutting forces and surface quality10.1016/j.jmatprotec.2005.05.058 ↗
12. Material-related aspects of the machinability of austempered ductile iron10.1007/s11740-010-0227-4 ↗
13. An analysis of the machinability of ASTM grades 2 and 3 austempered ductile iron10.1016/j.jmatprotec.2012.11.004 ↗
14. Mechanical and tribological behavior of Ti/TiN and TiAl/TiAlN coated austempered ductile iron10.1016/j.tsf.2017.12.014 ↗
15. Wear and friction behavior of austempered ductile iron as railway wheel material10.1016/j.matdes.2015.10.037 ↗
16. Study of wear behaviour of ductile iron subjected to two step austempering10.3139/146.110350 ↗
17. Influence of two-step austempering temperature and time on mechanical properties of austempered ductile iron10.1166/asem.2019.2388 ↗
18. Engineering nucleation kinetics of graphite nodules in inoculated cast iron for reducing porosity10.1007/s11663-018-1488-0 ↗
19. Hao · 2014 · 185
20. Effect of notch severity on fatigue behaviour of ADI castings10.4236/msa.2013.42012 ↗
21. Effect of austempering temperature on microstructure and properties of carbidic austempered ductile iron10.4028/www.scientific.net/AMR.284-286.1085 ↗
22. Effect of microstructure on abrasion wear behavior of austempered ductile cast iron (ADI) processed by a novel two-step austempering process10.1016/j.msea.2005.06.036 ↗
23. Microstructural and mechanical properties of Cu–Ni–Mn–Mo austempered ductile iron obtained from two-step hot air austempering10.1016/j.jmrt.2020.01.036 ↗
24. The influence of the austenite dispersion on phase transformation during the austempering of ductile cast iron having a dual matrix structure10.3139/146.101697 ↗
25. Microstructure and mechanical properties of twostep Cu-alloyed ADI treated by different second step austempering temperatures and times10.1007/s41230-019-9064-z ↗
26. Influence of two-step austempering temperature and time on mechanical properties of austempered ductile iron10.1166/asem.2019.2388 ↗
27. A synthesis of the low- and medium-cycle fatigue behaviour of as-cast and austempered ductile irons based on the plastic strain energy10.1016/j.mspro.2014.06.191 ↗
28. TEM analysis of austempered ductile iron processed through conventional and two-step austempering process10.1007/s12666-017-1099-5 ↗
29. An investigation on the stability of austenite in Austempered Ductile Cast Iron (ADI)10.1016/j.msea.2014.12.038 ↗
30. Influence of heat treatment on fatigue crack growth of austempered ductile iron10.1023/A:1013827511859 ↗
31. Effect of Cu content on microstructures and mechanical properties of ADI treated by two step austempering process10.1007/s41230-019-8145-3 ↗
32. Effect of partitioning heattreatment temperature on damping properties of ADI10.15938/j.jhust.2018.02.022 ↗