journal article·2021-04-01Open access

Effect of explosive compaction on microstructure of ODS FeCrAl alloy fabricated by oxidation method

Fuzhao Yan, Jing Li, Liangyin Xiong, Shi Liu

Materials Research Express· Volume 8· Issue 4

Abstract

Abstract A fabrication process of 14Cr ODS FeCrAl alloy including direct oxidation treatment, explosive compaction and vacuum post-sintering was proposed herein. A thin oxide layer formed on the powder surface during a low-temperature oxidation treatment was crushed in the explosive compaction, resulting in the redistribution of oxides at prior powder boundary (PPB) and the subsequent formation of an exclusive iron oxide layer between the grains of compacted materials. A large number of defects (dislocations and grain boundaries) were also produced in the compacted particles. Through characterizing the evolution of oxide dispersoids during the course of fabrication, the contribution of explosive compaction to dislocations, nanoscale precipitates and mechanical properties was clarified. The results show that the iron oxide layer became the container for transporting oxygen and was dissolved during the post-sintering, which affected the composition of nanoscale precipitates. The high-density dislocations not only became the rapid diffusion paths of oxygen, aluminum and yttrium atom, but also became the preferential sites of Y-Al-O precipitation. With the manufacturing method, the more uniform distribution of oxide nanoparticles and the higher microhardness of ODS alloy were obtained.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nuclear Materials and Properties · High-Temperature Coating Behaviors · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Oxide dispersion-strengthened/ferrite-martensite steels as core materials for Generation IV nuclear reactors10.1016/b978-0-08-100906-2.00010-0 ↗
2. Effect of extensive and limited plastic deformation on recrystallized microstructure of oxide dispersion strengthened Fe-Cr-al alloy10.3390/met8121052 ↗
3. Alternative fabrication routes toward oxide-dispersion-strengthened steels and model alloys10.1007/s11661-016-3616-2 ↗
4. Development of ultra high strength nano-Y2O3 dispersed ferritic steel by mechanical alloying and hot isostatic pressing10.1016/j.msea.2011.06.039 ↗
5. Microstructure and mechanical property of in situ nano-particle strengthened ferritic steel by novel internal oxidation10.1016/j.msea.2014.05.020 ↗
6. ODS ferritic steels obtained from gas atomized powders through the STARS processing route: reactive synthesis as an alternative to mechanical alloying10.1016/j.nme.2018.06.014 ↗
7. Nano-scale oxide dispersoids by internal oxidation of Fe–Ti–Y intermetallics10.1016/j.msea.2007.10.074 ↗
8. Reactive gas atomization processing for Fe-based ODS alloys10.1016/j.jnucmat.2011.08.015 ↗
9. ODS ferritic steels produced by an alternative route (STARS): microstructural characterisation after atomisation, HIPing and heat treatments10.1080/00325899.2016.1254894 ↗
10. Microstructure evolution and mechanical properties of ODS FeCrAl alloys fabricated by an internal oxidation process10.1016/j.msea.2019.04.088 ↗
11. Formation mechanism of nanoparticles in Fe-Cr-Al ODS alloy fabricated by direct oxidation method10.1007/s40195-020-01184-z ↗
12. The role of yttrium and titanium during the development of ODS ferritic steels obtained through the STARS route: TEM and XAS study10.1016/j.jnucmat.2018.03.020 ↗
13. Microstructural comparison of Oxide Dispersion Strengthened Fe-14Cr steels produced by HIP and SPS10.1016/j.fusengdes.2019.03.182 ↗
14. Vacancies as a constitutive element for the design of nanocluster-strengthened ferritic steels10.1007/s11706-009-0001-8 ↗
15. Explosive compaction of superconducting powder10.1007/BF02845939 ↗
16. Shock wave compaction and sintering of mechanically alloyed CoCrFeMnNi high-entropy alloy powders10.1016/j.msea.2017.09.132 ↗
17. The effect of heat treatment on explosively compacted (Y-Ba-K-Cu-O) superconductive powders10.1016/S0921-4534(97)01444-5 ↗
18. Mechanical and microstructural characteristics of Ti6Al4V/AA2519 and Ti6Al4V/AA1050/AA2519 laminates manufactured by explosive welding10.1016/j.matdes.2016.08.088 ↗
19. Shock compaction of silicon carbide powder10.1007/BF00585748 ↗
20. A consolidation mechanism for the compaction of copper powder at high pressures10.1016/0924-0136(90)90250-X ↗
21. On the modelling of the compaction mechanism of shock compacted powders10.1016/S0924-0136(00)00748-2 ↗
22. Explosive compaction of Al2O3 nanopowders10.1016/j.ceramint.2016.02.066 ↗
23. Grain boundary segregation in yttrium-doped polycrystalline TiO210.1016/j.actamat.2003.10.016 ↗
24. Structural features of Y-saturated and supersaturated grain boundaries in alumina10.1016/S1359-6454(00)00076-8 ↗
25. Microstructural characterization of ODS ferritic steels at different processing stages10.1016/j.fusengdes.2015.06.010 ↗
26. Structural and mechanical properties of aluminium-based composites processed by explosive compaction10.1016/j.powtec.2017.03.027 ↗
27. Fabrication of nanocrystalline AlCoCrFeNi high entropy alloy through shock consolidation and mechanical alloying10.3390/e21090880 ↗
28. High velocity compaction of 0.9Al2O3/Cu composite powder10.1016/j.matdes.2013.12.059 ↗
29. Characterization of oxide dispersoids and mechanical properties of 14Cr-ODS FeCrAl alloys10.1016/j.jallcom.2019.152282 ↗
30. Formation of oxides particles in ferritic steel by using gas-atomized powder10.1016/j.jnucmat.2009.10.057 ↗
31. Effect of mechanical alloying and consolidation process on microstructure and hardness of nanostructured Fe–Cr–Al ODS alloys10.1016/j.msea.2011.08.041 ↗
32. Effect of oxide films in the sintering of aluminum powders10.1007/BF00800343 ↗
33. Thermodynamic stability of oxide phases of Fe-Cr based ODS Steels via quantum mechanical calculations10.1016/j.proeng.2014.11.099 ↗
34. Observation of giant diffusivity along dislocation cores10.1126/science.1151771 ↗
35. Dislocation pipe diffusion10.1016/0001-6160(64)90220-2 ↗
36. Ostwald ripening of two-phase mixtures10.1146/annurev.ms.22.080192.001213 ↗
37. Ostwald ripening in a Pt/SiO2 model catalyst studied by in situ TEM.10.1016/j.jcat.2011.04.011 ↗