Experimental and finite element simulation study of the mechanical behaviors of aluminum foam-filled single/double tubes
Source abstract
Abstract
Abstract Aluminum foam-filled tubes are complicated structures created by filling one or more thin-walled metal tubes with varying shapes in cross-sections with aluminum foam. We optimized the structure of aluminum foam-filled tubes using software simulation, compression, and three-point bending experiments. Filling aluminum foam not only improves the axial compressive performance and bending strength of the thin-walled metal tube but also eliminates the disadvantage of the low strength of the aluminum foam. The aluminum foam-filled single tube exhibited significant improvements in load-bearing and energy absorption, with a one-time increase in load-bearing and five times increase in energy absorption compared with an empty tube. The aluminum foam-filled single tube with a smaller diameter-to-thickness ratio has a higher load-bearing capacity. In contrast, the length-to-diameter ratio has a lower impact on load-bearing capacity. Once the filling length reaches the effective filling length, the structure can still support higher loads and effectively reduce its overall weight. The compression and bending properties in the double-tube structure filled with foam aluminum improved significantly compared with the empty tube and single-tube structure filled with aluminum foam. The total compressive energy absorption capacity in the double-tube structure filled with aluminum foam is 2.01 times that of the empty tube and 1.81 times that in the single-tube-filled structure. When the wall thickness of the filled stainless steel tube is 1.0 mm, the total bending energy absorption and the specific absorption energy of the aluminum foam-filled double tube structure are 1.5 and 2.1 times that of the corresponding aluminum foam-filled single tube, respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Magnesium Alloys: Properties and Applications · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. The effect of outer tube on quasi-static compression behavior of aluminum foam-filled tubes10.1016/j.compstruct.2020.112357 ↗
2. Crashworthiness assessment of auxetic foam-filled tube under quasi-static axial loading10.1016/j.matdes.2015.08.152 ↗
3. Density gradient tailoring of aluminum foam-filled tube10.1016/j.compstruct.2019.04.026 ↗
4. Experimental study on the crashworthiness of bio-inspired aluminum foam-filled tubes under axial compression loading10.1016/j.tws.2020.106937 ↗
5. On the lateral compressive behavior of empty and ex situ aluminum foam-filled tubes at high temperature10.3390/ma11040554 ↗
6. Foaming of friction stir processed Al/MgCO3 precursor via flame heating10.1088/2053-1591/ab6ef0 ↗
7. Quasi-static compressive behavior of the ex situ aluminum-alloy foam-filled tubes under elevated temperature conditions10.1016/j.matlet.2017.07.018 ↗
8. Aluminum foam-filled extrusions subjected to oblique loading: Experimental and numerical study10.1016/j.ijsolstr.2003.09.053 ↗
9. Experimental investigation of interaction effects in foam-filled thin-walled aluminum tubes10.1007/s10853-006-0722-3 ↗
10. Quasi-static compression behavior of open-cell aluminum foam-filled circular tubes
11. Quasi-static and dynamic crushing of empty and foam-filled tubes10.1023/A:1012916408297 ↗
12. Effect of adhesive on the strengthening of aluminum foam-filled circular tubes10.1023/B:JMSC.0000013929.80914.45 ↗
13. Crashworthiness of circular fiber reinforced plastic tubes filled with composite skeletons/aluminum foam under drop-weight impact loading10.1016/j.tws.2020.107380 ↗
14. Mechanical properties of auxetic circular and square tubes filled with aluminum foam10.1016/j.engstruct.2023.115732 ↗
15. Impact behavior of a cladding sandwich panel with aluminum foam-filled tubular cores10.1016/j.tws.2021.108459 ↗
16. Quasi-static axial compression behavior of constraint hexagonal and square-packed empty and aluminum foam-filled aluminum multi-tubes10.1016/j.tws.2006.07.003 ↗
17. Energy absorption performance of thin-wall aluminum alloy multi-cell and single-cell components filled with aluminum foam10.6052/j.issn.1000-4750.2020.06.0428 ↗
18. Energy absorption analysis of aluminum filled foam tube under Axial load using finite element method with cross section variations[C]//IOP conference series: materials science and engineering10.1088/1757-899X/875/1/012060 ↗
19. Deformation, energy absorption and crushing behavior of single-, double-and multiwall foam filled square and circular tubes10.1016/j.tws.2015.01.004 ↗
20. Performance of hollow and aluminum foam-filled multi-cell thin-walled aluminum alloy tubes (6063-T5) under axial impact[C]//Structures10.1016/j.istruc.2022.12.019 ↗
21. Experiment and numerical simulation on the dynamic response of foam-filled tubes under lateral blast loading10.1007/s10338-021-00285-1 ↗
22. Buckling behaviors of aluminum foam-filled aluminum alloy composite columns under axial compression10.1016/j.tws.2022.109399 ↗
23. Processing of in situ aluminium foam-filled stainless steel tube with foam-tube bonding for enhanced crashworthiness10.1016/j.jmapro.2022.08.020 ↗
24. Mechanical investigation of in situ produced aluminium matrix syntactic foam-filled tubes10.1016/j.matpr.2020.12.161 ↗
25. Comparative analysis of crashworthiness of empty and foam-filled thin-walled tubes10.1016/j.tws.2017.12.017 ↗
26. Mechanical response of aluminum foam sandwich structure under impact load10.1088/2053-1591/ac493e ↗
27. Numerical crushing analysis of aluminum foam-filled corrugated single-and double-circular tubes subjected to axial impact loading10.1016/j.tws.2015.08.009 ↗
28. Crush behavior optimization of multi-tubes filled by functionally graded foam10.1016/j.tws.2015.10.025 ↗
29. Static and dynamic crushing of square aluminum extrusions with aluminum foam filled10.1016/S0734-743X(99)00169-4 ↗
30. Bending crush resistance of partially foam-filled sections10.1002/(SICI)1527-2648(200004)2:43.0.CO;2-J ↗