journal article·2022-05-01Open access

Effect of ambient atmosphere on the formation and evolution of conjugated structure of pre-oxidized polyacrylonitrile

Bin Wang, Shuai Lei, Chenggao Li, Aijun Gao

Materials Research Express· Volume 9· Issue 5

Abstract

Abstract The ambient atmosphere has the remarkable effect on the chemical reaction mechanism and the formation of characteristic chemical structures and conjugated structures for pre-oxidized polyacrylonitrile (PAN). In the present paper, fourier transform infrared spectroscopy (FT-IR) and ultraviolet visible spectroscopy (UV–vis) were used to characterize the variations of chemical reaction characteristic structures and conjugate structures of copolymerized PAN in nitrogen and air atmosphere, respectively. Combined with the multivariate reaction model proposed by the predecessors, it can be found that two main conjugated structures (conjugated polyene and conjugated aromatic heterocycle) formed during the pre-oxidation process of copolymerized PAN. In nitrogen atmosphere, the formed main structure units were the conjugated diene and conjugated double ring with 1–2 double bonds. By contrast, the formed main units in air were the conjugated diene and conjugated tricyclic with a double bond. During the whole pre-oxidation process, the maximum unit numbers of conjugated double bonds and conjugated rings were no more than four and six, respectively. Increasing the heat treatment temperature favored to form more conjugate structures than prolonging the heat treatment time. Furthermore, with the increase of heat treatment temperature or time in air, the main conjugate unit numbers had no obvious change, while the maximum unit numbers increased slightly. For the exposure in nitrogen atmosphere, the main conjugated polycyclic structure was transformed into conjugated tricyclic structure after the heat treatment at 250 °C for more than 3 h. In addition, when the heat treatment temperature and time were 280 °C for more than 4 h, the main conjugated polyene structure was transformed into conjugated triene, and the maximum conjugated unit numbers increased slightly.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Polymer crystallization and properties · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Effects of rod size and fiber hybrid mode on the interface shear strength of carbon/glass fiber composite rods exposed to freezing-thawing and outdoor environments10.1016/j.jmrt.2021.08.088 ↗
2. Effect of fiber hybridization types on the mechanical properties of carbon/glass fiber reinforced polymer composite rod10.1080/15376494.2021.1974620 ↗
3. Combined effects of sustained bending loading, water immersion and fiber hybrid mode on the mechanical properties of carbon/glass fiber reinforced polymer composite10.1016/j.compstruct.2021.115060 ↗
4. A digital twin approach to a quantitative microstructure-property study of carbon fibers through HRTEM characterization and multiscale FEA10.3390/ma13194231 ↗
5. Technology status and research progress of PAN-based high-modulus carbon fibers in China and abroad
6. High strength and high modulus carbon fibers10.1016/j.carbon.2015.05.016 ↗
7. The formation of conjugated structure and its transformation to pseudo-graphite structure during thermal treatment of polyarylonitrile: effect of molecular composition and configuration10.1177/0954008316669990 ↗
8. Kinetic study of the dehydrogenation reaction in polyacrylonitrile-based carbon fiber precursors during thermal stabilization10.1002/app.37878 ↗
9. The conjugated plane formed in polyacrylonitrile during thermal stabilization10.1002/app.43890 ↗
10. A review of heat treatment on polyacrylonitrile fiber10.1016/j.polymdegradstab.2007.03.023 ↗
11. Low-temperature thermal stabilization of polyacrylontrile-based precursor fibers towards efficient preparation of carbon fibers with improved mechanical properties10.1016/j.polymer.2015.08.049 ↗
12. Evolution of aggregation structure of polyacrylonitrile fibers in the cyclization reaction10.1002/app.35361 ↗
13. Kinetics of the cyclization and isomerization reactions in polyacrylonitrile based carbon fiber precursors during thermal‐oxidative stabilization10.1002/app.48819 ↗
14. Structure evolution mechanism of poly (acrylonitrile/itaconic acid/acrylamide) during thermal oxidative stabilization process10.1007/s10118-017-1945-2 ↗
15. Property changes of powdery polyacrylonitrile synthesized by aqueous suspension polymerization during heat-treatment process under air atmosphere10.1016/j.jcis.2008.09.055 ↗
16. Effects of oxygen content in the atmosphere on thermal oxidative stabilization of polyacrylonitrile fibers10.1039/C6RA15308A ↗
17. Indicators for evaluation of progress in thermal stabilization reations of polyacrylonitrile fibers10.1002/app.40343 ↗
18. Controlled architectures of poly (acrylonitrile co-itaconic acid) for efficient structural transformation into carbon materials10.1016/j.carbon.2013.12.068 ↗
19. Time dependent structure and property evolution in fibres during continuous carbon fibre manufacturin10.3390/ma12071069 ↗
20. The effect of heat treatment temperature and time on the microstructure and mechanical propertise of PAN-based carbon fibers10.1007/s10853-013-7762-2 ↗
21. Chemical reactions and their kinetics of atactic polyacrylonitrile as revealed by solid state 13C10.1021/acs.macromol.6b02239 ↗
22. Effect of polyacrylonitrile precursor orientation on the structures and properties of thermally stabilized carbon fiber10.3390/ma14123237 ↗
23. Improving stabilization degree of stabilized fibers by pretreating polyacrylonitrile precursor in nitrogen10.1016/j.matlet.2012.02.103 ↗
24. Evolution mechanism of cyclized structure of PAN-based pre-oxidized fiber during low temperature carbonization process10.1088/2053-1591/ac3587 ↗
25. Effects of an itaconic acid comonomer on the structural evolution and thermal behaviors of polyacrylonitrile used for polyacrylonitrile-based carbon fibers10.1002/app.40834 ↗
26. Thermal stabilization of polyacrylonitrile fibres.10.1016/S0032-3861(98)00778-2 ↗
27. A chemical means of distinguishing between conjugated, and conjugated, bonds10.1002/macp.1966.020980121 ↗
28. Formation and evolution of sp2 hybrid conjugate structure of polyacrylonitrile precursor during stabilization10.3390/ma15010030 ↗
29. Thermal conversion of polyacrylonitrile (PAN) in solution10.1016/0032-3950(68)90015-4 ↗
30. Effect of stretching on the orientation structure and reaction behavior of PAN fiber during the thermal stabilization10.1088/2053-1591/ac19e9 ↗
31. Preparation and characterization of polyacrylonitrile doped PVDF/heteropoly acid composite menbranes10.1177/0954008312439082 ↗
32. Mechanism and kinetics of the stabilization reations of itaconic acid-modified polyacrylonitrile10.1016/j.polymdegradstab.2008.05.021 ↗
33. Huang · 2000