RETRACTED: Tribological and microstructure studies of LM26/SiC metal matrix composite materials and structures for high temperature applications
This record is marked as retracted by the source. Review the publisher’s notice before using its findings.
Source abstract
Abstract
Abstract This study aimed to investigate the tribological and microstructural characteristics of LM26 composites reinforced with silicon carbide to evaluate their suitability for high-temperature applications. For the sample fabrication, the modified stir-casting method was optimized using a Taguchi L16 orthogonal array. The wear rate and friction behavior were evaluated using the Taguchi’s S/N ratio analysis. When SiC was incorporated into the composite, the wear resistance increased by up to 15 wt%. The wear resistance of the LM26/SiC composite was improved compared to that of the pure LM26 aluminum alloy. The results of this study provide useful information to improve the wettability of metal matrix composites made from commercial-grade LM26 aluminum alloy by adjusting the SiC weight percentage. This type of composite has the potential as a replacement material for traditional applications such as heat sinks, heat exchanger fins, and electronic packaging.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. A metal hybrid bistable composite tube for multifunctional and reconfigurable antenna10.1016/j.compscitech.2022.109887 ↗
2. Numerical and experimental study on mechanical strength of internally pressurized laminated woven composite shells incorporated with surface-bounded sensors10.1016/j.compositesb.2016.03.020 ↗
3. First-ply failure prediction of an unsymmetrical laminated ellipsoidal woven GFRP composite shell with incorporated surface-bounded sensors and internally pressurized10.1016/j.compositesb.2015.03.058 ↗
4. Study of manufacturing and material properties of the hybrid composites with metal matrix as tool materials10.1016/j.rineng.2022.100647 ↗
5. William · 2015
6. Effect of tungsten carbide addition on the microstructure and mechanical behavior of titanium matrix developed by powder metallurgy route10.1155/2022/2266951 ↗
7. Mechanical and wear behaviour of nano-fly ash particle-reinforced mg metal matrix composites fabricated by stir casting technique10.1155/2022/5465771 ↗
8. Mechanical behavior of multiwalled carbon nanotube reinforced 7075 aluminum alloy composites prepared by mechanical milling and hot extrusion10.1590/1980-5373-mr-2018-0652 ↗
9. Influence of microfillers addition on the flexural properties of carbon fiber reinforced phenolic composites10.1177/00219983211031633 ↗
10. Metal- matrix composite processing technologies for aircraft engine applications10.1007/BF02648820 ↗
11. Review on metal matrix composites for marine applications10.1016/j.matpr.2017.11.203 ↗
12. Composite materials: a review of polymer and metal matrix composites, their mechanical characterization, and mechanical properties
13. A review on the production of metal matrix composites through stir casting—Furnace design, properties, challenges, and research opportunities10.1016/j.jmapro.2019.04.017 ↗
14. Tribological properties of CNTs-reinforced nano composite materials10.3390/lubricants11030095 ↗
15. Microstructure, mechanical and ablation properties of transpiration cooling applied to C/C-SiC composite for novel anti-ablation material10.1007/s10443-022-10058-9 ↗
16. Effect of dual reinforced ceramic particles on elevated temperature tribological properties of hybrid aluminium matrix composites10.1080/2374068X.2020.1853495 ↗
17. Wear behavior and wear mechanism of iron foam reinforced SiCp/A359 interpenetrating phases composites at high temperature10.1177/00219983221137674 ↗
18. Comprehensive review on fabrication methods of metal matrix composites and a case study on squeeze casting
19. Evaluation of dynamic mechanical properties of fique fabric/epoxy composites10.1590/1980-5373-mr-2019-0125 ↗
20. Tribological characterization of LM26/SiC/Ni.-Gr. Hybrid aluminium matrix composites (HAMCs) for high temperature applications10.1016/j.matpr.2020.06.003 ↗
21. Kandasamy · 2023
22. Recent 3D and 4D intelligent printing technologies: a comparative review and future perspective10.1016/j.procs.2020.03.434 ↗
23. Mechanical comparison of new composite materials for aerospace applications10.1016/j.compositesb.2018.10.101 ↗
24. The interface reaction of SiC/Al composites by spark plasma sintering10.1016/j.jallcom.2023.169895 ↗
25. Fabrication of high-performance 3D-interpenetrated network structures SiC/Al composites with SiC equiaxed grain frameworks10.1016/j.ceramint.2022.10.356 ↗
26. SiC/graphene reinforced aluminum metal matrix composites prepared by powder metallurgy: a review10.1016/j.jmapro.2023.02.026 ↗
27. Optimization of squeeze casting process parameters for the production of Al composite reinforced with bone powder10.1016/j.matpr.2023.02.222 ↗
28. SiC-Based Composite Material Reinforced with Molybdenum Wire10.3390/met13020313 ↗
29. Development and mechanical properties of SiC reinforced cast and extruded Al based metal matrix composite10.1016/j.mspro.2014.07.381 ↗
30. Silicon carbide reinforced aluminium metal matrix composites for aerospace applications: a literature review
31. Metal matrix composites reinforced with SiC long fibers and carbon nanomaterials produced by electrodeposition
32. Impact of silicon carbide reinforcement on characteristics of aluminium metal matrix composite10.1088/1742-6596/1781/1/012031 ↗
33. Preliminary evaluations on development of recycled porcelain reinforced LM-26/Al-Si10Cu3Mg1 alloy for piston materials10.1007/s12633-018-9979-9 ↗
34. Production of high performance AA7150-1% SiC nanocomposite by novel fabrication process of ultrasonication assisted stir casting10.1016/j.ultsonch.2019.104665 ↗
35. Recent progress in hybrid aluminum composite: manufacturing and application10.3390/met11121919 ↗
36. Study of stirrer speed and preheat temperature on stir cast aluminium matrix composite materials - a review10.1016/j.matpr.2021.06.442 ↗
37. ‘Optimization of tribological properties of aluminum hybrid composites using Taguchi design10.1177/0021998316672294 ↗
38. Experimental analysis and parametric optimization on compressive properties of diamond-reinforced porous Al composites
39. Study of tribological properties of Al6061 hybrid nano composites
40. Modeling and optimization of Al/SiCp MMC machining using taguchi approach10.1016/j.measurement.2013.06.001 ↗
41. Optimization of dry sliding wear performance of functionally graded Al6061/20% SiC metal matrix composite using Taguchi method10.1016/j.matpr.2020.03.414 ↗
42. Dry Sliding Wear Behavior of Aluminum-Based Metal Matrix Composites with Single (Al2O3) and Hybrid (Al2O3 + SiC) Reinforcements10.1007/s13632-013-0113-5 ↗
43. Abrasive wear behaviour of SiC/2014 aluminium composite10.1016/j.triboint.2009.12.056 ↗
44. Tribological properties of powder metallurgy - processed aluminium self lubricating hybrid composites with SiC additions10.1016/j.matdes.2012.09.015 ↗
45. Factorial experimental designs elucidate significant variables affecting data acquisition on a quadrupole orbitrap mass spectrometer10.1007/s13361-013-0693-y ↗
46. Fabrication and wear behavior of particulate reinforced metal matrix composites-an overview10.9790/1684-1401041020 ↗
47. Effect of the pin temperature and SiC reinforcement on dry sliding tribological behavior of aluminium based silicon carbide metal matrix composite (Al-SiC) using Taguchi approach10.1177/13506501221147367 ↗
48. Eiliat · 2015
49. Optimization of aging, coating temperature and reinforcement ratio on biosilica toughened in situ Al-TiB2 metal matrix composite: a taguchi grey relational approach10.1007/s12633-021-01232-y ↗
50. Parametric study on the dry sliding wear behaviour of AA6082–T6/TiB2 in situ composites using response surface methodology10.1007/s40430-018-1235-0 ↗
51. Study on effect of boron carbide, aluminium oxide and graphite on dry sliding wear behaviour of aluminium based metal matrix composite at different temperature
52. Analysis of dry sliding wear behaviour of Al6061/SiC/Al2O3 hybrid metal matrix composites10.1016/j.compositesb.2013.04.051 ↗
53. Mechanical and tribological behavior of particulate reinforced aluminum metal matrix composites—a review10.4236/jmmce.2011.101005 ↗
54. Hardness, friction and wear characteristics of nickel-SiC electroless composite deposits10.1016/S0257-8972(00)01088-4 ↗
55. Sklar · 2009
56. Recent progress in aluminum metal matrix composites: a review on processing, mechanical and wear properties10.1016/j.jmapro.2020.09.010 ↗
57. Effect of ZrB2 and fly ash on tribological and mechanical properties of aluminium 7075-based metal matrix composite at elevated temperatures in reciprocating motion
58. A systematic approach to model and optimize wear behaviour of castings produced by squeeze casting process10.1016/j.jmapro.2018.02.004 ↗
59. Field-emission scanning electron microscope as a tool for large-area and large-volume ultrastructural studies10.3390/ani11123390 ↗
60. Influence of secondary phase particles Al2O3/SiC on the microstructure and tribological characteristics of AA7075-based surface hybrid composites tailored using friction stir processing10.1177/0954406220932939 ↗
61. Microstructural characterization and experimental investigations into two body abrasive wear behavior of Al-7079/TiC in situ metal matrix composites10.1177/1350650119883559 ↗
62. Experimental investigation on tribological behaviour of Al-TiCp composite under sliding wear conditions10.1177/1350650115620110 ↗
63. Performance evaluation of hydrological models: statistical significance for reducing subjectivity in goodness-of-fit assessments10.1016/j.jhydrol.2012.12.004 ↗
64. Effect of SiC content on mechanical and tribological properties of Al2024-SiC Composites10.1007/s12633-020-00757-y ↗
65. Study on the mechanical and tribological performances of hybrid SiC-Al7075 metal matrix composites10.1016/j.jmrt.2020.02.002 ↗
66. Effect of different types of reinforcement on tribological properties of aluminium metal matrix composites (MMCs)—a review of recent studies10.1016/j.matpr.2021.12.211 ↗
67. Microstructure, texture, and mechanical properties analysis of novel AA7178/SiC nanocomposites10.1016/j.ceramint.2023.03.195 ↗
68. Role of different fractions of nano-size SiC and milling time on the microstructure and mechanical properties of Al–SiC nanocomposites10.1007/s12666-015-0606-9 ↗
69. Impact of aging temperature on the metallurgical and dry sliding wear behaviour of LM25 / Al2O3 metal matrix composite for automotive application
70. Current status on manufacturing routes to produce metal matrix composites: State-of-the-art10.1016/j.heliyon.2023.e13558 ↗