Post-weld friction stir processing of AA5083-F TIG welds with scandium added fillers
Source abstract
Abstract
Abstract TIG welded marine grade AA5083-F/ER5356 and AA5083-F/ER5356+Sc joints were friction stir processed with a pin less FSP tool, to explore the impact of the process parameters on the mechanical and metallurgical characteristics of the weldments and enhance the weld strength. The microstructure of the welds was observed using optical and SEM and subjected to mechanical tests like impact toughness, tensile, microhardness and fractography, to evaluate the strength of the weld. A microstructural improvement was observed in the FSPed weld joints, with an average grain size of 4 μm for TIG welds and 2 μm for Sc added TIG welds, in comparison to the TIG-welded joints, which showed an average grain size of 12 μm and 8 μm when Sc was added. The ultimate tensile strength (UTS) of the FSPed joints were higher than the tensile strength of the base metal, with values of 288 MPa for the FSPed joints and 331 MPa for the Sc added FSPed joints. The FSPed joint’s elongation range decreased to 7.1% but showed a marked improvement for the Sc added FSPed joints, up to 20.5%. There was a marked improvement in the maximum hardness compared to TIG welded joints, with the FSPed TIG-welded joints giving a value of 90 HV1, while the maximum hardness of Sc added FSP joints showing 95 HV1. The study revealed that FSPed and Sc added joints improved the mechanical and microstructural properties of the TIG welded joints significantly.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Taguchi optimization of pulsed current GTA welding parameters for improved corrosion resistance of 5083 aluminum welds10.1007/s11665-012-0346-5 ↗
2. HAZ softening behavior of strain-hardened Al-6.7Mg alloy welded by GMAW and pulsed GMAW processes10.1007/s00170-017-0318-x ↗
3. Formation mechanism of macrosegregation in dissimilar-filler welding of aluminum alloys10.1016/j.jmrt.2022.07.074 ↗
4. Investigation on the process parameters of TIG-welded aluminum alloy through mechanical and microstructural characterization10.1016/j.dt.2020.06.012 ↗
5. Microstructure and mechanical properties of aluminum 5083 weldments by gas tungsten arc and gas metal arc welding10.1016/j.msea.2012.03.108 ↗
6. The effect of gas tungsten arc welding and pulsed-gas tungsten arc welding processes’ parameters on the heat affected zone-softening behavior of strain-hardened Al-6.7Mg alloy10.1016/j.matdes.2013.09.061 ↗
7. Investigation of microstructure and mechanical properties of TIG and MIG welding using aluminium alloy10.9790/1684-130508121126 ↗
8. A study to enhance the depth of penetration in grade P91 steel plate using alumina as flux in FBTIG welding10.1007/s13369-017-2605-0 ↗
9. Effect of friction stir processing on mechanical properties and heat transfer of TIG welded joint of AA6061 and AA707510.1016/j.dt.2020.04.014 ↗
10. A review on effect of friction stir processing on the welded joints10.1016/j.matpr.2020.11.215 ↗
11. Microstructure of Al–Mg–Si weld joints produced by pulse TIG welding10.1080/10426910601015923 ↗
12. The effect of TIG welding parameters and automatization for non-heat-treated inconel 718 sheets10.1007/s13369-021-06000-z ↗
13. Mechanism of grain refinement: in aluminum alloys10.1007/BF03397424 ↗
14. Enhancement of mechanical properties of Al-Mg Alloy (AA5083-F) TIG welds by Sc addition.
15. Analysis of cooling media effects on microstructure and mechanical properties during FSW/UFSW of AA 6082-T610.1088/2053-1591/aab8e3 ↗
16. Influence of friction stir welding parameters on mechanical properties of dissimilar AA 7475 to AISI 30410.1088/1757-899X/802/1/012010 ↗
17. The effect of friction stir processing on 5083-H321/5356 Al Arc welds: microstructural and mechanical analysis10.1007/s11661-006-1055-1 ↗
18. Enhancing grain refinement and corrosion behavior in AZ31B magnesium alloy via stationary shoulder friction stir processing10.1016/j.jmrt.2022.02.059 ↗
19. Effect of friction stir processing on gas tungsten arc-welded and friction stir-welded 5083-H111 aluminium alloy joints10.1155/2019/3510236 ↗
20. Investigation of weld defects in friction-stir welding and fusion welding of aluminium alloys10.1186/s40712-015-0053-8 ↗
21. Effect of the processing parameters of friction stir processing on the microstructure and mechanical properties of 6063 aluminum alloy10.1016/j.msea.2019.02.064 ↗
22. The effect of the number of passes in friction stir processing of aluminum alloy (AA6082) and its failure analysis10.1016/j.apsusc.2019.06.132 ↗
23. Fatigue behaviour of AA6082-T6 MIG welded butt joints improved by friction stir processing10.1016/j.matdes.2013.04.026 ↗
24. Experimental investigation of bending and tensile strength of friction stir processed TIG-welded AA5083-H111 joint10.1088/2631-8695/abbd8b ↗
25. Improvement of tensile and impact properties of 5083 aluminium weldments using fillers containing nano-Al2O3 and post-weld friction stir processing10.17159/2411-9717/662/2020 ↗
26. Influence of friction stir welding parameters on dissimilar joints AA6061-T6 and AA5052-H3210.1007/s13369-021-05773-7 ↗
27. Fatigue life improvement by friction stir processing of 5083 aluminium alloy MIG butt welds10.1016/j.tafmec.2014.02.002 ↗
28. Examination of the effect of Sc on 2000 and 7000 series aluminium alloy castings: for improvements in fusion welding10.1016/S0921-5093(02)00942-5 ↗
29. Improvement of mechanical and microstructural properties of AA 5052-H32 TIG weldment using friction stir processing approach10.1016/j.jmrt.2022.05.015 ↗
30. Microstructural and mechanical properties of double-sided MIG, TIG and friction stir welded 5083-H321 aluminium alloy
31. Effects of Sc and Zr on mechanical property and microstructure of tungsten inert gas and friction stir welded aerospace high strength Al–Zn–Mg alloys10.1016/j.msea.2015.05.052 ↗
32. A novel approach to develop aluminum matrix nano-composite employing friction stir welding technique10.1016/j.matdes.2013.07.006 ↗
33. Charpy impact response of notched aluminum 5754-H111 of repaired with carbon/epoxy and e-glass/epoxy. Euro
34. A comparative analysis of tensile and impact-toughness behavior of cold-worked and annealed 7075 aluminum alloy10.1016/j.ijimpeng.2009.08.009 ↗
35. A simple fracture mechanics based charpy-V impact energy criterion for plastic collapse10.1016/j.engfracmech.2020.107247 ↗
36. MIG and TIG Joining of AA1070 Aluminium Sheets with Different Surface Preparations10.3390/ma15020412 ↗
37. Influence of cryocooling on friction stir processing of Al-5083 alloy10.1080/10426914.2019.1697442 ↗
38. High strain rate superplasticity in a friction stir processed 7075 Al alloy. Scrip10.1016/S1359-6462(99)00329-2 ↗
39. The origin of non-uniform microstructure and its effects on the mechanical properties of a friction stir processed Al–Mg alloy10.1016/j.actamat.2009.07.065 ↗
40. Fabrication of 5052Al/Al2O3 nanoceramic particle reinforced composite via friction stir processing route10.1016/j.matdes.2011.04.048 ↗
41. Effects of friction stir processing on mechanical properties of the cast aluminum alloys A319 and A35610.1016/j.scriptamat.2005.03.040 ↗
42. The effect of FSP conditions towards microstructure and mechanical properties of the AA6082/AA8011 TIG-welded joint10.1088/2053-1591/ac0735 ↗
43. Effects of cooling condition on microstructural evolution and mechanical properties of friction stir processed 2A14 aluminum alloy10.1088/2053-1591/ab429d ↗
44. Improved microstructure and mechanical properties in gas tungsten arc welded aluminum joints by using graphene nanosheets/aluminum composite filler wires10.1016/j.micron.2014.03.013 ↗