Tribological properties of Ni 3 Al matrix self-lubricating composites with a gradient composite structure prepared by laser melt deposition
Source abstract
Abstract
Abstract As the contact part of metal-matrix self-lubricating composites during sliding friction, the friction interface layer directly affects the tribological performance of the material. However, the formation of the friction interface layer with outstanding tribological performance is limited by the friction conditions during sliding friction. To address this problem, based on the antifriction and wear resistance mechanisms of the in situ formed friction interface layer of Ni 3 Al matrix self-lubricating composites (NMSCs) with homogeneous solid lubricant, Ni 3 Al matrix self-lubricating composites with a gradient composite structure (Ni 3 Al-GCS) were prepared via laser melt deposition, in which each component layer contained different contents of Sn-Ag-Cu and Ti 3 SiC 2 . Dry sliding friction tests of Ni 3 Al-GCS against GCr15 steel balls were performed under different loading conditions. The results showed that the tribological performances of Ni 3 Al-GCS in the range of 4–16 N were less affected by the variation of the loading conditions than those of NMSCs. The gradient composite structure of Ni 3 Al-GCS could reduce the dependence of the tribological behavior on the friction conditions, resulting in excellent antifriction and wear resistance of Ni 3 Al-GCS in a wide load range. In addition, the gradient composite structure could reduce the sliding contact damage of the friction contact surface of Ni 3 Al-GCS, and contribute to the formation of friction interface layer rich in the lubrication phase and oxides, thus improving the tribological performance of Ni 3 Al-GCS during sliding friction. This study provides new approaches for the tribological design of metal-matrix self-lubricating composites in a wide load range.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Tribology and Wear Analysis · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Mechanical and tribological properties of NiAl/muscovite composites10.1016/j.jallcom.2018.01.169 ↗
2. A comparative study on torsional fretting and torsional sliding wear of CuNiAl under different lubricated conditions10.1016/j.triboint.2017.08.017 ↗
3. Effect of different microporous parameters on mechanical and frictional properties of M50 self-lubricating materials: simulation analysis and experimental study10.1088/2053-1591/ab00b3 ↗
4. Effects of friction layer characteristics on the tribological properties of Ni3Al solid-lubricating composites at different load conditions10.1088/2053-1591/aac41f ↗
5. The synergistic lubricating mechanism of Sn-Ag-Cu and C60 on the worn surface of M50 self-lubricating material at elevated loads10.1016/j.jallcom.2018.11.021 ↗
6. Investigation of the friction layer of Ni3Al matrix composites10.1016/j.wear.2015.01.040 ↗
7. Influence of subsurface micro/nano structural evolution on macroscopic tribological behavior of Ni3Al matrix composites10.1007/s11249-014-0458-1 ↗
8. Effects of friction layer thickness on the tribological performance of Ni3Al-Ag-MoO310.1007/s11665-017-2661-3 ↗
9. Investigation of mechanical and tribological behaviors of multilayer graphene reinforced Ni3Al matrix composites10.1016/j.compositesb.2014.10.052 ↗
10. Preparation and tribological properties of TiAl matrix composites reinforced by multilayer graphene10.1016/j.carbon.2013.09.077 ↗
11. Tribological performance of Ni3Al matrix composites with MoO3 tabular crystal under different sliding speed10.1016/j.matchemphys.2017.07.067 ↗
12. Effect of counterface balls on the friction layer of Ni3Al matrix composites with 15 wt% graphene nanoplatelets10.1007/s11249-014-0362-8 ↗
13. Graded materials for resistance to contact deformation and damage10.1126/science.1059716 ↗
14. Chen · 2015
15. Microstructure, tribological behavior, and strengthening mechanisms of the friction interface layer with nanocrystalline structure of Ni3Al matrix self-lubricating composites10.1007/s11665-020-04881-z ↗
16. Effects of surface composite structure with micro-grooves and Sn-Ag-Cu on reducing friction and wear of Ni3Al alloys10.1016/j.surfcoat.2020.125540 ↗
17. Applications of Ni3Al based intermetallic alloys-current stage and potential perceptivities10.3390/ma8052537 ↗
18. Investigation of the preparation and tribological behavior of a frictional interface covered with sinusoidal microchannels containing SnAgCu and Ti3SiC210.1016/j.triboint.2020.106368 ↗
19. The self-lubricating behavior and evolution mechanisms of the surface microporous friction interface of M50-(Sn-Ag-Cu) material10.1016/j.jmrt.2020.05.095 ↗
20. Friction and wear behaviors of TC4 alloy with surface microporous channels filled by Sn-Ag-Cu and Al2O3 nanoparticles10.1016/j.surfcoat.2020.125552 ↗
21. Study of the interfacial reaction between Ti3SiC2 particles and Al matrix10.1016/j.jallcom.2017.12.123 ↗
22. Effect of Ag and Ti3SiC2 on tribological properties of TiAl matrix self-lubricating composites at room and increased temperatures10.1007/s11249-014-0299-y ↗
23. Multiscale metallic metamaterials10.1038/nmat4694 ↗
24. Fabrication of fillable microparticles and other complex 3D microstructures10.1126/science.aaf7447 ↗
25. Additive manufacturing of isotropic-grained, high-strength and high-ductility copper alloys10.1016/j.addma.2020.101751 ↗
26. Tribological performance of functionally gradient structure of graphene nanoplatelets reinforced Ni3Al metal matrix composites prepared by laser melting deposition10.1016/j.wear.2019.04.009 ↗
27. Effects of functionally gradient structure of Ni3Al metal matrix self-lubrication composites on friction-induced vibration and noise and wear behaviors10.1016/j.triboint.2019.02.037 ↗
28. Anti-friction and wear properties of the friction surface of M50-10 wt%(50Sn40Ag10Cu) composite10.1016/j.jallcom.2018.06.160 ↗
29. Effect of Ti3SiC2 content on tribological behavior of Ni3Al matrix self-lubricating composites from 25 to 800 °C10.1007/s11665-014-0892-0 ↗
30. Tribological performance of Ni3Al matrix composites synthesized by laser melt deposition under different scanning velocities10.1007/s11665-018-3252-7 ↗
31. Tribological performance of Ni3Al matrix self-lubricating composites containing multilayer graphene prepared by additive manufacturing10.1007/s11665-017-3094-8 ↗
32. Design and preparation of gradient graphite/cermets self-lubricating composites10.1016/j.jmst.2017.09.018 ↗
33. Li · 2018
34. The effect of deposition conditions on adhesion strength of Ti and Ti6Al4V cold spray splats, journal of thermal spray technology10.1007/s11666-011-9720-3 ↗
35. Yuan · 2005
36. Wang · 2013
37. Effect of elastic and plastic deformations on tribological behavior of graphenereinforced Ni3Al matrix composites
38. Effect of graphene nanoplate addition on the tribological performance of Ni3Al matrix composites10.1177/0021998313513048 ↗
39. Analysis on friction and wear characteristics and transfer film formation mechanism of Si3N4/PTEE under dry friction condition
40. Tribological properties and self-compensating lubrication mechanisms of Ni3Al matrix bio-inspired shell-like composite structure10.1016/j.apsusc.2021.151462 ↗
41. An XPS study of dispersion and chemical state of MoO3 on Al2O3-TiO2 binary oxide support10.1016/S0926-860X(00)00906-6 ↗
42. Influence of the amount of titania on the texture and structure of titania supported on silica10.1006/jcat.1996.0214 ↗
43. Angle-resolved X-ray photoelectron spectroscopy (ARXPS) and a modified Levenberg-Marquardt fit procedure: a new combination for modeling thin layers10.1016/0169-4332(90)90018-U ↗
44. XPS study of the surface composition modification of nc-TiC/C nanocomposite films under in situ argon ion bombardment10.1016/j.tsf.2011.01.200 ↗
45. Tribological behavior and self-healing functionality of M50 material covered with surface micropores filled with Sn-Ag-Cu10.1016/j.triboint.2018.07.050 ↗
46. Research on the thickness of the friction layer of Ni3Al matrix composites with graphene nanoplatelets10.1007/s11249-015-0568-4 ↗
47. Recent progress on wear-resistant materials: designs, properties and applications10.1002/advs.202003739 ↗