Effect of thermal deformation and Nb element action on the organization and performance of steel
Source abstract
Abstract
Abstract The influences of Nb element and hot deformation on the strength of steels were systematically investigated. The microstructures and mechanical properties of the steels are determined through optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and tensile tests. The nanometer sized carbide particles precipitated in the grain boundary are attributed mainly to severe deformation at high temperature. Of the two steels with different content of Nb element and deformation, the strength of 2 # steel is more lager due to more content of Nb can form more precipitates to limit grains growth. Furthermore, the results also shown that adding Nb can refine the microstructure of the steel and effectively improve the mechanical properties, but only thermal deformation has no obvious effect on the improvement of the properties of the steel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Optimization of strength and toughness of railway wheel steel by alloy design10.1016/j.matdes.2015.12.096 ↗
2. Mechanical properties and microstructure of X120 grade high strength pipeline steel10.1016/S1006-706X(10)60185-9 ↗
3. Microstructural characterization of an as-quenched HSLA-100 plate steel via transmission electron microscopy10.1016/j.matchar.2013.01.002 ↗
4. Development of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides10.2355/isijinternational.44.1945 ↗
5. The inflfluence of microstructure on the rolling contact fatigue of steel for high-speed-train wheel10.1016/j.wear.2015.10.002 ↗
6. Effect of different strengthening methods on rolling/sliding wear of ferrite–pearlite steel10.1016/j.wear.2016.04.003 ↗
7. Design of double composite using high strength steel10.1016/j.proeng.2011.07.229 ↗
8. Strengthening mechanism of hot rolled Ti and Nb microalloyed HSLA steels containing Mo and W with various coiling temperature10.1016/j.msea.2012.09.098 ↗
9. Effects of transformation temperature on VC interphase precipitation and resultant hardness in low carbon steels10.1016/j.actamat.2014.10.049 ↗
10. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
11. The role of microstructure on the strength and toughness of fully pearlitic steels10.1007/BF02656606 ↗
12. Microstructure and strengthening mechanisms in cold-drawn pearlitic steel wire10.1016/j.actamat.2011.02.017 ↗
13. Calculation of ductility from pearlite microstructure10.1080/02670836.2017.1418476 ↗
14. Resolving the morphology of niobium carbonitride nano-precipitates in steel using atom probe tomography10.1017/S1431927614012872 ↗
15. Suppression of strain-induced precipitation of NbC by epitaxial growth of NbC on pre-existing TiN in Nb-Ti microalloyed steel10.1016/j.matdes.2017.07.006 ↗
16. Optimization of mechanical properties of high-carbon pearlitic steels with Si and V additions10.1007/s11661-001-0222-7 ↗
17. Anisotropic deformation characteristics of an ultrafifine- and nanolamellar pearlitic steel10.1016/j.actamat.2015.12.037 ↗
18. Characterization of pearlite morphology and associated micro-cracks in EN9 grade carbon steel by atomic force microscopy10.4028/www.scientific.net/AMR.585.67 ↗
19. Development of SP3 rail with high wear resistance and rolling contact fatigue resistance for heavy haul railways
20. Gladman · 1997
21. Quantitative three-dimensional characterization of pearlite spheroidization10.1016/j.actamat.2010.05.023 ↗