Weld metal fracture characterization of API X65 steel using drop weight tear test
Source abstract
Abstract
Measurement of fracture energy using drop weight tear test (DWTT) specimen with large dimensions (as an alternative to small Charpy test sample) gives more realistic results. Although large amounts of test data are available from DWTT experiments on different pipeline steels (base metal), apparently no information has been reported for fracture energy of welded seam of these pipe steels. In the current study, the fracture energy of spirally welded steel pipe was measured using DWTT specimens with two different notches (i.e. pressed and with chevron notch) and compared with base metal (BM) fracture energy. The test samples were machined from an actual gas pipe with a spiral seam having 1219 mm outside diameter and 14.3 mm wall thickness. The DWT tests were conducted on an impact machine with 30 kJ capacity equipped with Wheatstone load-cell. The measured total fracture energy in pressed-notch (PN) specimen (6211 J) was around 5% higher than that of chevron-notch (CN) specimen (5890 J). Based on the measurements, in both specimens a correction factor of 1.8 was suggested for welded seam (the fracture initiation energy was around 43% of the total fracture energy). Since the test samples were taken from a real pipe with original thickness, this result was more realistic than those previously reported for conventional Charpy fracture test specimens for similar steel material. The fracture energies for weld metal (WM) specifications were less than that of the base metal (7085 J). Therefore, immediate attention must be paid to DWTTs of WM in pipelines, which had not been investigated before, and the results indicate the importance of urgent improvement of the toughness of welded zone in manufacturing processes, which requires further research. Since, there is no standard for WM in the DWTT, the results of this research can lead to the development of new standards based on WM DWTT.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Hara T · 8th Int. Pipeline Conf. (IPC2010) · 2010 · 321
2. George EJr · Mechanical Metallurgy · 1961 · 370
3. Maxey W A · 5th Symp. on Line Pipe · 1974
4. 10.1016/j.msea.2016.04.07310.1016/j.msea.2016.04.073 ↗
5. 10.1007/s11661-011-0697-910.1007/s11661-011-0697-9 ↗
6. 10.1115/IPC2002-2713210.1115/IPC2002-27132 ↗
7. Shim D J · 8th Int. Pipeline Conf. (IPC2010) · 2010 · 539
8. 10.1016/j.mspro.2014.06.31510.1016/j.mspro.2014.06.315 ↗
9. 10.1016/S0013-7944(02)00138-810.1016/S0013-7944(02)00138-8 ↗
10. 10.1016/j.engfracmech.2014.01.00910.1016/j.engfracmech.2014.01.009 ↗
11. Pussegoda L N · 6th Int. Pipeline Conf. (IPC2006) · 2006 · 20110.1115/IPC2006-10231 ↗
12. Leis B N · 2th Int. Pipeline Conf. (IPC’98) · 1998 · 723
13. Wilkowski G · 6th Int. Pipeline Conf. (IPC2006) · 2006 · 36910.1115/IPC2006-10350 ↗
14. Fearnehough G D · Dynamic Fracture Toughness Conf. · 1976 · 315
15. 10.1016/j.engfracmech.2014.04.03110.1016/j.engfracmech.2014.04.031 ↗
16. 10.1016/j.msea.2003.09.07510.1016/j.msea.2003.09.075 ↗
17. 10.1016/j.engfracmech.2016.04.00710.1016/j.engfracmech.2016.04.007 ↗
18. 10.1016/j.jmapro.2017.09.02810.1016/j.jmapro.2017.09.028 ↗
19. Wolodko J · 6th Int. Pipeline Conf. (IPC2006) · 2006 · 11510.1115/IPC2006-10110 ↗
20. 10.1016/j.ijpvp.2009.01.01110.1016/j.ijpvp.2009.01.011 ↗
21. 10.1016/j.msea.2006.03.02610.1016/j.msea.2006.03.026 ↗
22. 10.1016/j.ijpvp.2012.05.01110.1016/j.ijpvp.2012.05.011 ↗
23. 10.1016/j.engfailanal.2017.04.00710.1016/j.engfailanal.2017.04.007 ↗
24. 10.1016/j.engfracmech.2013.08.00910.1016/j.engfracmech.2013.08.009 ↗
25. 10.1016/j.prostr.2016.06.05510.1016/j.prostr.2016.06.055 ↗
26. Di Biagio M · 9th Int. Pipeline Conf. (IPC2012) · 2012 · 55310.1115/IPC2012-90614 ↗
27. 10.1179/cmq.1980.19.1.5910.1179/cmq.1980.19.1.59 ↗
28. 10.1520/JTE11763J10.1520/JTE11763J ↗
29. 10.1016/j.engfracmech.2004.03.01010.1016/j.engfracmech.2004.03.010 ↗
30. 10.1016/j.ijpvp.2008.04.01110.1016/j.ijpvp.2008.04.011 ↗