Critical condition parameters and kinetics of dynamic recrystallization for hot deformed 1 wt%Cr-1 wt%Mo rotor steel
Source abstract
Abstract
Abstract Isothermal hot compression tests of low alloy 1 wt%Cr–1 wt%Mo medium carbon rotor steel were carried out over the temperature range from 850 °C–1050 °C under three strain rates (\overset{̇}{ε}) varying from 0.001 s−1–0.1.1 s−1. The hot deformation behavior, activation energy and material constants were determined by constitutive analysis. Onset of critical condition parameters for dynamic recrystallization (DRX) of the present steel were determined with the help of mathematical models developed by Poliak and Jonas. DRX kinetics were studied to determine the fraction of dynamic recrystallization with the help of Avrami type model. Also, the values of Avrami power exponent (n) and material constant (K) were calculated for Avrami equation in each deformation condition. Optical and scanning electron (SEM) micrographs of the as-received and the deformed specimens were analyzed to understand the flow stress behavior of this steel.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A critical review of precipitation behaviour in LCr-Mo-V rotor steels tempering results in some coarsening and spner oidization of M, C [7], and a feathery lath-like a10.1016/0025-5416(88)90516-2 ↗
2. Effect of strain rate on the microstructural development through continuous dynamic recrystallization in a microalloyed steel10.1016/j.msea.2010.01.077 ↗
3. Characterization of austenite dynamic recrystallization under different Z parameters in a microalloyed Steel10.1016/S1005-0302(11)60074-1 ↗
4. Determination of critical conditions for initiation of dynamic recrystallization by new method10.1080/10426914.2013.832304 ↗
5. Dynamic softening mechanisms in 30410.1179/cmq.1990.29.2.147 ↗
6. Overview dynamic recrystallization: mechanical and microstructural considerations10.1016/0001-6160(84)90049-X ↗
7. Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation10.1016/0001-6160(69)90049-2 ↗
8. Kinetics and critical conditions for the initiation of dynamic recrystallization in 304 stainless steel10.2355/isijinternational.44.1581 ↗
9. Determination of critical strain for initiation of dynamic recrystallization10.1016/j.matdes.2009.09.001 ↗
10. Determination of critical conditions for dynamic recrystallization of a microalloyed steel10.1016/j.msea.2010.03.086 ↗
11. Initiation of dynamic recrystallization in constant strain rate hot deformation10.2355/isijinternational.43.684 ↗
12. A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization10.1016/1359-6454(95)00146-7 ↗
13. Predicting the critical stress for initiation of dynamic recrystallization10.2355/isijinternational.46.1679 ↗
14. A modeling dynamic recrystallization during hot deformation of a cast-homogenized Mg–Zn–Zr alloy10.1016/j.msea.2018.02.064 ↗
15. Study on constitutive modeling and processing maps for hot deformation of medium carbon Cr–Ni–Mo alloyed steel10.1016/j.matdes.2015.11.036 ↗
16. Effect of microalloy precipitates on the microstructure and texture of hot-deformed modified 9Cr–1Mo steel10.1007/s11661-017-4039-4 ↗
17. Hot-compression response of solution-treated Al–Mg–Si alloy10.1007/s11665-019-04459-4 ↗
18. Hot compression deformation and constitutive modeling of GH4698 alloy10.1016/j.matdes.2014.08.045 ↗
19. Materials science & engineering a hot deformation behavior and microstructure evolution of a stabilized high-Cr ferritic stainless steel10.1016/j.msea.2013.01.077 ↗
20. Constitutive analysis in hot working10.1016/S0921-5093(01)01117-0 ↗
21. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
22. Hot deformation behavior and dynamic recrystallization characteristics of 12Cr ultra-super-critical rotor steel10.1007/s12540-019-00253-y ↗
23. Hot deformation behavior and dynamic recrystallization characteristics in a low-alloy high-strength Ni–Cr–Mo–V steel10.1007/s40195-018-0729-1 ↗
24. Constitutive modeling for flow behavior of GCr15 steel under hot compression experiments10.1016/j.matdes.2012.07.009 ↗
25. Effect of alloying on the self-diffusion activation energy in γ-iron10.1134/S1063783411110308 ↗
26. Modelling of flow stress and prediction of workability by processing map for hot compression of 43CrNi steel10.2355/isijinternational.ISIJINT-2016-306 ↗
27. Determination of the critical parameters for the onset of dynamic recrystallization (DRX) in advanced ultrahigh strength steels (A-UHSS) microalloyed with boron
28. Determination of the critical conditions for the initiation of dynamic recrystallization in boron microalloyed steels10.1016/j.msea.2011.01.102 ↗
29. Hot deformation behavior of a medium carbon microalloyed steel10.1016/j.msea.2011.01.098 ↗
30. Flow behaviour of TiHy 600 alloy under hot deformation using gleeble 380010.1080/2374068X.2017.1342065 ↗
31. Deformation behaviour and dynamic recrystallization of AZ61 magnesium alloy10.1016/j.jallcom.2013.05.082 ↗
32. Hot deformation and dynamic recrystallization behavior of austenite-based low-density Fe–Mn–Al–C steel10.1007/s40195-016-0406-1 ↗