Microstructural and tribological characterization of niobium boride coating produced on AISI 1020 steel via multicomponent boriding
Source abstract
Abstract
Abstract Niobium boride coating was produced on AISI 1020 steel by multicomponent boriding process. Boriding treatment at1000 °C for 4 h was followed by thermo-reactive diffusion technique at 1000 °C for 6 h under argon atmosphere. Microabrasive wear tests were carried out using SiC abrasive particles at slurry concentrations of 0.5 and 1.0 g cm−3. Normal loads of 0.49 and 0.98 N were used. NbB and Nb5B6 phases were identified by XRD analysis. The niobium boride coating thickness was 2.0 ± 0.5 μm and its hardness was 1360 ± 200 HK0.01. Owing to the presence of a porous region on the niobium/iron boride layers the abrasive wear resistance decreased comparing to the borided and untreated AISI 1020 steel. Rolling abrasion was the main wear mechanism observed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Dry sliding wear behaviour of medium carbon steel against an alumina disk10.1016/j.wear.2010.12.007 ↗
2. A study of the wear performance of duplex treated commercial low-alloy steel against alumina and WC balls, Surf10.1016/j.surfcoat.2014.10.042 ↗
3. Mechanical properties of paste carburized ASTM A516 Steel10.1016/j.proeng.2013.12.216 ↗
4. Wear and corrosion resistance of niobium-chromium carbide coatings on AISI D2 produced through TRD10.1016/j.surfcoat.2014.05.069 ↗
5. Niobium boride coating on the surface of AISI 1010 by a duplex treatment
6. Evaluation of vanadium carbide coatings on AISI H13 obtained by thermo-reactive deposition/diffusion technique10.1016/j.surfcoat.2010.07.065 ↗
7. Cr(N,C) diffusion coating formation on pre-nitrocarburised H13 tool steel10.1016/S0257-8972(03)00791-6 ↗
8. Formation of chromium nitride layers on AISI 1010 steel by nitro-chromizing treatment10.1016/j.vacuum.2006.07.002 ↗
9. Boroaluminide coatings on ferritic–martensitic steel deposited by low-temperature pack cementation10.1016/j.surfcoat.2007.11.034 ↗
10. Structural properties and kinetics of nitro-niobized steels10.1007/s10853-011-5758-3 ↗
11. Vanadium boride coatings on steel10.1016/S0921-5093(99)00596-1 ↗
12. Evaluation of microstructures and wear properties of duplex boride coatings10.1179/174328408X374667 ↗
13. Boriding (boronizing) of steels
14. Formation of multi-component boronization by adding transition metal group VIB10.1016/j.solidstatesciences.2012.06.008 ↗
15. The effect of boronizing and boro-chromizing on tribological performance of AISI 52100 bearing steels10.1108/00368790910953668 ↗
16. Boron-aluminide coatings applied by pack cementation method on low-alloy steels10.1016/S0167-577X(01)00515-8 ↗
17. The characterization of vanadium boride coatings on AISI 8620 steel10.1016/j.surfcoat.2004.07.120 ↗
18. Niobium boride coating on AISI M2 steel by boro-niobizing treatment10.1016/j.matlet.2007.12.042 ↗
19. A study of chromo-boronizing on DIN 1.2714 steel by duplex surface treatment10.1007/s11837-012-0337-x ↗
20. Preparation of borides in Nb–B and Cr–B systems by combustion synthesis involving borothermic reduction of Nb2O5 and Cr2O310.1016/j.jallcom.2009.10.007 ↗
21. A comparative study of borided pure niobium, tungsten and chromium10.1016/j.vacuum.2006.01.036 ↗
22. Tribological investigation of tantalum boride coating under dry and simulated body fluid conditions10.1016/j.wear.2007.01.009 ↗
23. Effect of borotitanizing on microstructure and wear behavior of Inconel 62510.1016/j.surfcoat.2016.12.097 ↗
24. Experimental investigations on the effects of multicomponent laser boriding on steels10.1016/j.matpr.2018.10.330 ↗
25. Combined treatment plasma electrolytic carburizing and borocarburizing on Q235 low-carbon steel10.1016/j.matchemphys.2018.09.011 ↗
26. Boro-nitriding coating on pure iron by powder-pack boriding and nitriding processes10.1016/j.matlet.2016.04.135 ↗
27. Characterization of different surface layers produced by solid boron-nitro-carburizing thermochemical treatment on AISI 102010.1590/1980-5373-mr-2019-0316 ↗
28. Micro-abrasive wear mechanisms of borided AISI 1020 steel10.1016/j.triboint.2017.03.017 ↗
29. Plasma paste boronizing of AISI 8620, 52100 and 440C steels10.1016/j.matdes.2010.11.031 ↗
30. The characterization of borided pure niobium10.1016/j.surfcoat.2004.06.040 ↗
31. Effects of boronizing on mechanical and dry-sliding wear properties of CoCrMo alloy10.1016/j.matdes.2010.03.024 ↗
32. The formation of diffusion coatings on some low-alloy steels and their high temperature oxidation behaviour: Part 1 Diffusion Coatings10.1016/S0364-5916(02)00015-9 ↗
33. A review of some aspects concerning the formation of metallic diffusion coatings on ferrous metals10.1016/S0010-938X(69)80075-2 ↗
34. Neumann · 200910.1016/S1470-1804(08)00015-1 ↗
35. Study of microcracks morphology produced by Vickers indentation on AISI 1045 borided steels10.1016/j.msea.2007.04.052 ↗
36. Effects of boronizing process on the surface roughness and dimensions of AISI 1020, AISI 1040 and AISI 271410.1016/j.jmatprotec.2008.04.040 ↗
37. Tribological behaviour of borided H13 steel with different boriding agents10.1179/1743294414Y.0000000423 ↗
38. Roughness parameters10.1016/S0924-0136(02)00060-2 ↗
39. Effect of laser surface modification on the micro-abrasive wear resistance of coated cemented carbide tools10.1016/j.wear.2013.01.035 ↗
40. Influence of heat treatments on the micro-abrasion wear resistance of a superduplex stainless steel10.1016/j.wear.2010.12.087 ↗
41. Ball cratering test on ductile materials10.1016/j.wear.2011.03.013 ↗
42. Grooving micro-abrasion of polyamide 11 coated carbon steel tubulars for downhole application10.1016/S0043-1648(03)00226-6 ↗
43. Optimum tests conditions for attaining uniform rolling abrasion in ball cratering tests on hard coatings10.1016/j.wear.2004.09.018 ↗
44. Characterisation of duplex and non-duplex (Ti, Al)N and Cr–N PVD coatings10.1016/S0921-5093(01)01953-0 ↗
45. Duplex surface treatment of AISI 1045 steel via plasma nitriding of chromized layer10.1016/j.tsf.2011.04.054 ↗
46. Investigation of borided layers contribution on the wear resistance and adhesion of TiN coatings10.1590/s1517-707620170001.0119 ↗
47. Sliding wear of borided sintered AISI M2 steel coated with AlTiN/CrN multilayer10.1016/j.wear.2018.05.025 ↗
48. Micro-scale abrasive wear testing of duplex and non-duplex (single-layered) PVD (Ti,Al)N, TiN and Cr–N coatings10.1016/S0301-679X(02)00017-8 ↗
49. Characterization and determination of FexB layers’ mechanical properties10.1016/j.jmatprotec.2007.12.020 ↗
50. Research on wear characteristics of AISI 1035 steel boronized at various parameters10.1108/00368791111116366 ↗
51. Effect of boronizing on the oxidation of niobium10.1016/j.ijrmhm.2013.04.014 ↗
52. Wear-mode mapping for the micro-scale abrasion test10.1016/S0043-1648(03)00073-5 ↗
53. Three-body abrasive wear testing of soft materials10.1016/S0043-1648(99)00183-0 ↗
54. Effect of sliding distance on abrasive wear10.1016/j.jmrt.2014.10.007 ↗
55. Relationship between test severity and wear mode transition in micro-abrasive wear tests10.1016/j.wear.2007.01.099 ↗
56. Analysis of perforating and non-perforating micro-scale abrasion tests on coated substrates10.1016/j.surfcoat.2005.01.015 ↗
57. Effect of load partition and particle distribution on micro-abrasive wear mapping of two-phase metal matrix composites10.1016/j.wear.2012.11.080 ↗
58. Transitions between two-body and three-body abrasive wear: influence of test conditions in the microscale abrasive wear test10.1016/S0043-1648(98)00358-5 ↗
59. Micro-abrasion transitions of metallic materials10.1016/S0043-1648(03)00204-7 ↗