Surface roughness, wear and thermal conductivity of ternary electroless Ni–Ag–P coating on copper substrate
Source abstract
Abstract
Abstract Thermal testing tool used in electronic industries requires a high thermal conductivity and wear resistant coating to ensure efficient thermal transfer over some period of testing cycles. A study on ternary nickel-silver-phosphorus (Ni–Ag–P) coating was carried out by adding silver sulphate into electroless nickel-phosphorus (Ni–P) bath solution with a target to improve thermal conductivity. The results showed that silver can be co-deposited into Ni–P coating but in limited concentration without causing bath decomposition. Cethyltrimethyl ammonium bromide (CTAB) were added into the bath solution as surfactant to improve the coating surface morphology and roughness. Characterization of coatings were done using atomic force microscope (AFM), scanning electron microscope (SEM), energy dispersive x-ray (EDX), optical microscope, Knoop microhardness tester, pin-on-disc wear tester and hot disk thermal analyser. When the concentration of silver sulphate added was low, coating produced have smoother surface with improved thickness, hardness and wear resistance. Higher concentration of silver sulphate led to bath decomposition thus coatings have rougher surface with reduced thickness, hardness and wear resistance. Thermal conductivity test showed increment in the thermal conductivity value of Ni–P coating from 445.7 W m−1.K to 466.9 W m−1.K with addition of 10 mg l−1 silver sulphate. It is found that co-deposition of silver at low concentration can improve the hardness, wear resistance and thermal conductivity, and as comparable thickness value is possible, ternary Ni–Ag–P showed interesting potential to replace current NiP coating used in thermal testing tool.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Semiconductor materials and interfaces · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Efficacy of reducing agent and surfactant contacting pattern on the performance characteristics of nickel electroless plating baths coupled with and without ultrasound10.1016/j.ultsonch.2014.01.015 ↗
2. Novel investigation on tribological properties of Ni–P–Ag–Al2O3 hybrid nanocomposite coatings10.1016/j.triboint.2013.01.022 ↗
3. Electroless ternary Ni-W-P alloys containing micron size Al2O3 particles10.1016/j.surfcoat.2010.07.047 ↗
4. Electrochemical studies on electroless ternary and quaternary Ni–P based alloys10.1016/j.electacta.2006.07.001 ↗
5. Microstructural characterization and corrosion behavior of electroless Ni-Zn-P thin films10.1155/2014/827393 ↗
6. Effect of surfactants on the behavior of the Ni–P bath and on the formation of electroless Ni–P–TiC composite coatings10.1016/j.surfcoat.2019.01.046 ↗
7. Effect of surfactants on the mechanical properties of electroless (Ni–P) coating10.1016/j.surfcoat.2008.08.021 ↗
8. The influence of SDS and CTAB surfactants on the surface morphology and surface topography of electroless Ni—P10.1016/j.jmatprotec.2008.01.057 ↗
9. Electroless deposition and some properties of Ni-Cu-P and Ni-Sn-P coatings10.1007/s10008-007-0276-6 ↗
10. Three-body abrasive wear of hard coatings: Effects of hardness and roughness10.1016/j.tsf.2018.07.052 ↗
11. Effects of surfactants on electrodeposition of nickel-carbon nanotubes composite coatings10.1016/j.surfcoat.2007.12.005 ↗
12. Mechanism of electroless deposition of Ni-W-P alloys by adding surfactants10.1002/sia.1562 ↗
13. Effect of complexing agent on the morphology and microstructure of electroless deposited Ni–P alloy10.1016/j.surfcoat.2006.07.189 ↗
14. Friction and wear behavior of electroless Ni–P–W coating exposed to elevated temperature10.1016/j.surfin.2018.12.007 ↗
15. Effect of CTAB concentration in the electrolyte on the tribological properties of nanoparticle SiC reinforced Ni metal matrix composite (MMC) coatings produced by electrodeposition10.1016/j.colsurfa.2012.11.048 ↗
16. Corrosion resistance of ternary Ni–P based alloys in sulfuric acid solutions10.1016/S0013-4686(02)00198-6 ↗
17. Study on the nano-composite electroless coating of Ni–P/Ag10.1016/j.jallcom.2008.06.057 ↗
18. Correlation between coefficient of friction and surface roughness in dry sliding wear of AISI 316 L (N) stainless steel at elevated temperatures
19. Impact of the surface roughness description on the electrical contact resistance of ohmic switches under low actuation forces10.1109/TCPMT.2011.2108655 ↗
20. Corrosion and wear properties of Ni-Sn-P ternary deposits on mild steel via electroless method10.1016/j.aej.2016.06.018 ↗
21. Electrodeposition of nickel/SiC composites in the presence of cetyltrimethylammonium bromide10.1016/j.apsusc.2010.05.082 ↗
22. Tribology of electroless nickel coatings—a review10.1016/j.matdes.2010.11.013 ↗
23. Corrosion resistance enhancement of AZ91D magnesium alloy by electroless Ni-Co-P coating and Ni-Co-P-SiO2 nanocomposite10.1007/s11665-014-1210-6 ↗
24. Electroless nickel, alloy, composite and nano coatings—A critical review10.1016/j.jallcom.2013.03.107 ↗
25. The performance of surfactant on the surface characteristics of electroless nickel coating on magnesium alloy10.1016/j.porgcoat.2011.10.022 ↗
26. Optimization of electroless Ni-Zn-P deposition process : experimental study and mathematical modeling10.1016/j.electacta.2004.01.035 ↗
27. Preparation andmagnetic properties of Ni-Co-P-Ce coating by electroless plating on silicon substrate10.1016/j.tsf.2017.04.038 ↗