journal article·2012-05

High permittivity and low dielectric loss of Na0.5Bi0.5−xLaxCu3Ti4O12 ceramics

Zupei Yang, Hongmei Ren, Xiaolian Chao, Pengfei Liang

Materials Research Bulletin· Volume 47· Issue 5
Publisher page

Abstract

Abstract The phase structure, microstructure and dielectric properties of Na 0.5 Bi 0.5− x La x Cu 3 Ti 4 O 12 (NBLCTO) ceramics were investigated. La 3+ substitution had a great influence on the phase structure and dielectric properties. The results showed that the pure phase could be more easily obtained when substituting La 3+ for Bi 3+ . Under the same processing condition (970 °C for 7.5 h) and measuring condition (10 kHz around room temperature), NBLCTO ceramics with x = 0.10 possessed the highest permittivity (1.02 × 10 4 ) and lowest dielectric loss (0.022). The obtained NBLCTO ceramics with x = 0.10 also had good frequency stability and good temperature stability (−1.87% to +3.27%) from −60 °C to 120 °C at both 1 and 10 kHz. Complex impedance results revealed that the grain resistance R g was 7.18 Ω cm and the grain boundary resistance R gb was 1.19 × 10 6 Ω cm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dielectric properties of ceramics · Ferroelectric and Piezoelectric Materials · Multiferroics and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Homes · Science · 2001 · 121 · 625
2. Subramanian · J. Solid State Chem. · 2000 · 151 · 32310.1006/jssc.2000.8703 ↗
3. Subramanian · Solid State Sci. · 2002 · 4 · 34710.1016/S1293-2558(01)01262-6 ↗
4. Homes · Phys. Rev. B · 2003 · 67 · 09210610.1103/PhysRevB.67.092106 ↗
5. Ramirez · Solid State Commun. · 2000 · 115 · 21710.1016/S0038-1098(00)00182-4 ↗
6. Ferrarelli · Appl. Phys. Lett. · 2006 · 89 · 21290410.1063/1.2388251 ↗
7. Ren · Mater. Res. Bull. · 2010 · 45 · 160810.1016/j.materresbull.2010.07.018 ↗
8. Ferrarelli · Appl. Phys. Lett. · 2009 · 94 · 21290110.1063/1.3134488 ↗
9. Shao · Appl. Phys. Lett. · 2007 · 91 · 04290510.1063/1.2762293 ↗
10. Morrison · Int. J. Inorg. Mater. · 2001 · 3 · 120510.1016/S1466-6049(01)00128-3 ↗
11. Wang · J. Alloys Compd. · 2010 · 491 · 42310.1016/j.jallcom.2009.10.216 ↗
12. Li · J. Mater. Sci. · 2009 · 44 · 614910.1007/s10853-009-3850-8 ↗
13. Ni · J. Mater. Sci. · 2007 · 42 · 103710.1007/s10853-006-1431-7 ↗
14. Feng · J. Appl. Phys. · 2005 · 95 · 2902
15. Kobayashi · Appl. Phys. Lett. · 2005 · 87 · 03290210.1063/1.1997278 ↗
16. Sinclair · Appl. Phys. Lett. · 2002 · 80 · 215310.1063/1.1463211 ↗
17. Li · Solid State Commun. · 2005 · 135 · 26010.1016/j.ssc.2005.04.028 ↗
18. Lin · Appl. Phys. Lett. · 2006 · 88 · 17290210.1063/1.2198479 ↗
19. Schilling · Phys. Rev. B · 2006 · 74 · 02411510.1103/PhysRevB.74.024115 ↗
20. Xue · J. Alloys Compd. · 2009 · 482 · L1410.1016/j.jallcom.2009.03.190 ↗
21. Feng · Phys. Status Solidi A · 2006 · 203 · R2210.1002/pssa.200622038 ↗
22. Adams · Adv. Mater. · 2002 · 14 · 132110.1002/1521-4095(20020916)14:18<1321::AID-ADMA1321>3.0.CO;2-P ↗