Tin dioxide nanoparticles: Reverse micellar synthesis and gas sensing properties

Tin dioxide (SnO 2 ) nanoparticles have been synthesized by reverse micellar route using cetyltrimethyl ammoniumbromide (CTAB) as the surfactant. Monophasic tin dioxide (SnO 2 ) was obtained using NaOH as the precipitation agent at 60 °C, however, when liquor NH 3 was used as precipitating agent then crystalline SnO 2 nanoparticles are obtained at 500 °C. SnO 2 prepared using NaOH show crystallite size of 4 and 12 nm after heating at 60 and 500 °C respectively using X-ray line broadening studies. Transmission electron microscopy (TEM) studies show agglomerated particles of sizes 70 and 150 nm, respectively. The grain size was found to be 6-8 nm after heating the precursor obtained (using liquor NH 3 ) at 500 °C by X-ray line broadening and the TEM studies. Dynamic light-scattering (DLS) studies show the aggregates of SnO 2 nanoparticles with uniform size distribution. Mossbauer studies show an increase of s-electron density at the Sn sites compared to bulk SnO 2 and a finite quadrupole splitting indicative of lowering of symmetry around tin atoms. The gas sensing characteristics have also been investigated using n-butane which show high sensitivity and fast recovery time.