Surface and related bulk properties of titania nanoparticles recovered from aramid–titania hybrid films: A novel attempt

Highlights: ► Aramid–titania hybrid films (5 and 10 wt%-TiO{sub 2}) were prepared via sol–gel processing. ► 450 °C calcination of the films yield anatase-TiO{sub 2} nanoparticles of rod-like morphology. ► The titania nanoparticle, crystal structure, high surface area are stable up to 800 °C. ► The novel approach has the advantage of nearly 100% recovery of titania. ► Increasing calcination temperature up to 1100 °C triggers anatase → rutile transition. -- Abstract: 5 and 10 wt%-TiO{sub 2}-containing aramid–titania hybrid films were prepared using sol–gel processing improved by the inclusion of 3-isocyanato-propyltriethoxysilane (ICTOS) to strengthen bonding of the titania species to the polymer backbone and, hence, lessen its agglomeration. The films were thermally degraded by heating at 450 °C in a dynamic atmosphere of air. The solid residues were found by thermogravimetry, X-ray diffractometry and electron microscopy to consist dominantly of uniformly agglomerated rod-like anatase-TiO{sub 2} nanoparticles, irrespective of the titania content of the film. The recovered titania particle morphology and surface microstructure were examined by field emission scanning and high-resolution transmission electron microscopy, respectively. Whereas, the particle surface chemistry and texture were assessed, respectively, by means of X-ray photoelectron spectroscopy and N{sub 2} sorptiometry. The recovered titanias were found, irrespectivemore » of the film content of titania, to enjoy not only a high temperature (up to 800 °C) stable nanoscopic anatase bulk structure, but also a high-temperature stable surface chemical composition (lattice Ti{sup 4+} and O{sup 2−}, and adsorbed OH/CH{sub x} species), (101)-faceted microstructure and highly accessible (145–112 m{sup 2}/g), uniform mesoporous texture with average pore diameter in the narrow range of 3.9–6.3 nm. Increasing the calcination temperature up to 1100 °C enhances an anatase → rutile transition, the extent of which is larger the higher the titania content of the film.« less